Your cart is empty.
Your cart is empty.Fuel filler neck leaking? This replacement fuel filler neck hose is engineered and thoroughly tested to match the original filler neck for specific vehicle years, makes and models for a reliable repair. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Ford F-150: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1993, 1994, 1995, 1996] - [Ford F-250: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1994, 1995, 1996] - [Ford F-350: 1980, 1981, 1982, 1983, 1984, 1985, 1986, 1987, 1988, 1989, 1990, 1991, 1992, 1994, 1995, 1996, 1997, 1998]
larry losey
2025-08-26 11:20:25
it was great product
SomeGuy
2025-07-09 14:01:46
Bought two of these to replace the homemade solution PO came up with. They fit for both the rear and midship tanks. In my trucks case, the flatbed angle iron gets pretty close to the rear tank so I had to take a small section of fuel injection hose, split it down the middle, and put it between the frame and this hose to prevent it from cutting through it over time.The frame of my truck could be a little too wide or something. Only option I had requires cutting holes in the first driver side board and letting the hose run down through it. Would prefer to mount it under the frame but gravity is a thing and you don’t get gas in the tank that way. YMMV, like I said it’s obviously a custom build. I’d still buy again if I needed to.
Steven B.
2025-07-03 10:11:36
Not a perfect fit, but can be trimmed to fit trucks with the single front tank - 1986 F150 regular cab with 8’ bed in my case.
R. Prosser
2025-05-28 17:33:08
RETURNED – Does not fit my year 1997 Ford F250HDAll Ford Trucks from year 1987 to year 1996 with dual tanks use the same body parts. You would think that a big company like Dorman could get the parts correct.
Michael
2025-05-09 15:17:02
92 Ford F-150. For those of you trying to replace the front gas tank filler neck hose, this will work - you just need to cut it to size. I took my chances with this one instead in case the one meant for the front was too short (I saw a few reviews on the other one stating this). Buy this one instead!
D Brooks
2025-05-06 14:08:39
1 7/8" Inside diameter as listed @ Dorman website specs.Pricey but it's for fuel, not for O2. (three times as much elsewhere)for these filler hoses and wire lined for safety, well worth buying for that reasonand staying safe.My summer heats here (131 degrees in my driveway alone, expand the fuel).fits 88 ford F150 custom 8 ft bed, "forward tank", not "rear tank" as listed.1 7/8" Inside diameter as listed @ Dorman website specs.My 88 is 1 7/8", hose a bit hard to find due to age...Dorman had it listed here at Amazon, and Dorman product was delivered, and not some other china knock off.
Noe
2025-04-11 18:10:27
Bueno
marelomo
2024-12-16 11:37:27
It fits
Nadezhda
2024-12-10 12:50:28
Doesn't fit my car would like to return still in original package
Dave Dawson
2024-12-01 13:33:01
it fitted my f100 well
Recommended Products
$42.72
$ 19 .99 $19.99