Your cart is empty.
Your cart is empty.This exhaust manifold was precision-engineered and durably manufactured to match the fit and function of the original manifold on specified vehicles. It includes all necessary gaskets and downpipe hardware for a complete repair. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Chevrolet Captiva Sport: 2011, 2012] - [Chevrolet Equinox: 2010, 2011, 2012] - [GMC Terrain: 2010, 2011, 2012]
gerald J turenne
2025-09-05 15:01:31
Great price and delivery product fit just fine
angel-01
2025-07-13 17:26:28
Good product, works as expected. This was a no-problem part to install. It fit right on as expected and solved the problem caused by the wear and tear of the previous one. There has been no problem from the time of its installation up to the present. It's been good for the low price.
christy
2025-06-19 12:37:56
Great price and easy to install. Still working perfectly
Charney
2025-06-09 10:36:35
For the price this worked just fine. I could have bought the Delco brand one for twice the price but with the miles on the motor it just didnt pay. How long it will last is anyones guess. It is working for now. I just hope this one doesnt crack like the last one did. At least not for a while.
Luis Rivera
2025-06-08 19:01:49
This manifold was used on my 2010 Chevrolet Equinox with a 2.4 cylinder engine.The quality appears to be as good or better as oem. It fit perfectly and the mounting points for the heat shields lined up as they should. The gasket was also a quality piece and wasn't that perforated material that does not last. 5 stars!
JoeHon
2025-06-04 18:52:53
Piece of junk. Installed it and 3 days later I was tearing it apart for exhaust leaks.Took it apart and the surface that touches the head had a bunch a “goobers†holding it out causing an exhaust leak.Where’s my money for doing it twice?!
Alexander Duran
2025-05-25 12:06:07
Installed on a 2011 Chevrolet Equinox. Had the manifold off in about 45 min and a flexible head ratchet will make your life easier. If you look through these previous comments you will see a photo where they instruct you to grind certain areas off the manifold due to interference. I allready had a grinder and 3 minutes of grinding later my new manifold looked like my old manifold as far as original shape goes, there is a slight difference, easy modification. The install went perfectly, everything lined up, everything fit. Do yourself a favor and buy the Oxygen Sensor because after 110,000 miles my sensor was damaged where it entered the exhaust stream. I seriously hope this exhaust manifold has been improved upon by Dorman. It might make your life easier when you loosely install the new manifold to make sure the exhaust flange on converter (3 studs) lines up with new manifold, mine remained attached to converter, to prevent you from having to go under car and muscle them into position later. Good luck. So far so good......
Edward Lotak
2025-05-18 16:04:32
Packaged well, comes with exhaust flange nuts and heat shield screw, manifold to cyl head and flange gasket. I read a lot of reviews that the replacement manifolds cracked after only a short time so I broke the manifold in gently, By that I mean, after installation I verified everything was right, and started the engine for about 1 minute and then shut down. I let it cool until it was cool to the touch, about 30 mins. I did this a few more times progressively going longer, and then went around the neighborhood gently driving it and came back and let it cool. Then it was ready for my wife to race, I mean drive it. Worked great. So far it's been a few months and no issue yet. The only problem I had was the crush gasket that goes on the outlet flange was damaged. It looked like the box had been dropped in shipping and the weight of the manifold dented the crush gasket. Luckily I saw that before I was ready to install and I had one on order for when I was ready. I'm sure they would have replaced it but I though for the few bucks it would be quicker to re-order vs do a warranty ticket. Still way cheaper than the local parts stores. So check all the contents before you are ready to install so you can either ask them to send you another or buy it.
roldan
2025-04-18 15:31:31
Replace my broken exhaust manifold on my 2010 chevrolet equinox with this product. Ang i got no problem installing it.
Shadi
2025-03-23 12:17:14
ممتاز وسعر وجوده ونÙس الموديل لسيارتي اشكر جدا
Susan
2025-03-17 18:39:13
This is better than the original fits no problems. But make sure you have right tools to start
Garth Stuart
2025-03-14 18:15:46
Fit perfectly. Seemed good quality. Came with everything except the nuts to mount it to the head. But a person should have the old ones to use.
Brian
2025-01-19 14:50:11
Top quality replacement part that came with everything needed from gaskets to hardware.Arrived early and works as expected.
Recommended Products
![A-Premium Right Exhaust Manifold Kit W/Gasket & Bolts & Nuts & Washers [6,8Cyl 7.3 8.7L] Compatible with Ford F-450 F-550 Super Duty & IC Corporation & International Harvester](images/loading.gif)
$27.17
$ 12 .99 $12.99