Your cart is empty.
Your cart is empty.Product Description
Cueball
2025-08-27 09:22:54
Well built. Used as a main battery cutoff for my solar system. Works great, looks great, good quality and value.
Ninja Turkey
2025-08-24 13:44:57
I use this as the battery cutoff to my solar charger/inverter. No complaints
RICHARD.
2025-08-20 15:01:34
good quality
V K
2025-08-15 11:10:18
If I was living in China, this product would get five stars but I'm not.1. the mounting screws are some Chinese tread so you will have to find your self new mounting screws2. the terminals will not accept bare wire, you must have a ring terminals soldered or crimped to the end of the wire to connect it to the breaker, not good.3. The terminals have Allen wrench bolts - not a screw driver like any other breaker but Allen wrench bolts; And the Allen wrench is metric. Really? Not US consumer friendly design.Besides that over all well build solid product for Chinese standard, the resistance between load and line terminals is zero which is excellent, very tight strong spring to hold the contacts together which is important - and yes I did opened it to see how is build.I didn't test the trip current but this will serve as a disconnect and short circuit protection, not an over load / current protection.
Enrique Mass
2025-08-11 12:31:36
Me encanto y a buen precio
Erin Barnett
2025-07-19 16:57:02
Using this for a master battery disconnect for my shanty of an off grid solar setup. I should never see more that 75 amps of current through the system under normal use. Been in use for a month now and works perfectly.
Customer
2025-05-20 15:47:29
Perfect for my needs. I needed a disconnect for a small solar array. The breaker is made of high quality materials, and mounted easily in my weather tight box. I would use this breaker again.
Oliver Eichstaett
2025-05-04 18:43:13
bestens bin sehr zufrieden macht alles was angegeben und preiswert Danke
Brooke
2025-02-28 14:04:12
I purchased 2 of these (200A and 250A). Both have performed as expected. The 200A one has been continously run at over 150A for 6 months now and no issues. It does get a little warm with 180A plus. But well within tolerance. The switch has a nice feel when turning off and on. I did find the width of the terminal a little small for my 2/0 lugs. But when in place the terminals tighted firmly.
Tonino
2025-02-15 10:42:52
Molto valido ,di facile installazione.
César Colomo Grech
2025-02-04 13:01:56
Lo tengo conectando un Deye 8kw a unas baterÃas LiFePo de 30 kwh. Este "fusible" (no es un fusible exactamente aunque cumpla la misma función), protege las baterÃas de sobretensiones. Estoy contento con él.
Jeronimo
2025-02-02 10:53:38
Perfecto si sabes lo que buscas y lo que necesitas. Instalado y funcionamiento perfecto.
Recommended Products