Your cart is empty.
Your cart is empty.Design Engineering Heat Sheath is an aluminized sleeving sesigned to slide over wires, cables and hoses. Heat Sheath provides ultimate protection from extreme heat as well as chemical and oil spills, dirt, grease and road grime. Constructed from a high temperature fabric and bonded to an aluminized material to reflect heat. Heat Sheath is fireproof and withstands direct heat up to 500 degrees Fahrenheit.
Tyler timmons
2025-09-06 10:04:17
Had to run a starter wire on my Mustang an inch from the headers. Was uncomfortable with leaving it unprotected so I did this. Been running 2 months no problem
TK17472
2025-09-02 10:54:31
I used this heat sleeve to cover metal fuel line in my classic car that was having some vapor lock issues. This along with some custom-made shields for the fuel pump seem to fix my issue. Great product and brand-name, would buy again if needed.
Tazshd
2025-08-24 18:28:34
Good quality time will tell how well it works.
RedRubicon
2025-08-16 09:03:53
A+
Mike M
2025-08-11 13:58:36
I ordered this item to wrap the fuel line on my boat. I measure 5/16 ID and figured 1/2" wrap would quite suffice. I should have gotten 3/4 wrap. I had to split, then tie wrap around the hose. Good outcome after applying some ingenuity.
Customer
2025-07-14 20:37:47
I used this on the wires that go to the starter on a 2008 Jeep Wrangler. The insulation on the wire that energizes the starter solenoid had melted even with the factory starter heat shield in place. This Jeep has a design problem because the catalytic converters are very close to the starter. This heat shield work great for this application and solved the problem.
Allen S.
2025-05-23 10:12:59
Well made. Seems to do a good job so far.
Mario G.
2025-05-09 12:54:57
for my pick up
Owen D
2025-04-10 18:57:00
Used to keep parts of a wiring harness and fuel lines protected in high temperature areas. Works as it should and easy enough to work with.
Paul Simmons
2025-02-21 14:58:09
In DEI packaging. Real product. Worked great
Nicholas Kohner
2025-02-20 13:21:14
Easy to use had some wires the melting after being to close to the exhaust. But the wire bundle in the sealed tube and no issues with wires melting
Customer
2025-02-11 18:40:09
Put on my fuel line and it is doing what it is supposed to be doing. Fuel is cooler going into the Carb, confident vapor lock won't be an issue any more.
William Smith
2025-02-10 20:01:56
Took care of my vapour lock problem
Recommended Products
