Shopping Cart

Your cart is empty.

Your cart is empty.

Dorman 600-908 Transfer Case Motor Compatible with Select Models

Free shipping on orders over $29.99

$121.95

$ 56 .99 $56.99

In Stock

About this item

  • Direct replacement - this transfer case motor fits and performs like the original motor on certain vehicle applications.Material:Metal
  • Durable construction - made with factory-style electrical connector and weathertight seal to prevent corrosion
  • 100% new - this transfer case motor is entirely new, not remanufactured like competitors
  • Quality assured - vehicle-specific application has been validation tested to ensure quality
  • Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool
  • Please check the “Amazon Confirmed Fit” bar at the top of this page before buying product to ensure this product works for your vehicle. If the “Amazon Confirmed Fit” bar has an “i” in a blue circle, this product has additional notes. Please hover over the “i” on the bar to see notes before making your purchase.


Transfer case stopped shifting between high and low ranges? Swap out a seized transfer case motor with this direct replacement. Designed to install and perform like the original motor, it uses a factory-style connector and is sealed for protection. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Cadillac Escalade: 2003, 2004, 2005] - [Chevrolet Silverado 1500: 2003, 2004, 2005] - [Chevrolet Suburban 1500: 2003, 2004, 2005] - [Chevrolet Tahoe: 2003, 2004, 2005] - [GMC Sierra 1500: 2003, 2004, 2005] - [GMC Yukon XL 1500: 2003, 2004, 2005] - [GMC Yukon: 2003, 2004, 2005] - [Hummer H2: 2003, 2004, 2005, 2006, 2007] - [Ram 1500: 2011, 2012, 2013, 2014, 2015, 2017, 2018] - [Ram 2500: 2014, 2015, 2016, 2017, 2018] - [Ram 3500: 2013, 2014, 2015, 2016, 2017, 2018] - [Ram 4500: 2013, 2014, 2015, 2016] - [Ram 5500: 2013, 2014, 2015, 2016]


Gary garrison
2025-09-05 14:17:46
worked perfect for my 2011 ram 1500. just need to de-pin the ground wire from old one and snap right into new connector. easy job. operates as designed 8 months later still
Andrew
2025-08-24 12:26:51
Installed a few months ago and used several times. So far, works just fine, though I haven't had it long or used it very much. Direct bolt on and appears to be of good quality. You will have to pull the pin out of the old plug and stick it into this one. You'll do so for every single part out there as FCA attached that last wire directly to the TC.
Mike DRushia
2025-08-06 14:37:41
works great no more service 4 wheel drive light on. Half the price of one at the parts store.
torrey rice
2025-08-03 18:58:40
Fits like factory works great
Janet
2025-07-28 10:01:21
I have a 2011 ram 1500 5.7 crew cab sport and have been without 4wd for about 6 to 8 months, every time I tried to put it into 4wd my service 4wd light was coming on and it would stay on awhile and then go off eventually, I took it to the dealership and they said that it was a bad drivetrain control module and wanted a ridiculous amount to change it, I ordered it myself and changed it and it didn't do anything, they said that they would have to rescan it but I was feed up with them ripping me off,after researching online I read an article that said if there's a problem with the 4wd that 95% of the time it's the transfer case motor so I said what the heck and tried this part and it fixed everything, now my 4wd works on every setting and it only took me 15 minutes to change, if you have a brown wire coming from the transfer case you have to take a screw driver and force it out and back into the new part but it was simple, hopefully someone else will be able to fix there truck without the aggravation of going to the stealership 😎update still works a long time later 👍
Customer
2025-07-10 17:54:26
Put part in and truck still wouldn’t go into 4 wheel drive had to take to dealership they said part was defective
R R
2025-06-12 15:40:18
Worked great. Same dimensions as the OEM on my 2011 Ram 1500. Just be aware, if you do not want to dismantle the entire transfer case, you'll need to remove the brown wire from the connector on the transfer case switch because it is wired directly into the transfer case through a grommet. You'll need a pin removal tool to push it out of the old connector and insert it into the Dorman connector. The position in the connector is open and in the appropriate location..
Hunter Frampton
2025-04-02 10:54:38
It fit perfect on a 2013 ram 4x4 hemi with the 6 speed transmission ( no auto 4x4 transfer case). It has held up great with no issues.
Darek .
2025-03-30 12:49:20
After replacing the damaged part with a new one, the problem disappeared . Received on time and good quality, I recommend .
Peter
2025-03-16 18:19:28
Right part makes it easy
spyro
2025-01-10 18:04:36
This was an easy install except for the one wire you will have to disassemble the old plug to remove. The thick brown wire. There are several videos on youtube to assist you. Other than that its a quick fix. just hope it lasts
Aaron Abar
2025-01-03 13:02:18
Direct bolt on replacement and no programming required...fixed my service 4wd light on my 17 ram 4500. 100% satisfied!
Customer
2024-12-07 09:25:27
Fit and worked perfectly on a 2017 Ram 5500
Recommended Products

$6.29

$ 2 .99 $2.99

4.6
Select Option

$139.50

$ 54 .99 $54.99

4.5
Select Option