Your cart is empty.
Your cart is empty.Product Description
Backlight Display
The backlight display function of 36D allows users to read the values clearly in low light or dim conditions, making it easy for users to use.
Low Battery Indicator
When the low battery symbol is displayed on the LCD, it means that the battery operating voltage is low and should be replaced in time.
Doug Henderson
2025-09-04 18:07:09
Great for checking A/C caps .. very accurate.
Tom M
2025-09-01 18:19:02
This was an inexpensive tester but it works great. Tried several tests on various capacitors and it gave reading that were consisitent with the value of the capacitor. Came with a small screwdriver to open the cover and a good set of instructions. Also, test leads were long enough to facilitate use in tight locations. I would recommend this tester if you are seeking a cheaper unit that you will use occasionally.
T32ABOVE
2025-07-16 14:57:48
I like that this only does capacitors. I don’t like the fact that if you have no idea what value capacitors you are checking that you have to keep turning the controller until there is a reading. Also, even though you choose the level of capacitor you are checking it would be nice if the screen displayed the value. Example: pF, mF, nF, MF,.
Jim Lane
2025-07-11 10:48:13
I've had submersible deep well pumps for 40 years. My well pump sounded funny and quit. No water sucks and so does a $3,000 replacement cost. Turns out that after finding a loaner meter I found it had a bad starter capacitor. $15 and back in business!. Nnow I have my own easy to use meter. Makes me wonder if I had replaced previous well pumps when all I needed was a start or run capacitor. Who ever has a deep well pump with control box should check capacitors with this meter before panicking. Capacitors are inexpensive and do go bad. Jim
OTG w/chickens
2025-06-08 13:50:40
I bought this device thinking I could test capacitors on the circuit board, but that is not the case with this. It is meant for testing capacitors but only when they are not connected to a circuit. An ESR meter is meant for testing capacitors while on the circuit. FYI! Other than that, this device works good and seems like a good value.
Customer
2025-05-09 19:55:32
The media could not be loaded.
Jerry
2025-05-02 11:08:55
As an electrician and HVAC repairman, I need this device often. Recently, thanks to him, I discovered a non-working compressor in the AC outer unit, where there was only a slight decrease in the capacity of the compressor branch and no change for the fan, so apparently everything was fine, but the compressor was not working. The customer was happy because the big HVAC company told them that the fault is dificult to detect and they need to prepare several thousand dollars. This device made the repair a few bucks. I am really satisfied with this device.
Richard H.
2025-04-26 14:45:53
It works, what else can I say!
charles
2025-03-29 12:10:20
perfect inexpensive test meter..
Customer
2025-01-27 15:34:09
used to test some doubtful caps
d.s.roxburgh
2025-01-15 12:07:11
Well made for the price and does what it says
NAME_NOT_RETTomURNED
2025-01-10 13:26:52
The meter functions very well. The case is inexpensive a nd the directions are poor but it appears to function well. I would recommend it.
Recommended Products