For the price, this is a great general purpose power supply for electronic projects and many other applications. The displayed numbers are generally within 1% or +/- 1, whichever is greater. The displayed current when the power supply is in constant current mode can be inaccurate. In the sample I received, at low currents, the current it limits to is about 2mA less than the limit displayed. Strangely, at currents above 15mA, when the the supply is in CC mode, the current value displayed is the value of the current limit and not the measured current which is actually 2mA lower.The manual fails to explain a few features of the power supply. Turning the voltage knob changes the blinking voltage digit. To get a voltage digit to blink, you have to momentarily depress the voltage knob. The digit will blink for 3 seconds after it has been selected or changed. These rules make unintended voltage changes less likely. The current knob works the same way for setting currents. Voltage and current changes can be made at any time and are well behaved. I had a power supply that occasionally generated large voltage transients when being adjusted but this one doesn't do that. The documentation mentions Over Voltage Protection but doesn't say anything about its operation. If you press and hold the Voltage adjust knob for 3 seconds, it shows you that the OVP is enabled and set to 33V. You can't disable it or change the voltage and the OVP light is always on. This is not a very useful feature since the only way the output can get to 33V is by being driven by an external power source. When the over voltage is detected, the supply disables the output and the OVP indicator blinks but the supply can't do anything to reduce the output voltage. The Over Current Protection can be enabled and disabled and the threshold is separate from the CC mode current setting. It can be set by tapping the current knob to get to the digits of the current display after the long press of the knob that takes you to the place in the UI where you can turn OCP on and off. The description and manual also tell you how to enable and disable OPN but they don't say what OPN is. It appears to control the state of the output when the unit is first powered up. When enabled, the output will be enabled after power up and, when disabled, the output is disabled after power up. When enabled, you can put the supply on a timer or a smart plug and have it power something with the same settings it had when it was powered off, when it gets power.Here are some technical details about the supply that may not interest most readers. There are two general types of power supplies: switching and linear. Although the description doesn't say it, this is a switching power supply and that comes with some pros and cons. The pros are lighter weight, higher efficiency and low cost. The cons are more electrical noise on the output and poor transient response. The implementation of this supply does a good job minimizing the cons but they're still present. At high load currents, noise from internal switching results in very brief 50mV spikes in the output voltage. The spikes are smaller at lower output currents and probably won't cause problems in most applications. 10A transients in load current result in 300mV jumps in the output voltage. I have attached scope captures of the noise and the voltage transient.The output has 2000uF of capacitance fed through a current measuring shut by a switching power supply with 3300uF of output capacitor in parallel with a 660 Ohm resistor. Note that turn on voltage ramp will be limited by the current limit and the 2000uF output capacitor in some configurations. Note also that there is no additional circuitry to disconnect the load from the power supply. When the output is turned off by the user or a protection feature, the switching power supply is simply disabled. Thus, if there is no load when the output gets disabled, the output voltage decays like a 660 Ohm resistor in parallel with a 5300uF capacitor over many seconds. The large output capacitance can be a little dangerous if you're not careful when using the current limit feature. For example, you can use the power supply to light an LED by setting the output voltage to a voltage higher than the LED's required voltage and setting the current limit to the current you want to drive the LED at. This will work fine if you connect the LED with the power supply disabled and then enable it. However, if you set the voltage much higher than the LED's working voltage, enable the supply and then connect the LED, the output capacitance will be charged to the high voltage before the LED is connected and will discharge through the LED when it gets connected; the constant current feature can't limit the resulting current surge. This could damage the LED.

I don't do many reviews but when you get something really decent I feel obligated. Been using the heck out of it (24hrs a day for a week) since I got it and holding up well. Have not pushed it to full amperage/voltage for that whole period but have hit the limits with good response/recovery. Over-current setting works fine as does the short circuit. Adjustment is very quick, easy and accurate with the digit-by-digit control instead of a lousy pot (or coarse ans fine fine pot) on most of these. Build quality & fit and finish is very good, honestly better than I expected for the price. Fan kicks in as needed to cool, not too loud but I do have a quiet replacement fan I'm going to put in after this project is done. Beats the snot out of the one I bought just 2 years ago for only $10 less that never did work decent and gave up the ghost which caused me to buy this one, actually happy it did. It will be a fine addition to the benchtop when I actually use it for circuit testing and other projects instead of just battery charging (which is probably the most abusing thing you can do to a power supply). Can't speak to longevity so we"ll see how it goes.

