Your cart is empty.
Your cart is empty.Rock On And rock off, with this snap-fit SPST rocker switch from Gardner-Bender. Rated for up to 20A at 125VAC and 10A at 277VAC. Measures 1-1/2-Inch x 13/16-Inch x 1-5/8-Inch deep, counting the quick-disconnect terminals. UL/CSA..
John Hawkins
2025-07-04 16:39:34
The switch on my 5 year old Harbor Freight pancake compressor went out. Did some searching and found a few options. They all looked the same but this was a much better deal. It is just a touch smaller, but you need to look closely to see (maybe 1/32 of an inch). It snaps right in and does the job.I cleaned and dressed the bearing while it was apart and its back in business. I can certainly recommend on this one.
Rick S.
2025-06-29 16:33:06
This was a perfect replacement for a switch in a decades old multi-power computer/accessory switching platform which has been very useful. As it was the master power switch, it saved the platform (for which no other replacement was readily available.) Very happy to have discovered this part.
Sweeper
2025-06-26 12:49:42
PERFECT! The switch was a perfect match and fit for my Craftsman wet/dry vac. The part was no longer offered by sears or eParts, but with a little search I found this match that fits and works great.
A Mom with Kids and Fur Kids
2025-06-19 17:06:01
Exactly what it should be.I had a small florescent light fixture go out over the washer and dryer. Turned out that the switch died. Little red on-off button just sunk into the rest of the switch. But fortunately for us Amazon has this replacement.Worked like a charm. Seemed to be a quality part and we had no trouble installing it. Fixture is working and instead of paying $30 bucks for a new fixture I paid less than $7.
CFortC
2025-06-17 17:08:05
I have a number of Tripp Lite Isobar surge/RFI suppression units. One thing I've noticed over the years is that the lights in their on/off switches tend to fail. I really like the lighted indication for a live power board so I located these Gardner Bender switches as exact-fit replacements for the original Carling Switch LRA211C.The Isobar units employ removable slide-on connectors for their switch and circuit breaker, so it's straightforward to replace just the switch after removing all covers. You must clip the "legs" of the original busted switch to remove it from the top panel. Note that the Gardner Bender has its Line and Load terminals reversed from that of the Carling Switch. The Neutral connection is the same.
Ralph Ramirez
2025-06-10 10:09:45
Bought this for a broken automotive cigarette lighter tire air pump it worked great and we were able to save the tool that was thought to be trash
jay sysyn
2025-05-19 18:23:56
Fits like a glove.Works well
Anon
2025-04-19 13:26:47
Replaced power switch on an old 14 inch craftsman bandsaw. Dropped right in.
Customer
2025-04-18 15:00:26
a good switch at a good price and shipped quickly.
The Tech Guy
2025-03-03 13:21:08
Before I ordered this switch I purchased a cheaper switch with was only 1 mm narrower but didn't fit so I had to send it back.This Gardner Bender switch fit my popcorn machine perfectly and was an exact replacement and works great.I thought $12 was a bit pricey for this switch when the competitor switch was less than $5. In the end I was happy to pay the extra money because the switch fit perfectly. I would recommend it and would buy it again.
Kyle Nokes
2025-02-14 10:04:21
I used this to fix my Hayward Ultra Pro LX SP2295
Nic
2025-01-31 20:14:08
Exactly what I need to repair my pump !
George Cockburn
2024-12-31 13:26:59
Il a remplacer l' interrupteur d un aspirateur d'atelier Craftsman de Sears datant fin des années 90. Le remplacement était un jeu d'enfant et l'aspirateur fonctionne maintenant à perfection.
Recommended Products
$7.38
$ 2 .99 $2.99