Your cart is empty.
Your cart is empty.Product Description
James sutton
2025-08-01 11:01:48
Screwed right in after finding the correct adapters. Worked well held up to the brake fluid.
Felix A Droz
2025-07-19 11:37:51
Value
Doug Watson
2025-06-17 14:39:37
The outlet hose adapter are very prone to cross-threading. You will need very good lighting to observe if this is starting to happen, One of my fittings did x-thread and all I could do was to keep tightening it to stop the fitting from sucking air back into the cylinder. This adapter will not be useable again. Better off finding a metal adapter.
Hand sweat
2025-06-05 16:38:00
Really good bleeder kit
David
2025-06-01 13:59:08
They worked once but they were ill fitting so I had to force them a bit. I don’t think they will last long, however they were cheap enough to consider the kit a disposable item.
Digger
2025-04-23 19:29:30
Got this to bench prime a brake job. The threads on these are plastic and did work and seal up well. The line that comes is soft and flexible. That helps keep them rounded up and back into the reservoir. Snugged up with a wrench. Did not go in as far as I originally figured but ended up just fine. Had to end up using both clips to hold the lines into the tank. In all it worked just fine and should last a few uses.
tlbshere
2025-04-10 10:27:45
I had an issue with spongy brakes for a long time I used this to bleed master cylinder now brakes are perfect didnt usee Teflon tape either
Rick & Lara
2025-01-15 12:15:07
Finally got around to using this kit. I opened it up only to find that 1/2 of the blue metric adapters including the 1 of the 2 I specifically needed were missing from the kit. And the box was taped shut and not damaged so must have been overlooked when packaging it. Completely worthless for me. Very frustrating.
Recommended Products