Your cart is empty.
Your cart is empty. Product name: Push-fit Disconnect Clip
Color: Orange
Material: Plastic
Size: 1/4 inch, 3/8 inch, 1/2 inch, 3/4 inch, 1 inch
Installation tips:
1 Gently cut tubing squarely while maintaining tubing roundness.
2 Remove abrasions & deformations from tubing exterior that may inhibit tight O-ring seal.
3 If tubing’s already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) – To remove stiffener safely, release grip ring contact with disconnect clip while pulling stiffener with pliers.
4 For easier install-Apply stiffener to flexible tubing types before inserting into the coupling.
5 Mark 1” insertion depth on the tubing to indicate when tubing seats properly beyond O-ring.
6 Push tubing beyond O-Ring for watertight seal - Observing mark ends up near coupling body.
7 Disconnecting – While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull.
Note:
1 Small products, please keep away from children to prevent swallowing.
2 Manual measurement, please allow slight errors on size.
You will received:
5pcs Disconnect Clips
PATRICK EVANS
2025-06-06 11:09:29
I like the price but there should be 2 of each size
John zhang
2025-05-29 14:48:12
Perfect
Customer
2024-12-28 12:12:30
Much more compression is necessary to release the lock then you can provide with these (working on 3/4â€)
Recommended Products
