Your cart is empty.
Your cart is empty.Any repair on the oil cooler or filter housing should include replacing the seals. This complete engine oil cooler seal kit includes all the seals and gaskets required to repair or reinstall the oil cooler or filter housing. This part is compatible with the following vehicles. Before purchasing, enter your vehicle trim in the garage tool to confirm fitment. [Buick Encore: 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021] - [Chevrolet Cruze: 2011, 2012, 2013, 2014, 2015, 2016] - [Chevrolet Sonic: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2020] - [Chevrolet Trax: 2013, 2014, 2015, 2016, 2017, 2020, 2021].
Noe Baltazar
2025-08-04 11:40:26
El producto es muy bueno quedó muy bien en mi Chevy Cruze 2015 1.4ðŸ‘ðŸ»
Saul Rivera
2025-06-16 10:29:34
All the gaskets fit perfectly, the ones I replaced were brittle and worn out. It's been about a month and no more leaks from the oil cooler. I would recommend to anyone with a leaky oil cooler. I would also recommend replacing the oil pipe feeder from the turbo to the block while you have everything apart.
Cerick
2025-06-04 11:10:35
The kit was a savior, it had seals in it that I didn't even know I needed. Some of the items are slightly wanting when compared to OEM, but they did the job well at a good price.
Kevin Limparis
2025-04-15 11:53:17
Got it from Amazon warehouse for like $20. Was like new. Used all the gaskets when I bought a cheap oil cooler and wanted good gaskets inside. Plus you need this to replace all the gaskets when you're in there doing the cooler. So you don't find out one started leaking when you put everything back together.
curt cassick
2025-03-30 12:41:36
Everything ya need just with it would tell you what the difference between the green and black o rings are? Took a guess hopefully it works out but the job to install this is a pain in the a**
Antonio Fuentes
2025-03-09 09:28:24
Usandoloo en mi Sonic 2013 turbo . TenÃa fuga de aceite. Quedó como nuevo
Brittany
2025-03-07 20:05:36
It’s been over a month since we installed and it is working well.
FarmerMark
2025-01-19 12:29:10
Kit was purchased to have all gaskets and seals necessary to repair oil cooler, which also requires removal of turbocharger/exhaust manifold assembly. Would need to make additional purchases for a couple of wrong items in kit.O-ring for oil cooler to engine block too small. Had to pull one from my own o-ring collection.Gasket for turbo section drain not a match-clips too wide, seal opening not round, and no double sided embossment on each side of the metal gasket, which is necessary to seal. Reused the old one OK.Extra o-rings included with no apparent purpose.The round steel gaskets came 2 with green and 2 with black resilient seals. No instructions for correct placement - either for the turbo water coolant line or the high temp oil turbo supply line? I guessed green for oil line.The exhaust gasket was a good replacement matching the OEM 3-layered steel.The good news is the gaskets and orings are holding after a couple of weeks use.
Customer
2025-01-10 14:49:30
Solved an oil leak in a 2012 Cruze oil cooler!
Israel H.
2024-11-13 13:27:36
no tengo fotos pero quedo prefecto en un cruze 1.4 turbo 2014, le cambie los sellos del enfriador con este kit, me pareció excelente la calidad, hice el trabajo hace 2 meses y aun no tengo quejas pero se que cumple la calidad, es un kit muy completo, solo le faltarÃa la junta para el múltiples de escape pero de ahà en más todo bien, es un trabajo sencillo por hacer pero muy laborioso.
Recommended Products
$26.88
$ 11 .99 $11.99