Your cart is empty.
Your cart is empty.Precise cutting edges to reduce splintering. Brad point tip reduces walking. Brad point tip reduces walking. Engineered flutes for clean effective chip removal. Engineered flutes for clean effective chip removal.
Joseph A.
September 4, 2025
I generally don't buy single bits, but I use 5/16" brad points a lot for clearance holes for 1/4" bolts. My existing bit had developed a wobble that was missing center and elongating holes (and vibrating). This bit runs true, cuts well, and makes more sense than buying an entire set to get one bit.
Ryan Hazzard
August 26, 2025
Works great for tapping maples for sap.
Matt
August 22, 2025
Received this bit new in the package. Upon opening it and chucking it up in the drill, I was amazed at how crooked this bit was and how much it wobbled. I removed the bit to be sure there was nothing in the chuck, but upon putting it back in the chuck, it ran the same way. Resulted in an over sized hole in the hardwood I was drilling. Would not recommend buying this product.
KS
August 15, 2025
For a car. Drives pretty straight.
R. Fast
June 6, 2025
The drill did a nice job of drilling into maple trees so I could then tap the tree. Drills specifically designed for tree taps may do a better job of clearing out wood while drilling, but this did a good enough job. I just had to pull it out a couple times during drilling to clear out debris. All of the taps worked fine, no clogs.
Customer
March 19, 2025
I like them for tapping maple trees all I use them for
Niner
February 18, 2025
Broke after couple weeks. But was only 4.99
RBorg
February 17, 2025
I use these 5/16" bits to drill logs for mushroom spawn plugs. Works well for that.
Saty
January 22, 2025
used these for tapping my trees. worked very well. keeps the hole clean and perfectly straight.
Recommended Products
