Your cart is empty.
Your cart is empty.Product Description
It's important to keep your engine oil cool for the engine performance and longevity! This engine oil cooler is specially designed to reduce the oil pressure drop caused with most engine oil coolers located in the radiator.
Two 1/8" NPT ports for sensors or turbo oil supply line!!!
This oil cooler adapter is designed to be used with an external oil cooler.
Ryan F
2025-08-21 12:53:42
I gave it to my buddy to put on his G8, seems made well. but did not work with my Trailblazer SS.-front U joint is in the way-will not sit flush against the block
Kindle Customer
2025-07-08 12:00:07
Leaks where the fitting seats into the housing even when properly installed. Buy higher quality that this one.
Zech
2025-07-07 15:09:33
Bought this on a whim because I didn’t want to spend $140 on the earls adapter. Installed nicely with no leaks had to use some pipe tape just for extra insurance.
Jase D.
2025-05-24 13:49:22
It leaks oil daily even with the engine not on. I'd recommend getting a different gasket and using some sealant on the threads
Jim Rogers
2025-04-12 14:51:47
Lots of issues with leaking. I personally would not purchase again.
Carl Beavers
2025-04-04 17:09:28
Used this to install an oil cooler and a 3 quart oil accumulator to my LS1 swapped 260z. No issues and works as intended.
GK
2025-04-03 11:36:56
Leaks from fittings, wasted so much time and oil
Katie
2025-01-07 13:18:06
Caused it to leak like crazy. Didn’t leak before
Layne
2025-01-05 18:55:39
As others have stated in their reviews, make certain to thoroughly clean out the adapter, and seal up the smaller plugs with an oil resistant gasket maker. I had some smaller fillings inside the item which came out easily with a pipe cleaner/compressed air, and the small plugs (where the sensors can go) will leak if you do not seal them with some gasket maker. ALSO be aware that you will need to delete the stock block heater if it is installed above your oil filter. The lines and fittings needed to install this will not fit around the block heater.
Recommended Products