At first, I did not know whether I'd be happy with setting each voltage digit separately, or with powering the unit with yet another switch for enabling power to the banana jacks.Well, setting the voltage is fast enough, and monitoring current and wattage has been a breeze, thanks to the quite accurate wattage display. (Volts x Amps = watts). Anyhow, the 2nd switch to enable power has already saved me once.I've used it primarily to power 24V 3D printer hot ends outside of the printer to address clogs or the inevitable blob of filament encasing the hot end from a print gone horribly wrong. The hot end is powered at 24V while monitoring the temp with the thermocouple connected to my DVM. Once it reached the target temp of 300C, it's easy to dial back the voltage to 12-14V, as needed, to hold the hot end at the desired temp. It's also used to power the onboard systems of my giant scale RC aircraft when working on the bench during setup, rather than using the batteries.A really good buy, and nicely made. Recommended.

I didn't know I needed one of these until I started testing & evaluating offroad lighting for Jeeps and other 4x4s. It was a game changer to be able to see the actual wattage in use, vary the voltage and to see if the claims made by the seller were accurate. The price of this bench-top model was about $60 and which made it an affordable piece of kit. I'm already coming up with new ways to use it in a test environment before actually installing different products. So far, so good. I like it.

This is a must for your bench if your in to electronics as a hobby. It accurate against my multimeter and oscilloscope. No longer burning stuff out because you can dial in the voltage and current limits. Next project will need a larger one so definitely will get one by these folks when I get to it.Customer service is quick. I used the email on the manual because I thought it stopped working and they replied within a couple hours. They asked me to make a video and when I set up a test I found out one of my leads broke internally so that was on me. Very good and handy product.

Muito bom o produto

El producto es como lo describió el vendedor, y si me sirve para mí trabajó que es la reparación de celulares

I purchased this power supply for tinkering around with electronics. It is pretty easy to use once you understand the buttons and interface. I have been using it for 3 months intermittently without issue. I would recommend this product.

Fonctionne parfaitement , bon produit

Das Jesverty Labornetzteil DC Regelbar (30 V, 10 A) ist ein vielseitiges und präzises Gerät, ideal für den Einsatz in Laboren, Werkstätten oder für Elektronik-Enthusiasten. Mit einer Ausgangsspannung von 0 bis 30 Volt und einem Strombereich von 0 bis 10 Ampere bietet es eine flexible Spannungs- und Stromversorgung für verschiedene Anwendungen.Hauptmerkmale:Präzise Einstellung: Dank der fein justierbaren Regler können Spannung und Stromstärke exakt eingestellt werden, was für empfindliche elektronische Arbeiten unerlässlich ist.4-stelliges LED-Display: Das große, helle Display zeigt die aktuellen Werte für Spannung, Stromstärke und Leistung in Echtzeit an, wodurch eine genaue Überwachung ermöglicht wird.Sicherheitsfunktionen: Ausgestattet mit Überspannungs-, Überstrom- und Überhitzungsschutz gewährleistet das Netzteil einen sicheren Betrieb und schützt sowohl das Gerät als auch die angeschlossenen Komponenten.Kompaktes Design: Trotz seiner Leistungsfähigkeit ist das Netzteil kompakt gebaut und passt somit problemlos auf jeden Arbeitstisch.Anwendungsbereiche:Dieses Labornetzteil eignet sich hervorragend für Tests und Reparaturen von elektronischen Geräten, Entwicklung von Schaltungen, Ladeanwendungen und andere Projekte, die eine stabile und einstellbare Gleichstromversorgung erfordern.Kundenbewertungen:Nutzer loben die zuverlässige Leistung und die einfache Handhabung des Jesverty Labornetzteils. Besonders hervorgehoben werden die präzisen Einstellmöglichkeiten und das gut ablesbare Display. Einige Anwender weisen darauf hin, dass der Lüfter bei höheren Lasten hörbar ist, was jedoch die Funktionalität nicht beeinträchtigt.Fazit:Das Jesverty Labornetzteil DC Regelbar (30 V, 10 A) bietet ein ausgezeichnetes Preis-Leistungs-Verhältnis für alle, die eine zuverlässige und flexible Stromversorgung für ihre Projekte benötigen. Mit seinen umfangreichen Funktionen und Sicherheitsmerkmalen ist es eine empfehlenswerte Investition für Profis und Hobbyisten gleichermaßen.