Your cart is empty.
Your cart is empty.Product Description
10" Stroke For Drafting Chair,Bar Stool,Counter Height Stools
Is your gas rod safe?
Why do we have to choose Mcdoofly Class 3 gas lift cylinder?Because they pass the US BIFMA X5.1 test and the European German machinery DIN4550class-3(referred to as grade 3 gas rod) test. The required safety factors include the hardness thickness of alloy steel, pure nitrogen explosion-proof gas rod with 2.0 thickness of inner pipe wall, pressure value and pressure category, explosion-proof index and other 48 tests. We hope you understand the importance of gas rod on a chair.
- It is very important to choose a gas rod with excellent quality and passing the safety tests.
- Mcdoofly Hydraulic lifting cylinder has a Long-term service life.
Mcdoofly Drafting Stool Bar Stool Gas Lift Cylinder Replacement
Size:18”- 28” Long
The gas rod we use rises and falls every day,travel left and right from time to time. Can the quality be excellent-Yes! For a lifting multifunctional chair, the important functional part is the gas rod part, and the important safety factor is also the quality of the gas rod. We understand your concern.
- Outer Steel: 2 inches (5.0cm)
- Inner steel:1.1 inche (2.8cm)
- Replacement Pneumatic shock is applicable for 2 inches (50mm) diameter center hole base
Applications:
For Counter Height Stool
For Work and Shop Stool
For Bar Stools
For Drafting Chair
ma. charito de leon
2025-05-25 13:22:58
Finally, just 5 days ordered 19 and delivered 24 here in PH. Complete items and all working fits perfectly my bar chair. I'm supper happy.
Sig
2025-02-21 14:50:48
I was rebuilding my draftsman chair and decided to go with this hydraulic lift. I have taller than normal benches in my shop so this worked out perfectly for my application. It fits perfectly in the new base and works great with the extended throw. Very pleased.
Carla
2025-02-16 18:57:44
This will not work with a Steelcase Leap v1 because the top activation part is too high, so it stays activated and always sinks or raises when sitting or standing. It can be adjusted and installed with the orange part removed, but then the seat is not adjustable without uninstalling it.
Roger Hoover
2025-02-06 13:01:11
It works. Have fun getting the old one out though ..
Bradley Harrington
2025-02-03 14:14:06
So far it keeps stool up, and lets it go down. Hope it lasts a long time..
David Lange
2024-12-04 16:05:55
The installation was not as daunting as I expected. Happy to have had a piece of pipe to put onto my pipe wrench . That helped a lot in removing the old cylinder . This new one has a very good looking chrome finish that replaced the old black one. Smooth motion in changing heights. Looking forward to years of good use.
Bret
2024-11-29 15:50:20
I recently bought a stand up desk for my office and I discovered that I really like sitting up "perched" above my work station more than sitting "behind" it.As such, I looked for a way to convert my existing office chair that I loved into a "drafting stool" height.This was just the thing!It's a standard size, so I was pleased that I was able to remove the chair (using a chair removal tool - sold separately) and then a rubber mallet to remove the old piston. After that, it was as simple as you could get to simply swap this one in in its place.If you're going to add to the height of your chair, keep two things in mind:1. You'll likely want to add a drafting stool ring for your feet to rest on. They're easy to find and aren't very expensive.2. You'll want to LOCK your chair's recline feature if it has one as the minute you lean back at this height, you'll be in for a fun ride on the way down. Drafting chairs, even super nice ones, always have the recline feature removed for safety. So if you're going to convert an existing chair to a tall one, you're going to want to lock that feature for good.Very happy with it overall. It's super strong and fit perfectly. Highly recommended!
Customer
2024-11-28 17:29:50
Didn't last little over a month
Recommended Products