Your cart is empty.
Your cart is empty.Exhaust Extension Hose Kit for Hobby Airbrush Spray Booth - Hose Extends up to 5.6 Feet (67 Inches) (Spray Booth Not Included). The Exhaust Extension Hose easily Connects to the backside of Hobby Airbrush Spray Booths. Hose Draws Particles and Vapors through the hose up to 5.6' (67 Inches) away from your Work Environment! Place the 1" High x 9.5" Wide Exhaust Hose Outlet between a Small Window or Door Gap. Keeps your work environment safer by reducing fumes, particles and hazards when spraying in confined areas. Installation of the Extension Hose is Easy! It attaches to the backside fan exhaust port of the booth. Simply remove the four screws that hold the fan protection cover on, then reattach the fan cover by putting the screws through the base piece of the extension hose and the fan protection cover (optional) and screw it back into place. Push the flexible hose exhaust sleeve onto the base and tighten the hose clamp to keep it in place. Now push fit the rest of the hose and outlet together. Extend hose and put exhaust outlet out of your working environment. Booths the Exhaust Hose Fits: Master Airbrush Spray Booth Models B400DC & B420DC, Paasche Booth Model HB-16-13, Other Brands that Use this Type of Exhaust Hose.
Cory Johnson
2025-09-01 21:45:56
I was afraid to buy this because people in the reviews saying it doesn't fit so I am here to help.This is Masters Airbrush product code ‎BH405 and it is designed to work with B400DC & B420DC spray booths. The product DOES NOT come as pictured, it is black, not grey. As others have pointed out, the instructions are NOT correct and must be for an older model. It does however fit my B400DC and using this brief guide along with pictures you should be able to attach in seconds1.) In the first picture, this is the part that is going to attach to the fan on the back of your spray booth. Please note the 4 hooks as this is key to getting it to fit.2.) In the second picture, this is the back fan of the B400DC spray booth. The arrows are pointing to where the hooks need to sit for installation (only two slots showing in picture but there are 4 total). So place your 4 hooks into the 4 slots on the back of your booth.3.) Picture 3, this is what the piece looks like when it is in the slot. All 4 of your hooks should look like this before the final step.4.) Twist you piece clockwise. This may be scary at first because they are tight and there are 4 of them you need to seat but press in a little and give a good twist and you will hear all 4 snap into place which you can see with the final picture.That's it. The rest is simply setting up the other parts of the hose and you are good to go. I can't speak on if it leaks air like some are saying but that is an easy fix with some insulation from a local hardware store placed just right before attaching the piece to the back of the booth.Hope this helps
ZionXX
2025-08-24 12:25:29
using this to vent my laser engraver out the window... not the intended use but works fantastic!
Primedmonkey
2025-08-11 15:41:03
I have a older collapsible spray booth and i had to make a few minor changes to the clips. I had to sand them down as they were to tall to hook onto the fan cage and then back the screws of the cage out a half turn each. After all of that it clicked in very positively and hold swell. The only issue I have is that the hose does not hold really well to the rubber adapter, any movement of the hose after it is in place risks pulling it out and having to put it back in place. Overall the construction is good and it works well, just a bit of DIY to get it to fit may be necessary.
Dan Klepac
2025-07-16 10:13:30
great help in booth ventilation
Thom T
2025-06-20 15:30:11
Having built my own spray booth many moons (years) ago, I needed a better way to exhaust the fumes outside without opening the windows all the way. My booth is built on an old microwave oven cart and has two electrical panel 4" exhaust fans. This kit is the answer I have been searching for without having to build onto the back.These attach perfectly to the fans. The fan adapters mount to the fans' mounting holes (6" diameters). The hoses screw into the fan adapters and can be removed when the booth is not being used. The flat exhaust pieces fit under a partially opened/closed window to allow year round use; maybe with the exception of heavy rain from that direction. The closed window holds them in place.
Troy M
2025-06-12 11:05:29
seems like it will do the job of venting my desktop paint booth. Now I have to get it installed.
randy
2025-04-11 21:07:13
It work good
Ron
2025-03-27 10:16:42
Parts listed on the instruction doesn't match with the one actually sent in the package.1.) Instruction said to screw the connecter on the paint booth, but there are no holes on the connector. It is exactly like what other review said. Wish I catch that comments before I made the purchase.2.) There are hooks on the connector, but they are too short and can never catch the pillars.So, the hose kit can be assembled neither ways. It is a faulty design. Not to mention the product doesn't even look like the photos on Amazon!DON'T BUY IT!
Keith Dunn
2025-03-09 21:56:30
The product is good but instructions could be a little more clear & pictures bigger.
John E.
2025-01-23 15:23:44
it would be nice if the hose could extend a few more feet, but it is severing its purpose right now. I will be making it longer for my use.
Glen Dahlberg
2025-01-14 14:52:57
no good
Maximcan
2025-01-11 12:45:13
I didnt hook up directly to my booth but it was an easy fix.
Recommended Products
