Your cart is empty.
Your cart is empty.
The pump is suitable for Bottom-Loading Water Dispensers, Hot & Cold Water dispensers, Refrigerators, Ice makers, Coffee machines, Fish tanks, Tea machines, DIY projects, etc.
Load noise:≤50dBA
Small size: Approx. 3" * Dia. 1"
Low power consumption: Load current: ≤300mA
Low heat: It can work continuously for a long time and won't be hot!
Stable performance, Long life
Alan Wheeler
2025-07-30 14:20:46
Easy to install and worked great
BKPerez
2025-07-23 16:07:43
After multiple tailgating seasons in the Texas heat, my Arctic Cove Mister finally failed me. I took it apart and found the pump's diaphragm was broken. Found this replacement and it was perfect for this situation. I was back up and running before the next home game tailgate.
hi
2025-05-19 14:17:17
My countertop ice maker failed. So I diagnosed the problem to be the pump easily by removing the tubing at the output of the pump……no water:). I measured the old this was same size. I removed the old, looked at the tech specs on the old and found this one matched. Ordered it. Was delivered quickly. Had to solder the wires of the old pump to the new one. Reconnected all powered up ice maker. And works beautifully.
Edward J Echeverria
2025-04-01 12:02:35
It fit but had to modify the pump to fit also upgrade the screws that hold the motor to the pump. You should upgrade to stainless screws
Notta Bear Newfoundlands
2025-03-17 11:11:12
About a month ago my nugget icemaker, a Thereye brand from Amazon quit pumping water. Normally before an ice making cycle the ice machine will have a little trickle of water from where the ice comes out back to the reservoir, I noticed that it wasn’t making ice and the reservoir was full. I assumed it was the pump or the water level switch, and after taking it all apart I was able to determine that it was in fact the pump. The part was affordable and seems to be a direct replacement for the pump in my ice maker. It has been in for a few weeks now and is running just like the original. The pump does need the original leads from the machine to be de-soldered and soldered on the new pump, as long as that is in your skill set and some basic troubleshooting skills I can say this is a great solution to a common problem with these machines. BTW this machine has the same internals as the GE opal nugget ice maker.
K. Wilson
2025-03-12 10:39:25
I'm keeping it cuz I'll lose my mind w/o ice (my ice machine takes the same pump as coffee machines). It squeals like a danger pig. Cant do a photo cuz the pump is installed in my Chefman Iceman maker, the ice maker is F K N phenomenal btw if youre an ice person....get one. It will change your life. I have the soft pellet style.
Smith Hayward
2025-01-25 11:43:04
Nugget ice maker stopped making ice, after lots of troubleshooting and nearly taking the entire machine apart, I finally figured out that the main pump was not working. Quick swap, no soldering even, and everything back up and running. Recommended for a little DC pump for small appliance repair or small water features.
Shawn G. Lynch
2025-01-17 17:46:53
Replaced pump in opal ice machine. Works great.
Nathalie circé
2025-01-15 16:54:43
Pas le bon morceau beaucoup plus petit
Recommended Products
