Your cart is empty.
Your cart is empty.Dewalt Right Angle Adapter 2 In 1 Attachment Dwamraft Metal
Cliff Alexander
2025-08-17 17:06:17
I needed a 90 degree adapter to install brackets inside a "can" light and my old adapter was to big and would not work. After checking out a number of options this adapter from DeWalt seemed to be the best option. I was not wrong. It worked like a charm and saved the day. It is well constructed and can be used with an included handle and an extension. The instructions were pretty much non-existent but it was easy to figure everything out. I would have appreciated a small storage bag to keep the three pieces together in my tool box but that is a minor gripe. I highly recommend this adapter to anyone needing one.
I. M. Stern
2025-08-12 14:08:10
Happy with this tool. Has worked well so far, and price wise was good.Any issues and I'll update my review.
Customer
2025-08-07 14:36:25
Fantastic device to have. Worth the extra money over cheaper alternatives, I promise you. I've tried a couple and this was the best; It didn't break the first time I used it!
M. Daneker
2025-06-01 18:58:23
This is a useful DIY tool, would die in a day on a job sight. The 90 is usable with handle but the extension doesn't connect with the handle. The plastic connections are not he best, recommend for light, at home use.
jbrew2001
2025-04-16 13:16:22
Please excuse a little bit of a rant.I can never understand why people would complain about well thought out features that greatly enhance a product without taking the time to figure out how it works.This product is a perfect example. When using a stubby bit, it sticks out just enough to slip on a screw head. The screw is held very nicely by magnets. This arrangement Allows working in the tightest possible spaces.With any right angle attachment the driving torque is at right angle to the screw, so it is necessary to hold the driver with one hand and hold the right angle attachment with the other hand. Having the screw held on by magnetism is an excellent feature - your third hand.The complaints about removing the bit from the tool are groundless. Simply take one of your screws and poke into the hole in the back of the tool-head and the bit will pop right out.All of these features are well thought out to make the tool easy to use and able to fit into a minimal space. I can’t even imagine the frustration I would have trying to place a screw in a tight area without the magnetic holding feature.I spent the extra few bucks for the 2 in 1 version and I’m glad I did. It has more uses for sure.BTW, the build quality is very good, and it easily handles impact driving. I expect to use it a lot for a long time.
Betty Indeed
2025-04-04 21:31:37
Good tool to have when you need it. Good 90 degree work
DDuncan3
2025-03-05 13:14:03
I use this everyday. The quality is great. I use it with an impact drill and have no problems with it. The magnet strength is nice. I do admit that i haven't used the separated smaller portion of the tool. Amazon had the best price on this tool also.
Daryl L. Lavway
2025-02-19 16:59:50
Perfect for my building projects in tight spaces…..I’m retired and enjoy projects around the house and property and this is a good addition to my tool set.
CP262
2025-02-14 17:58:15
Bought as a gift so I personally wouldn't have a clue but the recipient says its great!
Frank Wil
2025-01-18 14:33:25
Okay, this works well, and can fit into a tight space. Tight enough that the drill body offset (photo) counts. As do the length of bits, shorten drill bits as needed. Used standard screwdriver bit (#2 Robertson - square drive) to access screws 12 inches inside a 75 mm wide slot, worked very nicely.Not intended for heavy duty work or all day work. In wood, I wouldn't use this for more than 1" drill bit. Drill lightly with controlled feed. Not for busting lug nuts on the car!Well made good tool, small and I like it!
Leonardo Soares
2025-01-17 20:14:35
O produto é muito bem construÃdo e funciona perfeitamente para a tarefa
Kermit77
2025-01-09 14:55:45
Emballage okEnvoi okCher et à la réception on voit sur l'emballage que ça ne peut etre utilisé que avec des machines à percussion? Ce n'est pas mon intention donc je suis curieux de voir ce que ça change.
Reno
2024-12-13 14:28:47
Après avoir achevé mon ancien renvois d’angle sur de la vis 120 dans une charpente, après hésitation mon choix s’est porté sur ce modèle Dewalt.Et bien je ne regrette pas du tout ce choix car la solidité est au rdv mais avec en plus des innovations pertinentes qui apportent un vrai plus.Déjà au niveau encombrement c’est le modèle qui pourra être utilisé dans les espaces les plus restreints grâce à sa taille d’une part mais aussi grâce à un emplacement d’embout où celui-ci rentre presque complètement ne laissant à peine dépasser la pointe suffisante pour l’empreinte de la tête de vis.Pour sortir l’embout il faudra prendre un tourne vis et pousser l’aimant pas l’arrière de la tête.Ensuite le corps dû renvois d’angle se défait simplement à l’aide d’un système de clips pratique et durable afin d’avoir seulement la tête que l’on peut utiliser à l’aide de la poignée qui se visse et qui offre une excellente prise en main.L’aimant de l’embout est très puissant et pourra bien maintenir n’importe quelle vis.Enfin les roulements paraissent très solides et sont efficaces.Utilisation professionnelle cet outils me paraît parfaitement adapté à cet usage et je suis confiant pour les prochaines vis de charpentes bien qu’il faille mieux éviter ce genre de chose quand c’est possible.En tous les cas un outils pas très encombrant et indispensable à avoir dans sa caisse de vis ou de visseuse.J’espère que mon commentaire pourra vous être utile, cdlt.
Recommended Products
$30.77
$ 14 .99 $14.99