Your cart is empty.
Your cart is empty.Product Description
Packge Include
- 1 x drywall sander with vacuum attachment (26ft power cord)
- 12x sanding discs(A80/100/120/150/180/240)
- 1 x set of safety kit(1 x goggle 1 x earplugs, 1 x mask )
- 1 x carrying bag
- 1 x hook-and-loop fastener
- 1 x dust collection bag
- 3 x vacuum hose connectors
- 1 x dust extracting hose
- 1x hex wrench
- 2 x carbon brushes
Gioventù Drywall Sander with Vacuum
Quickly&Efficiently
- Unique Patented Ball-Joint Design - 0-Resistence Easy Automatic Leveling
- 95% Efficient Dust Absorption - ensuring a safe and clean working environment
- Powerful 6.5-amp Brass Motor - sanding the surfaces quickly and efficiently
- Power Cable: 26ft
- Dust Hose: 10ft
- Weight: 11.7 lbs
- Sandpaper Diameter: 8-2/5”
- Paper Fitment: Hook & Loop
- Variable Speed: 900-1800 RPM
- Extendable Handle: 4.9ft-6.2ft
- Voltage: 120V，60Hz
360-degree Swiveling Base
The base can swivel 360 degrees to easily fit any corner, edge or wall thereby ensuring that the entire wall is smoothened out evenly.
Detachable Chassis Edge
There’s a detachable sanding disk you can move quickly, getting access to tight corners & perpendicular walls.
7-speed Control System
The device has 7 variable speed options that you can adjust between 900 and 1800 RPM to optimize efficiency.
TROUBLESHOOTING
PROBLEM:
- Motor is not working
Cause: 1) Wires in the main plug or in the socket are loose. 2) The switch is faulty.
Solution: 1) Have the socket and plug checked by an authorized technician. 2) Have the switch replaced by an authorized technician.
- Unusual noises occur during operation/Motor is not working properly.
Cause: 1) Switch contact has failed. 2) Components have jammed. 3) Too high of load has been applied.
Solution: 1) Have the switch replaced by an authorized technician. 2) Have the tool checked and repaired. 3) Using less pressure during sanding operations.
- Motor gets hot
Cause: 1) Foreign substances have gotten inside the motor. 2) Too high of load has been applied.
Solution: 1) Have the foreign substances removed. 2) Have the switch replaced by an authorized technician.
- Frequent sparks occur on the commutator
Cause: 1) There is a short circuit in the motor(armature) 2) Carbon brushes are worn out or jammed.
Solution: 1) Have the armature replaced. 2) Have the carbon brushes checked.
Customer
2025-08-28 09:03:52
Makes big jobs feel small. The attachments between bag and tube's are flimsy though.
shawn v.
2025-08-13 13:06:00
Great sander used it on several jobs holding up nicely, great visibility.
Miles T. Zimmerman
2025-07-05 12:10:57
I purchase this sander based off reviews. I truly thought it was a going to be a good quality tool at a low price. Please don't waste your time and money. Here are the issues.1. Its heavy, it took a while to figure out the best way to operate it due to its weight. After sanding 1/2 of a basement, may arm was just about dead.2. Suction was horrible. The bag did collect some but most just landed on the floor. For the critics out there, yes it was assembled correctly, all the seals in place and I checked for leaks, which there were none. It simply lacks the power to suck all the debris. In my case, drywall dust.3. Quality: the trigger is faulty, you had to put pressure more on the back side of the trigger to keep the unit working. If I barely release pressure or adjust may hand to change positions, the sander would turn off and on until I squeezed it harder and just on that right spot.4: Quality: While using the proper sanding discs, and only after sanding about 40 LFT of drywall, the sanding pad ripped. The pad is thick in the middle but tappers to a point towards the edge. That edge is too thin. To keep using this unit, you would need to replace the pad too often to be worth it. Poor Design5. The motor is the only Positive item. It operated very well and the adjustable speed really helped control how much you wanted to sand and how fast.I returned the item for a refund.Conclusion: Don't buy. Put your money towards a better product.
Steve L
2025-06-23 16:35:53
This tool saves a ton of time when sanding the drywall mud between coats.Pros:Saves timeResults are goodBuilt-in vacuum helps to reduce dustCons:Must be plugged in (not battery powered) so you need to be aware of the cordDust collection bag does not detach easilyUnit is somewhat heavy making large jobs tiresomeMotor is a bit loud and "screechy"The heavy lifting needed for the ceiling in the picture was nothing compared to having to do this by hand. Really appreciated how quickly I was able to get the sanding done.
John
2025-05-11 17:16:43
The media could not be loaded.
kristy crabtree
2025-05-01 14:16:53
Had to sand some ceiling shiplap. Way heavier than I expected, had to take many breaks and had my son help me. Other than weight, easy to assemble and sands great.
ab
2025-02-18 12:51:21
IDK why they made it this big. I'm a big guy (250lb, 6ft) and this thing is big and heavy even for me. If it was made to be detachable in some way and was about 50% smaller it would be more useful. It's only useful for tall ceilings in big open rooms. It is clunky of useless useless in smaller locations and walls. Its very difficult to maneuver.
One Bossy
2025-02-13 17:31:45
The brushes makes swirls and make the job worst, otherwise it operates perfect.
Ana Cabrera
2025-01-19 14:08:19
Estoy satisfecho con mi compra, el producto cumple con mis expectativas. El tiempo de entrega de mi pedido fue el que me dijeron. Muchas gracias!
Recommended Products