Your cart is empty.
Your cart is empty.Product Description
SMOTIVEPRO 12-Piece Master Cylinder Adapter Kit Compatible with Most Master Cylinder Reservoirs.
See the product manual and below for more details
Grp Cpt Mandrake
2025-08-28 13:28:49
Better quality than expected for the low cost option in this category. Fits Toyota/Lexus 43mm brake reservoir perfect and seals properly.Coupled this with Schwaben Pressure bleeder to bleed brakes on our 2 Lexus and held pressure 15 PSI+ no problem. Easy brake bleed, no leaks. Quick disconnect from Schwaben bleeder fits and seals.Having the "right tool for the job" is always helpful. Product pays for itself in one use.Specialized tools like this make auto maintenance much easier and less time consuming.
Mr. Sanders
2025-07-25 18:02:32
To me it was easy to use, quickly snapped on the hose and fit the brake master cylinder perfectly. No leaks and held the pressure at 15 psi. I used it on a Toyota Avalon.
Havik
2025-07-10 13:45:41
Works fine for most caps. Have had some issues with Honda cap. It does like to engage fully and has popped off under pressure a few times. I have not use all caps yet but most. I would recommend they redesign the Honda cap.Still I am happy overall. Makes bleeding brakes a breeze with pump kit I ordered with this set.
L. Thomas
2025-06-27 12:39:16
I bought this paired with my pressure bleeder by Smotivepro. I was do a complete flush. The cap fit perfectly, so I started with an air pressure test by using an empty pressure bleeder and pumped up to 15psi. Please be certain that all caps are snug. I initially had a slight air leak, but it wasn’t from this cap. It was from my bleeder’s fill cap. After snugging down the cap, I had no pressure loss for 15 minutes. The brake flush went as planned with absolutely zero air or brake fluid leaks. I would definitely recommend this cap.
Joe
2025-06-01 15:13:50
In the last few years, I've orded several speciality tools such as this brake bleeder adapter kit. More than half of the molded cases can not get effectively hold the tools provided. There are many small pieces in this kit and its a pain to open the case and spend the next 5, or so minutes putting the pieces a back in the case. Might as well have just put the pieces in a box, forego the molded case, and pass the savings onto the consumer. Will follow up with an update the effectiveness of the adapters after I use them.Update: Performed brake pad and rotor replacement on a 05 Jeep Liberty, 02 Buick Century, and a 1992 Chevy c2500 pickup. All adaplers used leaked, especially the large rectangular adapter for the C2500. All together lost about a gallon of brake fluid. It should be noted, you may have some success if you keep the pump pressure low, under 20lbs. Some user tips and instructions may help but, still not worth the loss of fluid, mess, and clean up. Good luck!
Dominic
2025-05-22 12:40:29
Works perfectly easy to use saves time I’ve done 4 cars in less than 3 hours. Great quality in materials use
Jim 20005
2025-05-17 20:31:29
This adapter fits a 2005 Toyota Tacoma (4.0 L V6 4x4) very well and makes bleeding brakes very easy.
Ss
2025-04-26 18:08:19
very well built, all metal construction but the hose fitting is not a normal barb size so i had to get a hose that was slightly bigger and clamp it down tight, still leaked but very little. the fitting itself doesn't have a standard NPT so it can't easily be changed out either.
Frank Clarke
2025-04-19 17:41:21
Pre-lube inside the cap so that it fits easily inside the neck of brake fluid reservoir worked with no leaks and the easy ‘quick-connect’ coupler.
Jimmy G
2025-03-25 16:41:54
Works great! If I have to nitpick a bit though, having a ball valve attached to reduce spills would be nice; I just added my own.
moi
2025-01-12 18:33:56
L'outil est top pour purger les freins et embrayage Toyota
Elke Pramann
2024-12-04 12:13:26
Für Bremsflüssigkeitswechsel beim alten Toyota Yaris Verso angeschafft - funktioniert einwandfrei!
Recommended Products