Your cart is empty.
Your cart is empty.Product Description
Ignite Performance, Save Fue
Fuel Injection Cleaner Canister -
Elevate Your Engine Care to Pro Level
-
Rotatable Hook
No need to hold the bottle during the process
-
Liquid-filled Gauge
Accurate vacuum reading and monitoring of chemical flow
-
Vacuum Hose
No need to disassemble the intake air boot, manifold and other difficult steps
-
Quick Connector
Easy to push-on / disconnect the hose
Instruction
Reagent Filling
Pour the cleaning reagent into the canister, fasten the blue cap and connect the quick coupling.
Detach and Insert
Remove the rubber vacuum hose from the vehicle vacuum system.
Insert the cone tip of the vacuum hose into the vacuum hose.
Ignite Engine
Start the engine, the vacuum meter will indicate -50 cmHg range.
Activate Flow Valve
Turn on the flow valve to allow the reagent into the vacuum system and wait for 7-10 minutes to complete cleaning.
Jermaine
2025-08-28 21:51:33
This item worked out for me and my 2008 Infiniti G37s , once the cleaning fluid was filled and the plastic tip was inserted into one of the vacuum lines, the valve on the canister opened with engine running (of course) it looked kinda cool flowing into intake manifold. And It was set it and forget at that point. Once the fluid ran out shut the engine off and let it heat soak for about an hour then with the vacuum hose re installed I drove the car until the smoke cleared and it's been running much better than before. It's a cheap product for it's purpose but I don't do auto repair so it works fine for my level.
Luis A. Barrera
2025-08-26 14:21:23
Works as intended. A little difficult to adjust the rate at which the cleaner gets sucked in because there is no “window†showing the drops, and it’s of a challenge to determine the rate while the fluid is moving through the tubing
Sergio Sanchez
2025-08-25 18:44:35
Works as designed. Used it to clean intake systems on all my vehicles. Used SeaFoam cleaner and it works great.
chay
2025-06-20 12:40:23
Very good no more to say
Kindle Customer
2025-02-06 12:01:45
Used it . works as described . was easy to use however with no ability to adjust flow rate to much can go in the system resulting in a engine code which i received after the engine shut off. after running engine for a while i erased the engine code and it has not returned of yet . Hopefully it will not return but i would recommend running the engine after it shuts down until all smoke has been removed.
Michael Matienzo
2025-02-04 16:31:12
The media could not be loaded.
Alberto
2024-12-25 18:07:46
Hose is not made of great material, it has swollen to the point where the barbs can no longer grab it. I have cleaned it every time I have had to use it but that did not seem to help, other than the hose being a major letdown this product was great for the first 1-3 uses. For professionals find another tool
Aaron F.
2024-12-15 16:47:19
Item works as expected, the outer tube has fit most vacuum ports you would access for an engine, the inner feed tube does not have a tight fit and you need to set it into the bottle carefully to get everything to work correctly.
Recommended Products
$17.00
$ 6 .99 $6.99