Your cart is empty.
Your cart is empty.This direct replacement ABS wheel speed sensor matches the fit and function of an original equipment sensor. Made of quality materials with factory-style electrical connectors, this sensor has been designed and tested to be durable and reliable.
Brian Allen
2025-08-26 16:26:04
Perfect fit for my 2000 F150. It didn’t fix my ABS light on the dash, but I believe it’s one of the front wheel sensors. Either way, this was an easy and inexpensive replacement with a good product.
M. Tryon
2025-08-05 18:23:30
This is a great value and worked! It cured the ABS warning light on my 1999 4X4 Ford Ranger XLT (4.0L V6).Warning! I installed it without jacking up the truck. They are not kidding in the YouTube videos when they say you must be VERY careful not to break the plastic retaining clips. Try using your fingers to release the clips. If you use a small screwdriver you are likely to break them. Even knowing this I inadvertently broke one side. So now I only have one clip holding it in its socket. However, it was hard to purposely pull the connector out so I have confidence no road vibration will ever move it. For laughs? Call the Ford dealer and get an estimate on this job. $$$! Good luck!
Danny
2025-08-03 16:40:23
ABS light went off in the speedometer started working again thank you
Bean Dip
2025-07-09 18:52:30
As described.....High-quality
Customer
2025-06-17 15:26:40
Took all of 10 minutes and that includes wriggling my portly frame under the truck. It was a direct replacement for the rear ABS sensor on my 98 F150 with rear only ABS. Swap out couldn't have been easier; 10mm socket and ratchet and a flat blade screw driver to help pry the old sensor out is all you'll need and I left the truck flat on the ground. Main mission was the ABS light on the dash - it's gone!
Jonathan
2025-05-06 15:29:22
Comes with the oring, fits easily and gets rid of the pesky abs light.
Stroker 2
2025-04-26 10:52:35
Fit is good well made plug .
ben byrd
2025-04-02 10:29:11
Wrong electrical connection and points in the wrong direction.
Alejandro Colin
2025-02-21 13:27:32
Buen producto y de calidad, fue compatible con mi ranger 2006 motor 2.3 argentina
JW
2025-02-19 16:41:05
Used on 1997 f350 and worked perfectly,
Noam
2025-02-12 17:56:19
Amazing product a bit different than the original but still fit and better ! Had an issue with the speedometer needle going crazy after 60 km/h + needle wouldn’t work between 0-30 km/h + ABS light on the dash was onReplaced it in 5 minutes without jacking the truck (Ford E350 1992)Problem was fixed instantly !Be careful with the plastic ears from the connector they are easy to breakRemove the old sensor before disconnecting the harness it’s easier this way
Teri B.
2024-12-11 12:24:15
The item was as described, price was excellent. Took time to clean area around the old one and gradually loosened the old one so as not to break it. Added dielectric grease to the new one and installation was simple and quick. Was able to work under the truck without lifting it. The ABS light is still on and may require clearing or perhaps it is another sensor that is the issue although the other two were replaced not long ago.
BRAD LANGFORD
2024-11-20 16:48:35
Easy install, fit as advertised, time will tell how long it lasts.
Recommended Products
