Your cart is empty.
Your cart is empty.Product Description
Unlike many consumer-grade solutions on the market today, the FibroPool Professional Flexible Vaccum Head has been created using only high-quality materials. The traditionally stiff, PVC body and wheels have been upgraded to a thermoplastic urethane to ensure ease of maneuverability along all pool surfaces regardless of material or contour. Cheap, plastic ball bearings and handle are now made of a robust, non-corrosive metal. No corners have been cut to ensure this will be the last vacuum head you’ll ever buy.
Stainless Steel Ball Bearings
Stainless Steel Hardware
Urethane Wheels
K. Williamson
2025-09-02 16:04:13
Wow, a bit of a learning curve, but in the end note I love this pool Vacuum attachment.Word of wisdom.1. I though put the pole in the wrong hole (hold the jokes) and went to vacuum and it fell off and skirted down the pool to the deep end in in 3 seconds. 30 minutes later I fished it out. Then when I put it right, I put it back into the pool and my pole , one of them wasn't secure and boom, into the deep end again.But when I finally put it together quickly, it works like a champ. The many wheels make it float on the bottom easily. This is solid Metal and hard wheels , it is easy to maneuver around the bottom, great quality in my book.My Zodiak G3 failed me, it was good but never got into the dirty part of the deep end, this one does.I have a 10,000 gallon pool and in 5 minutes 90% of the big stuff was gone. I just went over the pool a few times to get every thing nice. I would say 10 minutes top to vacuum the whole pool. This does boil up some debris so I went back with my pool skimmer and picked all of that up.Overall 5 stars.I would compare this to our Rhumba Vacuum and my Zodiak G3 vs a broom and this pool head vacuum. Yes the G3 would get it 98% clean over the hours. The Rhumba the same thing, 2 hours later our house is vacuumed.I find it much easier to just take 10 minutes to vacuum the pool and I don't have all the 10' of hose and my G3 in the water, it is nice just to see the water !Either way, I highly recommend this Pool Cleaner.
TechHio
2025-08-29 10:56:28
The “FibroPool Professional Flexible Swimming Pool Vacuum Headâ€is pro quality, extremely well-made, and works very well. Metal parts are used where other manufacturers use plastic. It’s wider than most vacuum heads and stays on the bottom. Well worth a few bucks more. Great product!TIP: Always rinse pool tools with clear water after use. If you leave chlorinated pool water on your pool tools it with cause plastic parts to break down faster and need replaced sooner. This is especially true for pool brushes and skimmer netting.2024 Update: TIP - Once a year, tighten the Philips screw on each of the wheels on the FibroPool swimming pool vacuum head. One of my wheels came off after 2 years of daily summer use. The wheel is rust resistant, apparently stainless steel, and they’re easy to put back on if one comes off. You may have to use an offset screwdriver, as in the picture. Save yourself the trouble and just tighten them all.I used the pool vacuum to retrieve the wheel and nut and collected the parts out of the skimmer.This is a great pool vacuum head and is holding up well after 2+ years. I store it indoors in the winter. I still recommend the FibroPool vacuum head.
Elliott1282
2025-08-24 13:19:45
The media could not be loaded.
WMikeR
2025-08-18 14:31:48
I have always used one of the blue triangular vacuum heads with the brushes. I decided to try this and it works really well. The first thing I noticed is that it is much easier to use than the other kind. The small wheels on the bottom allow it to move across the pool bottom with little effort. It is weighted well also so it stays down. The only reason I am giving it 4 stars instead of 5 is that the ends are starting to bend upward a little so it can miss stuff on the edges sometimes. Overall a good product!
TP
2025-08-03 12:46:37
My pool is essentially in the woods, lots and lots of nature is put into my pool on a daily basis. My filter and Hayward simply can’t get the job done to have a crystal clear pool. I’ve learned to once a week run the pump off the skimmer only, let the crud settle to the bottom of the pool and use this very efficient attachment to vacuum the bottom of the pool through the waste setting so the water goes out of the pool. Works great, very easy to roll, heavy/sturdy feel, stays on the bottom and in 15 minutes or so my 13k gallon pool is clean as can be!
Wen L
2025-07-21 16:56:19
Removing the calcium flake deposits at the bottom of the tub was my reason for buying this vacuum head. It worked better than expected. The weight of the vacuum head and the rollers ensures it stays at the bottom and moves freely. The width is just right for the staircases so my pool is free of all small debris. Too bad it didn't remove the stain marks from the pool bottom :)
Amberly
2025-06-02 12:03:42
Ordered this for my above ground pool, it is very easy to use, easy to maneuver around the pool, gets the job done like I hoped. Well made, great design, also easy to store when not in use.
'cil
2025-05-20 14:52:08
A GAME-CHANGER FOR POOL MAINTANANCE! I M PLEASANTLY SURPRISED BY ITS PERFORMANCE, ESPECIALLY CONSIDERING THE PRICE COMPARE TO POOL ROBOTS. A LITTLE EFFORT BUT IT DID NOT GET ON THE WAY COZ IT REMOVES DIRT AND DEBRIS EFFECTIVELY [RECENT WILD FIRE IN PASADENA] I HAVE NOTICED A SIGNIFICANT IMPROVEMENT IN WATER CLARITY SINCE I STARTED USING IT.HIGHLY RECOMMENDED
Krish yadav
2025-02-15 18:47:25
It got minor cracks in 2-3 times of use
Wurlitzer
2025-02-07 10:36:50
Just received so this review is based purely on the apparent quality. This item seems well made, stays on the bottom on the pool and has enough flexibility to cover small variations the pool surface( fiber glass pool). Provides good suction, clearing base debris well with minimal number of repeat strokes. So, my initial reaction is this is a good product that does what you expect. Considering its durability, only time will tell. If any defects develop, I will be sure to update this review.
Andy Weir
2025-01-24 10:52:09
I had the triangle (blue) and it stuck to the bottom of the pool. When I took it out of the pool it was damaged so I couldn't finish vacuuming.I purchased this one and started where I left off and it worked great. Didn't get stuck at all. It was easy to use, especially due to the wheels. It is obviously wider that the old vacuum head that I had, so it seemed to clean a wider path. Thus making quick work for cleaning the pool.
Everett Chan
2025-01-02 11:11:48
This pool vacuum head is heavy and well built. There is no comparison as to how much better it is to use this head as opposed to the cheap plastic triangular one. The wheels are smooth and makes this easy to operate effortlessly. It picked up everything from worms to debris to even sand. No bristles to disturb the sediment so everything goes into the vacuum cleanly. Makes cleaning the pool more enjoyable if that is a thing. Should have bought this a long time ago. I will purchase another one when this one wears out. I have a 16x40 fiberglass pool.
Jason
2025-01-01 12:12:14
Very good pool vaccum makes the job easier the old triangle shapped head.
Recommended Products