Your cart is empty.
Your cart is empty.Suspension designs that utilize control arms offer several benefits over solid-axle designs. However, the bushings that serve as the pivot points for the control arms get a real work out, and over time, they wear out. Symptoms of worn control arm bushings include suspension noise and clunking while cornering and the inability to hold an alignment. Daystar Control Arm Bushings are a significant upgrade over the rubber bushings most suspension systems use because they are resistant to vehicle fluids and road grime. They offer less deflection under load and superior wear characteristics. These bushings make the perfect upgrade when replacing worn factory bushings and for high-load applications, such as heavy hauling or vehicles that frequently go off-road.
David Le
2025-08-18 21:28:02
I've installed these on Toyota Sequoia and they do require some custom fitting to reuse the OEM bushing sleeves. The reason for this is because the oem sleeve has large surface area plate to be able to brace up inside the slotted frame brackets. If you choose to use the included bushing inner sleeve it won't hold up to off-road use. The arms will shift out of place and flare out the frame bracket slots. Also I feel this kit should be offered as a lower bushings kit without uppers. I've worked on Toyota's for decades and the upper arm bushings don't fail, just the lowers do.
Guybythelake
2025-08-04 15:06:24
Awesome bushings. Huge difference in the truck, coupled with other new parts.A little difficult to remove the old bushings but new install was easy.
808XJ
2025-07-24 21:43:25
Installed in my 2002 sequoia. Vehicle has 108k and the factory bushings were cracked and dried out. This kit came with upper and lower bushings and upper ball joint dust boots. The vehicle has a solid feel to it and the steering response is much better. However the ride is a bit more rough and road feedback is felt more, but the trade off is worth it in my opinion. The worst part with the install was burning out the factory rubber bushings. Some tools needed propane torch and a wire wheel brush to clean the rubber from the sleeves prior to install. Wish it came with more lube. Buy more before you attempt to install these and make sure to use a lot of the supplied type of lube
c3po
2025-07-04 14:14:00
Wish they gave more lube. That's Only reason 4 stars. Been in half year seem to be holding up well. !!!!!UPDATE!!!!!! bushings have become loose and now i get a lot of noise when backing up or taking off. prob has my alignment off too. do not buy if you need these parts to last i now have to buy new control arms after doing all that work burning all the old bushings out and installing these.
Customer
2025-06-28 14:40:00
Get these for off-road for sure even if you factory ones wear out still use these for first shot 01 Sequoia
ARTURO AYALA
2025-06-03 13:14:51
No description on what is what
Anthony McEwan
2025-05-24 13:52:28
Tighted my front suspension up nicely granted I totally rebuilt it but I think these helped
Tony
2025-01-16 10:18:18
Very dificult to replace. Are rhe bushing only. You have use tour metal parts. I don’t use it.
Customer
2024-12-23 21:55:07
Mechanic didn't read instructions before installing, and he removed the stock bushings with sleeves. I was forced to buy new stock ones and now I have this kit to remind me of the whole terrible experience.
Recommended Products
