Your cart is empty.
Your cart is empty.Product Description
Brad
2025-09-05 14:33:07
I use 6 of these to hold down my cooler and tool box in my rzr and they do a great job. Rode 100 miles over the weekend on rough terrain and they never came loose and held everything in place. I would highly recommend these for off/on road use
fredted1
2025-08-22 17:34:43
Used these to attach a huge Kolpin cargo box to my Polaris sportsman. Took the rack off the back and turned it upside down on the Kolpin box, and used the blue silicone sleeves as drill guides through the rack. Lined everything up well. These hold well, but I still had to use the kolpin supplied tie down straps to hold it down onto the rack for trail riding. These are really nice hold downs.
Brett Butler
2025-08-20 16:16:46
Worked great for mounting a lounger to a 2023 Polaris sportsman
Kevin
2025-08-15 14:50:53
I used these to mount a Kimpex Nomad storage seat to my 2017 sportsman. I removed the rack, placed it underneath the kimpex seat and marked where my holes will be and then drilled the holes. Re installed the rack in the wheeler and then put two anchors in the rack and used them to secure it. Unfortunately only 2 of the lock n ride holes m lined up with rack, and I had to use 2 u bolts in the rear to the round tubing.Where these secure the rack it appears they are sturdy however there is a little bounce up and down in the storage seat.I may switch these out for bigger nuts and bolts with big washers since it’s a seat. I’m not sure these are the best for the nomad rack as there are handles and I’m afraid in rough situations they could pull it.
Moon
2025-08-10 12:17:11
These have really deep or longer plugs that help them grip better and stay tight.Good product
Caden
2025-08-09 16:28:24
Great quality. Functions great, installation is very easy depending on what you're using them for. I bought these for my 07 Polaris outdoorsman 450 for a back seat/storage carrier (still put some more hardware to hold it down but this made it a lot easier to work on because it would hold it in place - if that makes sense ). Definitely use these!
Super Dave
2025-08-05 18:33:14
Just what i needed. They stay secure.
Ralph Elmore Jr.
2025-07-30 10:04:25
They work very well I never knew they made anchors for the holes in the deck
Tim
2025-07-29 12:27:11
Storage for a wheeler is not cheap. But I got this box at Princess auto in Canada for $30.00. To add stability I bought a sheet of metal and drilled holes to match the anchor points of my CForce 600 touring 2 up four wheeler. Now the anchors are meant for Polaris that has a similar rack system, but their anchor holes are a smidget bigger then the cforce. So on the holes I was using I had to shave down the holes by like 1mm on each side. The anchors now fit in no problem and expand to hold everything in place. I now have a 60l storage box on my bike, it is so far kept all water and dust out and it cost me less then $100.00 to put together. These anchors were perfect, they fit perfect they expand and plug the holes perfect. great value.
Omar Antonio Lara
2025-07-22 15:30:45
buen producto lo utilice para montar un asiento en una polaris sportman 570, quedo muy firme.
Michael
2025-06-20 14:07:02
Great purchase would recommend for anyone with a scrambler (maybe sportsman) hood replaces junk factory clips. Just added a 2†washer over the plastic hood and the knob tightens up better then stock no more shaking hood and worrying about snapped factory tabs. Replaced on 3 Scramblers
luis arturo felix
2025-06-19 18:09:55
excelente producto cumple con mis expectativas gracias saludos
Customer
2025-06-14 18:54:05
fonction tres bien.
Brad
2025-05-25 12:15:53
I use 6 of these to hold down my cooler and tool box in my rzr and they do a great job. Rode 100 miles over the weekend on rough terrain and they never came loose and held everything in place. I would highly recommend these for off/on road use
fredted1
2025-05-13 11:39:52
Used these to attach a huge Kolpin cargo box to my Polaris sportsman. Took the rack off the back and turned it upside down on the Kolpin box, and used the blue silicone sleeves as drill guides through the rack. Lined everything up well. These hold well, but I still had to use the kolpin supplied tie down straps to hold it down onto the rack for trail riding. These are really nice hold downs.
Brett Butler
2025-04-27 14:40:19
Worked great for mounting a lounger to a 2023 Polaris sportsman
Kevin
2025-04-24 18:29:41
I used these to mount a Kimpex Nomad storage seat to my 2017 sportsman. I removed the rack, placed it underneath the kimpex seat and marked where my holes will be and then drilled the holes. Re installed the rack in the wheeler and then put two anchors in the rack and used them to secure it. Unfortunately only 2 of the lock n ride holes m lined up with rack, and I had to use 2 u bolts in the rear to the round tubing.Where these secure the rack it appears they are sturdy however there is a little bounce up and down in the storage seat.I may switch these out for bigger nuts and bolts with big washers since it’s a seat. I’m not sure these are the best for the nomad rack as there are handles and I’m afraid in rough situations they could pull it.
Moon
2025-04-22 17:22:33
These have really deep or longer plugs that help them grip better and stay tight.Good product
Caden
2025-04-20 15:00:47
Great quality. Functions great, installation is very easy depending on what you're using them for. I bought these for my 07 Polaris outdoorsman 450 for a back seat/storage carrier (still put some more hardware to hold it down but this made it a lot easier to work on because it would hold it in place - if that makes sense ). Definitely use these!
Super Dave
2025-04-14 18:34:23
Just what i needed. They stay secure.
Ralph Elmore Jr.
2025-04-10 19:14:51
They work very well I never knew they made anchors for the holes in the deck
Tim
2025-04-07 15:09:18
Storage for a wheeler is not cheap. But I got this box at Princess auto in Canada for $30.00. To add stability I bought a sheet of metal and drilled holes to match the anchor points of my CForce 600 touring 2 up four wheeler. Now the anchors are meant for Polaris that has a similar rack system, but their anchor holes are a smidget bigger then the cforce. So on the holes I was using I had to shave down the holes by like 1mm on each side. The anchors now fit in no problem and expand to hold everything in place. I now have a 60l storage box on my bike, it is so far kept all water and dust out and it cost me less then $100.00 to put together. These anchors were perfect, they fit perfect they expand and plug the holes perfect. great value.
Omar Antonio Lara
2025-04-01 11:39:00
buen producto lo utilice para montar un asiento en una polaris sportman 570, quedo muy firme.
Michael
2025-03-29 10:18:27
Great purchase would recommend for anyone with a scrambler (maybe sportsman) hood replaces junk factory clips. Just added a 2†washer over the plastic hood and the knob tightens up better then stock no more shaking hood and worrying about snapped factory tabs. Replaced on 3 Scramblers
luis arturo felix
2025-03-01 21:30:13
excelente producto cumple con mis expectativas gracias saludos
Customer
2025-02-14 10:43:42
fonction tres bien.
Recommended Products