Your cart is empty.
Your cart is empty.Dremel build tape is a thin, plastic sheet that can be placed on top of your Dremel build plate in order to protect the plate from scratching. The build tape surface is engineered to allow the filament to easily stick to the tape while printing, but also to allow for easy removal once your print is finished. Dremel build tape is meant to be used in place of blue painter’s tape or other similar products and has the added benefit of being a single sheet, so it’s quick to apply and remove. The plastic material is significantly more durable than blue tape, so it will not rip or tear when removing your built part.
Am Custom3r 388
2025-09-03 17:33:03
Excellent build surface. Yes! This stuff sticks! You will have a hard time removing the final work. What I do is take my build plate off & put it in the freezer for 5 min. Then take my scraper and they pop right off.I get how for a few of these reviews people don’t like how much it holds. But that’s what your buying it for. Saved many builds for me.
Elijah Myers
2025-08-22 16:04:32
The were very easy to install, the worked amazing, and 3 mats for an amazing price!!!
Das
2025-08-19 15:37:44
Ok before I continue, please note my review is for PLA filament only, and this trick applies to all printers that can fit these sheets (i.e. Flashforge Dreamer, Qidi, etc.), not just the Dremel Idea Builder. Most of you are aware that PLA has a hard time sticking on bare 3D print beds; be it may aluminum, acrylic, glass, etc. What happens is that somewhere along the printing process, the objects either warp or slide off completely, causing a failed or ugly result. Many solutions surfaced over time to attempt at solving this, including using 3M painters tape / sheets, heated beds, slurries, glues, etc., and of course these Dremel Build Sheets.Now by themselves, these sheets are just OK. A brand new sheet sticks well like 3M painter's tape, but unlike the 3M tape, these sheets last for about 20 to 30 large prints instead of 1 or 2 prints with the 3M tape. After that, the prints start warping or sliding off, and it's time to change the sheet. Right now you might be wondering, "how on earth is this worth $30?" I'll get there, please read on...So the trick is that before each print, you must level your print bed, and then rub 2-3 thin coats of Elmer's School Glue Stick on the surface of the Dremel Build Sheet (until it's pale white). Now I don't know what the chemistry is behind this, but something amazing happens... Not only do the prints stick 100% to the surface with perfectly straight non-warped results, but you can do this again and again and again using the same sheet! I printed out big 5x5" objects with the Dremel Idea Builder printer OVER 200 TIMES using the SAME SHEET! All you have to do is wash off the glue after every print, and repeat the process. Not even my heated bed Robo3D printer gave me this kind of performance; not even close! Note, you'll need to use some kind of thin spatula, or whack your object on a hard surface, because these babies will stick like a weld if you use this trick!So TL;DR - The trick is before every print, level your bed and then apply 2-3 coats of Elmer's School Glue Stick on the Dremel Build Sheet; Wash off the glue after each print; repeat; Will last for 100s of prints.
Ana Alicia Fuentes RodrÃguez
2025-08-12 10:12:37
Great quality
M. Rosen
2025-08-05 14:12:38
What a waste of money!Even when this is brand new and right out of the container with the first print - nothing sticks. Models slide right off like a hydroplane.I have read the other review about applying elders' glue, but frankly, when I spend this kind of money I don't want to be bothered with modifying to get it to work as advertised, nor do I want that mess and hassle. And I certainly wouldn't expect to have to do a 'workaround' like this when a product is brand new - maybe to coax more life out of an older sheet, but a brand new one? Forget it!I have ended up using the 3D Printer Build Platform Tape for Dremel Idea Builder, 180' () and it works great. I can use it for many builds before needing to replace it, and I often can simply patch a small area that may have ripped in removing a model, without having to replace the whole build platform area. The Dremel build sheet shown here is solid and does not allow this kind of flexibility.
vv
2025-07-06 15:47:07
We are new at doing3D printing. We love the Dremel printer and have found these sheets to make things go even more smoothly. When we tried just using the blue tape on the print platform, we had more problems with the object not "sticking" to the platform and "going to shreds".The Dremel Build Sheet have definitely reduced waste of material (because the object being printed seems to hold better to the sheet than to tape suggestion in the operations instructions .and your print does goes to shreds. Also, it makes it easier to get finished piece off the platform when they don't just pop off easily. I don't know that we got 100 builds on a sheet before having to change but we did have at least over 50.
ghostgirl
2025-07-01 13:40:03
I've already scraped the heck out of my initial build sheet, learning how to get prints off effectively with my 3D20, so I figured I should order some replacements. Fantastic (maybe too good) adhesion, looks nice, extremely easy to apply and remove. I'd get them again.
Kevin Keaton
2025-05-19 20:30:49
I've purchased a lot of these, and you get maybe 5 good prints most of the time. The prints stick so well it ends up ripping the material off. For the price, its not worth it.
pamela
2025-03-27 14:21:37
Just like the factory
Cliente de
2025-03-19 11:45:12
Es un elemento esencial de la impresora, facilita las cosas al momento de retirar una figura de la impresora, es importante cambiarla cuando notes que tus impresiones ya no se quedan adheridas y se empiezan a caer a media impresión. Asà con una lamina nueva también ahoras material.
Robert P.
2025-02-15 12:21:32
If you have a Dremel 3D printer, you will appreciate having a spare build sheet or two. We use Scotch blue tape on top of the build plate for adhesion while printing, but even so, the build sheets take a beating. Here in Canada, parts and accessories can be rather hard to find. Amazon.ca offers a pack of 3 plates for our Dremel 3D 20 printer. The other nice thing is that they come with a bed levelling sheet as well.
mTh
2024-12-24 17:42:50
Funcionando correctamente
Customer
2024-12-16 09:23:59
arrived on time and are as advertised, works great
Recommended Products
