I had a double wide skimmer on the above ground pool for years, but read how the smaller openings are closer to the water and pull more bugs, etc off the water and they were right.This thing was easy to install, I did cut the opening in the steel and covered the older opening. Works great , no leaks so much cleaner pool now

Great product! I purchased this with the Intex sand filter. I will paste my review from that on here too as it tells my review of both products.Great product! I installed this on my 16' x 48" Intex Ultra Frame pool with no problems. All the fittings where there for this hook-up. It was easy to install and setup for the first time. I just picked up some pool sand from the local pool store, poured it in, hooked up the hoses and flushed it first before filtering the water and left it.I have had the soft side pool for 3 years before buying this Ultra Frame this year and have always dealt with under-sized under-performing pumps that came with the pool. Because of the under-performing pumps I have always dealt with cloudy water, poor circulation, poor pressure, junky paper filters, high maintenance and all the things that come with poor pump flow. After installing this pump though those things are a thing of the past! No more cloudy water, junky filters, poor circulation or poor pressure and less time-consuming maintenance.I would definitely recommend adding the Hayward SP109LC Dyna-Skim above ground pool skimmer (also purchasable from Amazon). There are videos on YouTube that show exactly how to install this on your soft side. The over-the-side skimmer that comes with these pools suck and do not catch any floating debris. This is through the wall skimmer just like hard side pools and works perfectly for my application. Although, there was a little PVC work to get the connection from the skimmer to the new filter discussed above, I am totally in love with my pool again! This also makes vacuuming the pool a breeze too. I purchased a 1 ½” hose from local pool store, a weighted vacuum head and a pole. I can now vacuum the pool in about 10 minutes instead of the normal 30-45 minutes it took before.Crystal clear water, very little maintenance, no debris floating on the surface and easy vacuuming, life is good!

I wanted to write this and add some more information onto some of the other reviews hoping to help others who may be considering this product.First of all, this is a Hayward product. They don't have an impeccable reputation for no reason. The skimmer is solidly built, the door has a clever retaining design making it easy to install/remove from either the inside or the outside of the skimmer, and it comes with the return nozzle and all the fittings you will need for 1 1/2" flexible lines. (Well... except for the hose clamps) The basket is plastic, as they always are, but this one seems substantial and I expect it will take a considerable amount of "empty the basket beatings" before I have to worry about looking for a replacement.As for the specifics of my install... I installed this on a 12' metal-frame Intex pool. (See my customer shot above) Other reviews mentioned this working on similar pools so I tool the chance figuring it would be close. I'm really glad I did. The Hayward was about 3/4" of an inch taller than the crappy Intex skimmer that the pool came with. I simply took the gasket and traced the inside on the pool liner after removing the Intex skimmer. A utility blade made a nice, clean cut taking about 1/2" off the top and the bottom of the opening. I used a drill bit to create holes for the mounting screws as they (of course) didn't line up with what was there.The Hayward skimmer comes with a single, silicon u-channel gasket that fits inside the opening and completely seals it against the skimmer and the face plate. I really like this design because there is no way water is going to leak like you could get when a two-piece foam gasket starts to break down. Assembly was straight forward and except for ruining a socket wrench because I used it underwater on the lower screws, everything went together very easily and was very solid when assembled.The original Intex skimmer had a stand-off on the lower part that kept the skimmer from torquing under it's own weight. The Hayward doesn't have this but it may be something to consider adding. With the pool full, the liner is pushed out and keeps the skimmer upright so I don't think the kick-stand is required in this case but if you drain the pool for the winter, the skimmer may dip and strain the mounts without something to support it. Would this cause problems? Probably not but I don't see a reason to strain the liner if I don't have to. In my case, I used the hose as a means to support it but a block of wood or a piece of PVC would probably do the trick as well.The return nozzle is standard Hayward design. There is a retainer ring with rubber gaskets that sandwiches the liner. Again, on the Intex pool I had to open the hole just a hair (maybe an 1/8" on the bottom) to get the nozzle to comfortably fit. There is a retaining ring on the pool side and an adjustable nozzle that allows you to direct the stream based on your pool configuration. The included hose adapter would position the hose in-line with the nozzle which, in my case, would make it stick out from the side of the pool. I simple got a 1 1/2" threaded PVC adapter and a right-angle to orient the hose vertically. Since everything is standard 1 1/2" it worked great.The last thing I wanted to mention is the vacuum plate. At first glance I was disappointed because the nozzle on it looks to be 1 1/4" and I have a 1 1/2" vac hose. However, on further inspection it is actually a stepped design with accepts both size hoses! Ingenious! I'm happy to say that it works perfect with my 1 1/2" vac hose (with rotating end) giving a nice, snug fit. With a sufficient pump behind the setup, it works amazing.Overall, this is a great product. I'm extremely happy I bought this and I'm super pleased that it works so well with my Intex pool. This was one part of my "sand filter upgrade" that I made to the Intex pool this year and I'm so happy about all of it that I could dance.

