Your cart is empty.
Your cart is empty.Product Description
Muti-use Hand Fuel Pump, a must-have portable tool.
- The syphon hand pump will work efficiently to drain the gasoline/diesel from your brush cutter, lawn mower, snow blower, tractor, reaper etc.
- It is a must-have portable tool for your motorcycle, scooter, car,trunk to keep the engineer running when in an emergency, especially during long drives.
- The manual pump can be a water transfer for the fish tank at home.
- It can even be used to build a portable camping sink for you to wash hands.
Hose Retainer Clip
Adjustable hose clip to secure the hose standing into holder without any spilling of liquid and enables one-hand operation.
Premium Hand Pump
Thick & durable rubber manual pump siphon liquid flows quickly. Two ends of the buld are equipped with metal clips which make the pump and the nozzle tightly connected.
Brass Weight / extender
Brass extender weights hose down into source fluid and cans serve as a hose extender if needed.
Easy to Use
It has an arrow on the black siphon buld to show the direction of the liquid. Connecting the PVC Hoses, putting the upper hose into the source container, a few squeezes of the buld will get the flow of liquid started, put the lower hose into the container, and the liquid will flow automatically.
Warm Tip
- The source fluid should be higher 10 inch or more than the target one, greater height difference, and better suction.
- This portable siphon pump is suitable for various vehicles without anti-theft filter net or anti-spill valve only.
- If the siphon pump hoses have kinks, please try to soak the kink part in a small amount of hot water for 1-3 minutes to resume it, such an operation will not affect the function of the hoses.
- NOT suitable for drinking water, salt water and any chemical liquid.
- Please DO NOT start the siphoning with your mouth, it's extremely dangerous and grossly inefficient.
Necessary check if the pump can't work:
- The source container is placed higher than the target container.
- Both the source and target containers are not in a sealed statement.
- The hoses are not knotted or twisted.
- The two hoses should be installed to the pump bulb. If you only install one hose on one side, it would never work.
- Keep the end of the hose inside the liquid of source container when operating, not just on the surface.
- The indicator arrow which on the pump bulb towards to the flow direction, down to the target container.
Hose Specifications
- Material: PVC
- Outer Dia: 15mm/0.59"
- Thickness: 2mm/0.08"
- Length of inlet hose: 1.2m/47.2"
- Length of outlet hose: 0.8m/31.5"
- Package includes:
- 1 x hand pump, 2 x hoses, 4 x metal clips, 1 x hose clip, 1 x brass extender
Ludwing Vega
2025-08-27 17:14:38
I bought this to empty the gas from my lawnmower and pessure washer for winter. It's easy to use and works very well, the price was perfect as well.
David 204
2025-07-30 11:17:03
Bought this to drain the gasoline out of my tractor and other yard machines for the winter. It works very quickly, great suction, easy to use and put together. Would definitely recommend.
KEITH 76
2025-07-24 15:45:49
Works just fine 100% Satisfied, I was able to pump gas out of a zero-turn mower with no drama.
Al Gozinya
2025-07-07 12:01:33
Father comes well packaged all various accessories and attachments were included as specified. Item goes together easily, do pay attention to the instructions in terms of flow direction. Worked fine for me to empty my motorcycle tank, but requires you to naturally move the tube around to get the residual gasoline out. The one criticism I have, if any, is that the memory of the hose due to how it is coiled in the package makes it somewhat challenging to hold it in position where you want it. But on one end the clip makes that task easier. Good product, decent value, gets it done
Customer
2025-05-23 14:49:14
Kinda wish I'd sprung for for an electric one like they sell for aquariums, because siphoning isn't all that fast. But this works, and you don't have to worry about dead batteries. If they turn off the gravity we'll have bigger problems to worry about. Measure the path you plan to use and consider buying more tubing at the same time. I should have. I had to improvise. Also, if you manage to pull it apart, it matters which way the the parts that connect the bellows to the hoses are oriented. Put it back together wrong and it won't work. Yeah, that's obvious, right? Wrong. It's only obvious after you think about it a moment when something calls it to your attention. Like you did it wrong.
Chris
2025-04-01 17:24:53
We used it to try to remove water from a water filtration system container. It did not work. The end, even with the weight, did not stay down. We are keeping it o try with gas to see if that will work.
John W. Hatfield
2025-03-08 15:22:57
well made. have not tried yet but i know it will do what i want
Charles Edwards Shonkwiler
2025-01-17 17:37:58
Did exactly what I wanted to do good product for the price.
Recommended Products