Shopping Cart

Your cart is empty.

Your cart is empty.

Eaton 2600H11E High Inrush Rocker Switch, DPST Contacts

Free shipping on orders over $29.99

$6.95

$ 3 .99 $3.99

In Stock

About this item

  • 22 amp, 125 VAC/16 amp, 250 VAC high inrush snap-in rocker switch for a variety of applications
  • Double-pole, single-throw switch for controlling two circuits at one time
  • Plastic construction with glossy black base, bezel, and rocker
  • Withstands inrush currents up to 100 amp for 10 ms
  • RoHS compliant, UL Listed, and CSA and VDE approved


This Eaton 2600H11E high inrush rocker switch is rated for 22 amps at 125 VAC and 16 amps at 250 VAC, and can withstand inrush currents up to 100 amps for 10 ms. It is a double-pole, single-throw (DPST) switch with a glossy black base, bezel, and rocker. It has three positions: on, none, and off. This switch is Restriction of Hazardous Substances (RoHS) compliant, Underwriters Laboratories (UL) Listed, and Canadian Standards Association (CSA) certified and Verband der Elektrotechnik (VDE) approved. This high inrush rocker switch is suitable for use in appliances, electronic instrumentation, data processing, communications, medical equipment, office equipment, and other applications.

SpecificationsSwitch typeNon-illuminated rockerContactsDPSTPositionsOn-none-offSwitching actionMaintainedPower rating22 amp at 125 VAC, 16 amp at 250 VACInrush rating100 amp for 10 msContact materialSilver inlay over copperContact resistance10 megohm maximum at 1 amp, 4 VDCMechanical life50,000 cycles minimumDielectric withstanding voltage1,000 VAC root mean square (RMS) minimumTerminal type6.3 mm tab/0.25" quick connectTerminal materialCopperOperating temperature range32 to 185 degrees F (0 to 85 degrees C)Dimensions*1.197 x 1.027 inches/30.4 x 26.1 mm (L x W)Standards metRoHS compliant, UL Listed, CSA certified, and VDE approved

*L is length, the horizontal distance from front to back; W is width, the horizontal distance from left to right.

Eaton manufactures electrical, hydraulic, and mechanical power equipment, including the Moeller brand, and was founded in 1911 and is headquartered in Dublin, Ireland.


woodcutter457
2025-08-02 11:16:53
This is the second switch I have ordered. The first one I used to repair a space heater. The second switch I used to repair a treadmill. These switches are well built and much better than the factory switches that both shorted out and completely melted.
Radek
2024-12-15 19:27:13
It is just a switch so what one can write about it? It seems solid and was not too expensive. I hope it is a good buy and will last. Shipping was fast, package proper. Nothing to love, but I have no negative things to say.