Your cart is empty.
Your cart is empty.Product Description
Product Features
Supports 10/ 100/1000 Base-T applications
LED indicators power input and PoE output
Internal AC/DC converter no need for external power brick
Easy plug-and-play installation
Muti-protection
Anti-interference protection
ThePoEstore 30watt Gigabit 802.3af/at PoE+ Injector PoE Output :
Pin Assignment and Polarity: 1/2 (-), 3/6 (+)
- Output Power Voltage: Typical:50V, Support any 802.3af / 802.3at device (44V ~ 54V)
- User Port Power Output: 30W max
Protection:
- Over current protection
- Over load protection
- Over voltage protection
Environmental Conditions:
- Operating Humidity: Maximum 85%, Non-condensing
- Operating Ambient Temperature: 0 to 40°C
- Storage Temperature:-40 to 40°C
- StorageHumidity: Maximum 90%, Non-condensing
Input Power Requirements:
- AC Input Voltage: 100~240V
- AC Input Current: 0.5A 100~240V
- AC Frequency: 50 to 60 Hz
Galdor
2025-09-05 11:03:20
I got this to use with a PoE security camera that is hooked up to an NVR. This one particular camera has been giving me a lot of issues where it disconnects and often needs to be power cycles numerous times before it will be detected correctly. Because of its distance from the NVR and the age of both pieces of equipment, I suspected that it might not be receiving enough power. So, I connected this PoE injector between the NVR and the camera and it powered on and connected correctly in the first try. I think this is a sign that it has done exactly what I needed. Time will tell if the camera continues working so well.I picked this one because of the low price but it does have the disadvantage of only supplying a single PoE port. I think for many applications it would be advantageous to get a PoE injector that supports multiple ports.
Mehul
2025-08-27 15:35:50
Used to Power IP camera and works perfectly
oholic
2025-08-26 10:06:36
I got this to provide power to a TP-Link outdoor POE++ passthrough switch. It’s working great with three POE security cameras and a POE access point connected to the TP-Link switch. The POE injector is in my network closet so it has the added benefit of being able to plug into my UPS and keep that part of the network up for a while during a power outage.
vanz2186
2025-07-15 17:54:24
It worked exactly as advertised! This seamlessly allowed my PoE security camera to work with no issues. Really easy to install and it didn’t take much space. It’s well made with a light indicator to let you know if you’re not connected with a red light indicator and if you’re finally cooking with bacon grease with a green light indicator.
Steven Pollard
2025-07-10 19:45:30
Worked as advertised
JC
2025-03-10 18:37:16
Works good for a PTZ camera that peaks about 32W when powering up.
Reviews By Andy
2025-02-22 15:35:34
Bought these to go with a few Meraki Go AP's I bought. They are decent quality and a fair price. I have had no issues with them and would buy again.
DPJ1168
2024-12-18 15:05:58
I ordered this POE Injector a while ago for my PTZ camera. It has worked flawlessly since installing it. I would recommend this product.
discerning_customer
2024-12-16 18:51:54
Works as intended with a Netgear access point.
Laurent
2024-11-25 12:16:37
The POE injector did not work on arrival, it was flashing green and orange instead of a solid orange as supposed to. I had to return it.
Recommended Products