Your cart is empty.
Your cart is empty.Product Description
Firecore SDS Plus Angled Bent Tile Chisel
FS18365
Firecore FS18365 tile chisel constructed from special hardening of the high-quality tempered steel, with additional surface protection of the chisel effectively minimize wear and reduce notch sensitivity. This processing allows longer service life and a higher material removal rate. The extra wide 3 inch blade removes more thinset per pass. This scaling chisel is the perfect choice for clearing tile, thinset and other stubborn adhesives.
- SDS Plus Tile Chisel is not intended for concrete, but works great for remove the concrete splatter
- Please double-check the specs and the size to see if the hammers connection or the slot can comfortably fit
Specification:
- Working Length: 165 mm (6.5")
- Width: 75 mm (3")
- Shank Type: SDS Plus
- Material: High-quality tempered steel
- Slightly angled working end
- Single bevel for maximum material removal
Compatible with All Standard Powerful Percussion Hammers and Drill Hammers
Firecore SDS Plus Shank works with all common SDS plus drills and impact hammers of Bosch, Hilti, AEG, Atlas Copco, DeWalt, DUSS, ELU, Hitachi, ITW split, Kango, Kress, Makita, Metabo, Milwaukee and other brands.
- SDS Plus shank, compatible with all standard SDS Plus rotary hammers
- SDS Plus looks similar to SDS-MAX but is much smaller
- SDS Plus shanks are usually made from 1/2" diameter steel and the shank end is only .394" in diameter
Optimized Geometry & Curved Shape
This bent tile chisel is designed to sit flat on the surface of the area that is being scraped or cleaned to work at a convenient angle to the floor. The angled head makes it easier to loosen tiles from wall and floor surfaces, designed for easy handling.
- Single Bevel for Maximum Material Removal
- High wear resistance to extented service life
- Tempered for long life and extended durability
Customer
2025-08-31 17:52:45
It worked perfect for my job
Carlsbad92009
2025-08-29 16:15:35
Using this for 14 inch square tiles demolition. Works great, nice steel. Small size that is ideal for midrange tile removal, 4-12 inches width/square. I advise on the size range if you, like me, likes to remove tiles in their full size versus chipping pieces parts and excessive cleanup. Quality product that is a must have with the angle feature. Makes quicker work for getting to the mortar bed and of course tile removal. lIGHTNING FAST DELIVERY............. was really happy about the quick delivery.
Robert Chumney
2025-07-30 14:30:42
This worked really well for removing ceramic tile. Removed 80sqft. in about 20 mins with no holes in the wall. I recommend this! Btw I was using a rotary hammer drill with hammer selection.
The Lord is my Shepherd
2025-07-26 14:11:07
I bought this for my Harbor Freight (HF) rotary hammer. I wasn't sure when this chisel would arrive, so I started my project with a HF 10 inch, 1.5 inch tile chisel which did a good job getting the tile off my floor. I probably could have finished the job with that combo.When the Firecore chisel arrived I had roughly 25% of my project left, enough to give it a comparative shakedown. It was more or less comparable to the longer yet narrower HF chisel, but of the two I seemed to like the Firecore a bit more. I don't know if it was the wider blade or somewhat sharper edge, bit it seemed a bit easier to get under the tiles I was removing than it was with the HF chisel. Not a night-and-day difference, but notable.The one thing I don't like about the Firecore is it's a bit on the short side. As I press in on a tough spot in the mortar, the chisel breaks through, the hammer moves forward, and with the short chisel shank my fingers end up near or against the debris. Yeah, wear a good set of gloves and it's not a problem, but the longer HF chisel gives me time to ease up before finger surfing in the broken tile.Buuut.... that's the only nitpick. Overall I do like the Firecore - it's held up fine so far and seems to do a slightly better job than my HF bit.
Yolanda Cervantes
2025-07-10 13:11:03
My husband says they are great quality, perfect size, and good price.
Ramon H.
2025-06-05 19:01:54
ðŸ‘
DMD
2025-06-02 11:53:00
Mine arrived with imperfections on both corners. The bag it came in wasn't damaged so it was damaged before it was packaged. I'm assuming the damage must have occurred before it was hardened so I'm keeping it. Both corners of the business end are damaged, like from being dropped. Obviously if this damage occurred after it was hardened it is not going to last very long in use. This is definitely not the quality of the 4 other Bosch chisels I bought at the same time, but it is $10 less than the Bosch equivalent. If I bought this size for daily use, I'd probably spend the extra money to get the Bosch. As it is I bought this one for experimentation and backup purposes. For the price, I guess I can't complain that their QA guy is moving too fast.
Bill
2025-05-03 15:02:20
Fits my demo hammer. Used to chip up some floor tile. It was work but this made for a short task. Seem durable.
Gary Saudade
2025-03-19 12:37:46
Used it for lifting tiles, worked great no problems
michael xenophontos
2025-03-01 10:49:31
very happy with the item and does the job well
B. Cragg
2025-02-18 16:17:22
I used this on a small Harbor Freight SDS demolition hammer to remove 1x1 tiles on a basement floor. I was amazed at how quickly the tiles came up with this tool. It worked really well and made short work of removing the tiles. Definitely recommend.
James Chipman
2025-02-03 18:10:13
Worked perfectly for removing floor tile.
Rebecca Rutzou
2025-01-19 14:01:20
Worked well for the job. Excellent value for $. It broke after used for 8hours but it was a hard 8.
Recommended Products