Your cart is empty.
Your cart is empty.From the Manufacturer
Festool FS Guide Rails are available in eight different lengths from 32 inches to 197 inches (800 - 5000 mm), providing the right length for straight, splinterfree cutting in just about any application. The integrated splinterguard is a critical guide rail system component, and after some time and heavy use, will need to be replaced. Replace your splinterguard as needed to ensure perfect alignment of your guide rail to the cut line, and to protect against tear out, on cuts both with the grain and across. Though you should expect many cuts from your original splinterguard, its life expectancy is heavily dependent on your application. Keep your cuts perfectly splinterfree by periodically replacing your splinterguard, especially if you are switching between blades, or using the guide rail with more than one saw. Clear splinterguard enhances visibility of cut line. Includes one 197in (5000mm) Clear Splinterguard.
Joshua Bicknell
2025-08-24 13:42:25
Plenty of length for 3 full tracks. Make sure you clean the old adhesive off your track and this is money. Festool does a great job with this.
Camden56
2025-08-01 18:29:17
Go to YouTube for better directions on how to install. Festool makes great products, but users have better ideas on how to install.
Scooter
2025-07-23 14:30:28
Have replaced many splinter guards on my Festool guide rails. Have tried the cheaper options but they never really adhered well even after a thorough cleaning with Acetone. A little pricey but well worth it.
Seth
2025-07-19 16:05:11
I read with trepidation other reviews that states that the guard peeled. With that in mind, I ordered expecting the worst, and was pleasantly rewarded. I installed the guard on two fences, making sure the absolutely prepare the receiving surface like I was going in for open heart surgery. I used lacquer thinner, as I didn't have naptha on hand (the solvent suggested in the kit).Several weeks of active use later, they're solidly attached and not moving around at all.I don't leave my fences in a hot truck or in rough conditions. They're in a relatively cool shop, stored vertically on a nail, and I'm in a low humidity part of the West.I really like the clear compared to the OEM black.I'm also thrilled to get back the accuracy of the Festool TS55 with the new guards.Hope that helps in your choice of replacements.
Customer
2025-06-27 16:15:17
Great on the track
Joseph Crowe
2025-06-17 17:17:12
First off, I lived in Texas where my Festool guide rails suffered through the dread summer of 2011 in my garage (90 days over 100ËšF). This caused everything made of urethane to fail and these splinterguards to separate from the rails. I doubt there's any existing design that could survive those conditions. Now I live in TN and am using my Festool rails again. The replacement procedure was straightforward. I cleaned the old residue with acetone followed by denatured alcohol. I used a J roller to compress the adhesive to the rail once positioned. So far, so good. The package was good for both short and long rails and has enough left over for another replacement. Good stuff...
RGT
2025-06-09 12:08:22
Works like new
Customer
2025-05-29 16:45:27
This is something you should always keep on the shelve. Good stuff
LCCM
2025-05-27 16:40:40
Parfait
Customer
2025-04-09 18:16:58
Good festool quality as always. Easy to remove and stays stuck. Usually better value than sourcing from local stores (AUST)
Pierre
2025-01-31 12:18:57
Très bonne adhésion sur mon rail Dewalt. Le pare éclats transparent est vraiment un plus pour viser juste.
Bengt
2025-01-27 14:55:51
Product as advertised and quick delivery.Good experiences.
Rainer Hollender
2025-01-19 11:01:53
Mussten bei meine Schienen erneuert werden. Hat wunderbar geklappt. Und die Qualität ist halt Festool.
Recommended Products
$21.95
$ 10 .99 $10.99