Your cart is empty.
Your cart is empty.Product Description
Wall Mount PA Speaker Stand
The Harmony Audio HA-WB is a single speaker wall mount stand designed for permanent mount PA speaker locations such as Churches, Schools, Businesses, Bowling Alleys, Bars and Nightclubs. The stand features a 180 degree swivel and a (3) point bolt fixed adjustment for up to a 30 degree angle for either ascending or descending. The all steel construction features a 1 3/8" (35mm) pole mount for a universal fit on most PA speakers.
Specifications:
- Pro Audio PA Speaker Wall Mount Bracket
- Horizontal Pivot Swivel Positioning
- (3) Vertical Locking Positions up to 30 Degree Angle
- Extendable Locking Arm 8” to 12”
- 1 3/8" (35mm) Pole Mount
- Mounting Plate has (6) Bolt Holes
- Mounting Plate Measures 5" x 10"
- Includes Hardware Kit with (6) Wall Anchors & Lag Screws
RC
2025-08-20 14:33:44
Easy to install. Heavy duty. Swivels easily.However, It is a fixed length. It does not "adjust" as suggested.
J. Ganal
2025-08-14 13:05:36
FYI my picture is after I modified the bracket. Only one speaker in the picture has the bracketI needed a strong mount for my atmos speakers. This was a good price and stupid sturdy. I choose this one over the other ones because it has less moving parts.I cut the arm down and redrilled the holes then bolted through a plate that mounted to my speakers. Perfect for my application and well constructed.Solid and reliable. Make sure you pay attention, but the item only comes in singles.
Aaron Martin
2025-08-04 14:42:33
The arm is not adjustable as described. I knew that before I ordered it from the reviews. The arm is 11.5†from the center of the hinge to the center of the speaker post. It swivels nicely without much sag, and has alternate holes to tilt your speaker up or down if needed.The instructions say it’s good with 2 lags into a stud and 2 in drywall anchors. I opted for 3 into a stud and nothing on the other side. I have sideways studs in my studio (3.5†wide), so I put the 4th lag into the top hole, where I have more of the same stud, but the lag screw isn’t long enough to really bite there. It’s just cosmetic until I get a longer lag. Still, with 3 in the stud it feels rock solid with my 10†rechargeable PA speaker on it.I did pop my drywall screws out a bit by tightening it down hard, but that’s because my drywall screws were under-driven at install. Not the speaker mount’s fault.I’m so glad I can swivel my speaker out to turn it on and adjust it, then swing it back to the wall for ideal monitoring in my studio. Not adjustable, but it does the job for a great bargain.
MarkInSJC
2025-07-21 11:09:31
I purchased two of these to support my Genzler AA-Pro combo amp and the matching extension speaker in my home music studio. Very sturdy and of fine construction quality. Very happy with the appearance (or lack thereof) a very nice simple solution and alternative to a floor stand at a cost equivalent to a single quality floor stand. Love these and would buy them again in a heartbeat!
Luis
2025-06-30 15:52:42
Me agrada mucho, porque las bocinas pueden estar en cualquier posición, gracias
Matt Carpenter
2025-05-19 10:09:12
It works but I don’t trust it for my powered monitor I’ve mounted. I’ve got other things plus this to reinforce it. I’m sure it’s great for smaller speakers but bigger heavier powered wedge monitors or pa speakers it seems a little too flimsy for my linking
vallito2000
2025-04-14 19:41:12
Is ok
Customer
2025-03-31 14:36:35
Package came without wrench, screws, bolts and nuts.
RC
2025-03-20 16:59:19
Easy to install. Heavy duty. Swivels easily.However, It is a fixed length. It does not "adjust" as suggested.
J. Ganal
2025-03-12 15:19:35
FYI my picture is after I modified the bracket. Only one speaker in the picture has the bracketI needed a strong mount for my atmos speakers. This was a good price and stupid sturdy. I choose this one over the other ones because it has less moving parts.I cut the arm down and redrilled the holes then bolted through a plate that mounted to my speakers. Perfect for my application and well constructed.Solid and reliable. Make sure you pay attention, but the item only comes in singles.
Aaron Martin
2025-03-09 14:35:40
The arm is not adjustable as described. I knew that before I ordered it from the reviews. The arm is 11.5†from the center of the hinge to the center of the speaker post. It swivels nicely without much sag, and has alternate holes to tilt your speaker up or down if needed.The instructions say it’s good with 2 lags into a stud and 2 in drywall anchors. I opted for 3 into a stud and nothing on the other side. I have sideways studs in my studio (3.5†wide), so I put the 4th lag into the top hole, where I have more of the same stud, but the lag screw isn’t long enough to really bite there. It’s just cosmetic until I get a longer lag. Still, with 3 in the stud it feels rock solid with my 10†rechargeable PA speaker on it.I did pop my drywall screws out a bit by tightening it down hard, but that’s because my drywall screws were under-driven at install. Not the speaker mount’s fault.I’m so glad I can swivel my speaker out to turn it on and adjust it, then swing it back to the wall for ideal monitoring in my studio. Not adjustable, but it does the job for a great bargain.
MarkInSJC
2025-02-14 10:41:00
I purchased two of these to support my Genzler AA-Pro combo amp and the matching extension speaker in my home music studio. Very sturdy and of fine construction quality. Very happy with the appearance (or lack thereof) a very nice simple solution and alternative to a floor stand at a cost equivalent to a single quality floor stand. Love these and would buy them again in a heartbeat!
Luis
2025-02-06 17:22:17
Me agrada mucho, porque las bocinas pueden estar en cualquier posición, gracias
Matt Carpenter
2025-01-27 14:54:06
It works but I don’t trust it for my powered monitor I’ve mounted. I’ve got other things plus this to reinforce it. I’m sure it’s great for smaller speakers but bigger heavier powered wedge monitors or pa speakers it seems a little too flimsy for my linking
vallito2000
2025-01-13 14:00:17
Is ok
Customer
2025-01-07 18:52:24
Package came without wrench, screws, bolts and nuts.
Recommended Products
$49.99
$ 23 .99 $23.99