Your cart is empty.
Your cart is empty.Product Description
Material
DERNORD 3-way ball valve with PTFE (Teflon) seats & seals is made of stainless steel 304. It offers excellent corrosion resistance for most applications. Heavy duty handle with blue vinyl insulation.
1/4 turn
The handle of DERNORD 3-way ball valve can be rotated 90°. The L-shaped ball valve can only connect two lines that are perpendicular to each other.
Working Pressure
Available in both Wog200 and Wog1000. Wog200 are considered ideal for most general applications. Wog1000 are for high pressure and industrial applications where of the valve are preferred.
Serviceable & Durable Valve
This DERNORD stainless steel ball valve can be taken apart via threads, it makes ball valves easy to clean. These ball valves are fitted with tight seals to ensure no leakage and a long lasting seal after many years of frequent usage.
Application
Stainless steel & PTFE work well in applications including but not limited to water, oil, gas/air, light alkali's and acids, biodiesel, fuels and alcohols. This ball valve can be used in petroleum, chemical, electricity, household, construction, etc.
ABH3
2025-08-29 12:51:37
I used two of these for an auxiliary fuel tank on my diesel pickup, one for supply and the other for return. Works great at a fraction of what one valve to do the same would cost. I modified the handle so there is an ‘off’ position as well for cheap anti-theft as well!
J. Weston
2025-08-06 13:24:51
Nice stainless steel ball valve. Being used to switch between fuel tanks, we'll see how it does.
ed
2025-05-20 11:48:44
This piece is made very well, and will probably last forever. But it doesn't work for me, so I returned it. The openings in the ball valve are about 1" diameter (for a nominal 1.25" valve), and the lever takes a lot of force to move. I wanted this for high-flow water transfer, so the small valve size is a problem. It would cut the flow rate by more than 50% compared to a true 1.25" valve. And my application is with PVC plumbing that doesn't have a lot of support, so the stiff valve would risk breaking some of the PVC connections. I ended up using individual valves and a tee, which wasn't as compact, but saved some money.
kma
2025-05-06 19:19:34
The valve is easy to use and the arrows on the top make it easy to tell you the direction the flow is going. Purchased adapters that screwed into the valve for the condensate lines to attach. Makes the flow change easy and reliable for the flow direction. I would purchase again.
Dewey
2025-04-27 10:32:00
Works well
Dean
2025-04-19 09:50:47
Na
Tec1diver
2025-04-18 13:33:24
Found that there was a pin hole leak in the valve body. Bad casting don't recommend.
Jeanpaul Michel
2025-04-03 17:34:25
Delivered on time. Good packaging. Item as described.
Luc Pinsonneault
2025-03-29 10:41:27
It is a poor quality valve even if it weight a ton and looks sturdy. Instaled with pvc pipe and after 10-20 min it started leaking from valve body working with well water à around 50-60 psiFar from the 1000 psi it’s supposed to handle
Jerry Veitch
2025-01-14 14:19:24
Seems to be very well constructed.
Jorge V.
2024-12-13 12:54:15
BUENA
ORH
2024-11-18 13:33:35
Excelente calidad comparada con una de material de latón más económica. Se instalaron al mismo tiempo y alrededor de un año fallo la de latón (color amarillo)
Recommended Products
$27.75
$ 12 .99 $12.99