Your cart is empty.
Your cart is empty.Product Description
We take pride in manufacturing the highest quality dash cam adapters.
Unlike adapters that involve hiding and wrapping wires around your car (or worse – leaving them dangling across your windshield), Dongar adapters plug directly into your rearview mirror, ensuring a hassle-free setup and distraction-free driving for you.
Install as easy as 1...2...3
Check your compatibility
Before ordering, confirm your vehicle's compatibility by using our compatibility chart.
Plug in the adapter
Installation is simple! With your vehicle turned off, simply unplug the power source from your rearview mirror and replace it with the Dongar Dash Cam Power Adapter. To do this you can depress the plastic push tabs on the connector and unplug it from the mirror.
Dual power design
Once your adapter is connected to your mirror, plug both your Dash Cam and original power source into the adapter. Our dual power design provides power to both your dash cam and your mirror.
Bobby
2025-07-06 12:00:54
I only wish I had found this product a long time ago. It's very to install in a Gen-3 Tacoma and works perfectly.
SP Brown
2025-06-17 17:36:05
I almost ordered one of these for my previous truck but the reviews warning of blown fuses and CE codes after install made me hesitate. I really wanted to install a dashcam in my new truck so I finally ordered one to give it a shot.My truck is a 2021 Tacoma TRD Sport DCSB with premium and tech. My dashcam is an older (2018) Aukey DR02 that takes a mini USB cable for power. I read that others were successfully using the mini Garmin cams, but figured my dashcam is pretty small and basic (no WiFi, no GPS, no rearview cam) so the power requirements would likely be similar.Install takes all of 5 minutes and everything you need is in the box. I wish Dongar disclosed in the listing that they include a 6 inch mini USB & a 6 inch micro USB cable because I ordered short cables separately. Either way, a nice add-on to include in the box.Install goes like this:1. Clean your windshield.2. Align and place the adhesive pad (or suction cup) for your dashcam behind the mirror.3. Unplug the 12-pin connector from the back of your mirror.4. Plug the Dongar adapter into your mirror where you just removed the OEM cable.5. Plug the OEM cable back into the 12-pin port on the Dongar adapter.6. Plug the USB cable into the Dongar adapter and into your dashcam.7. THEN start or power up accessory mode in your truck.I've checked the adapter's temperature after use (again, due to warnings in reviews here) and it's nice and cool as it should be. My guess is folks who had issues with it running hot or blowing fuses are using devices that draw a lot of power thus overloading the adapter. Everything so far works as described and it's a nice clean install with no wires hanging and no ports below permanently in use by the dashcam.As an alternative to a traditional hard-wire install, which some might not be comfortable or capable of doing, this little adapter is the way to go and a nice mod for under $35.
Jason Vogel
2025-06-06 15:46:36
Got it to run a Roav dash cam. Was plug and play, no issues at all. Just make sure you get the right one for your situation.
Frequent Customer
2025-05-20 18:46:04
As long as you Camry has the electrical auto dimming mirror with a direction indicator this will work, it was an optional feature so it will not work on all models by it works fine on my 2012 and 2016 since they both have this type of mirror installed. It is not designed to work with models where the plug is inside a casing (FitDVR is one model that work with those type of mirrors) instead of on the back where to place the box is not as obvious on a Camry. Also only get the if you do not want parking monitoring. This type of mirror is only supplied power when the car is running. If you live and work in a safe area this will work fine for you. I am using mine on a Viofo with the Starvis 2 sensor. It is significant upgrade from the older Sony sensor but that is for a different review, I just felt the need for context of application.Yes, the Camry uses 3 of the 12 pins, this adapter only connect 8 of the 12 but they include the 3 used on their auto dimming mirrors. Unplugging and plugging is easy. The type C connector fits tightly so I doubt it is ever falling out. I was not able to test the other three cable. All are fairly short to avoid a cable bundle behind the mirror.
Onivert
2025-05-18 09:24:48
Just got this after trying Dongars other adapter that just didn’t work well.This adapter snapped right in and worked immediately.I had read where it caused errors and that it would not allow the auto dimming to work on the powered rear view mirror. My auto dimming worked fine tonight while using the adapter and I have no errors on my dash.So far I’m very pleased with the product.
Alejandro Mendoza
2025-05-12 14:49:45
âï¸âï¸âï¸âï¸ Works Well, But Adhesive Could Be BetterThis dash cam power adapter does its job well—provides steady power and is easy to install. The cable length is great, and it keeps everything looking clean and organized. My only issue is that the adhesive started to wear off a bit after some time, so I had to reinforce it. Other than that, it’s a solid product and works as expected!
K. D. Andrew
2025-04-29 12:05:24
Love this adapter. Instead of having to run the line around the door etc. a quick connect and the dash cam is hooked up. If someone like me can figure it out, anyone can.
TechFreak
2025-04-26 14:30:30
I was looking to install a dash cam in my Outlander but none of these adapters list my car as compatible. I went and inspected my mirror harness and found it looked like this one. I to confirmed it with the product support for the manufacturer and after I sent them a pic they agreed it was compatible.Installation of the harness and my dash cam went super smooth. Perfect fit and everything is working great. I’m very happy with how neat and clean I was able to do the install. Completely worth the price.
sum9045
2025-04-20 11:12:23
Amazing product. A bit pricy but no messy wiring required. Plug and play set up.Works on my Mitsubishi Phev 2022 12 pin connection.
NT
2025-04-06 18:11:21
Grabbed this for my truck and install was really easy. Disconnect the stock power supply and connect with the dongar connector.Nice and low profile. Saves the hassles of running a wire to my fuse box for my dash cam.I have no issues with it overheating and no issues with the dash cam functioning. Dash cam shuts off when the vehicle is shut off and I have not experienced any battery drain. Works as it should with no errors. My auto dimming mirror still fully functional. Bit on the expensive side but to me it was worth it to not have a run of cables and routing it.
engle
2025-04-01 10:20:34
Works perfect. Clean install.
Steven J.
2025-03-24 13:15:16
I found this product while watching Youtube videos about Tacoma mods. This thing worked like a charm to discretely mount a dash cam behind my rearview mirror on a 2021 Taco. I didn't know it and bought my own but it came with a short USB mini cable as well. Overall this device looks well crafted and did exactly what it needed to do. Zero problems with it after 6 months of use. Guys at work are even starting to buy them for other vehicles after seeing my setup.
Serena
2025-02-09 12:59:09
Fits & works perfect with our Tacoma and Garmin Mini Dash2
Recommended Products
$28.99
$ 13 .99 $13.99