👍

Sizlerde prefabrik havuz kullanıyor ve üzerine biriken böcek,yaprak temizlemekten sıkıldıysanız alın kurtulun :))

Brilliant.. was worried about cutting the pool liner.. so took the risk. Upraded to sand filter at the same time. Its impressive.

This was easy to install onto my soft sided 12 by 22 pool. You need adapters to connect to the pool filter but I read reviews and watched YouTube videos before purchasing. Works great. I also use skimmer socks in it and helps immensely.Great product and would highly recommend if you don't have a skimmer

Strong plastic. Good quality. It worked

I had a double wide skimmer on the above ground pool for years, but read how the smaller openings are closer to the water and pull more bugs, etc off the water and they were right.This thing was easy to install, I did cut the opening in the steel and covered the older opening. Works great , no leaks so much cleaner pool now

Great product! I purchased this with the Intex sand filter. I will paste my review from that on here too as it tells my review of both products.Great product! I installed this on my 16' x 48" Intex Ultra Frame pool with no problems. All the fittings where there for this hook-up. It was easy to install and setup for the first time. I just picked up some pool sand from the local pool store, poured it in, hooked up the hoses and flushed it first before filtering the water and left it.I have had the soft side pool for 3 years before buying this Ultra Frame this year and have always dealt with under-sized under-performing pumps that came with the pool. Because of the under-performing pumps I have always dealt with cloudy water, poor circulation, poor pressure, junky paper filters, high maintenance and all the things that come with poor pump flow. After installing this pump though those things are a thing of the past! No more cloudy water, junky filters, poor circulation or poor pressure and less time-consuming maintenance.I would definitely recommend adding the Hayward SP109LC Dyna-Skim above ground pool skimmer (also purchasable from Amazon). There are videos on YouTube that show exactly how to install this on your soft side. The over-the-side skimmer that comes with these pools suck and do not catch any floating debris. This is through the wall skimmer just like hard side pools and works perfectly for my application. Although, there was a little PVC work to get the connection from the skimmer to the new filter discussed above, I am totally in love with my pool again! This also makes vacuuming the pool a breeze too. I purchased a 1 ½” hose from local pool store, a weighted vacuum head and a pole. I can now vacuum the pool in about 10 minutes instead of the normal 30-45 minutes it took before.Crystal clear water, very little maintenance, no debris floating on the surface and easy vacuuming, life is good!

I wanted to write this and add some more information onto some of the other reviews hoping to help others who may be considering this product.First of all, this is a Hayward product. They don't have an impeccable reputation for no reason. The skimmer is solidly built, the door has a clever retaining design making it easy to install/remove from either the inside or the outside of the skimmer, and it comes with the return nozzle and all the fittings you will need for 1 1/2" flexible lines. (Well... except for the hose clamps) The basket is plastic, as they always are, but this one seems substantial and I expect it will take a considerable amount of "empty the basket beatings" before I have to worry about looking for a replacement.As for the specifics of my install... I installed this on a 12' metal-frame Intex pool. (See my customer shot above) Other reviews mentioned this working on similar pools so I tool the chance figuring it would be close. I'm really glad I did. The Hayward was about 3/4" of an inch taller than the crappy Intex skimmer that the pool came with. I simply took the gasket and traced the inside on the pool liner after removing the Intex skimmer. A utility blade made a nice, clean cut taking about 1/2" off the top and the bottom of the opening. I used a drill bit to create holes for the mounting screws as they (of course) didn't line up with what was there.The Hayward skimmer comes with a single, silicon u-channel gasket that fits inside the opening and completely seals it against the skimmer and the face plate. I really like this design because there is no way water is going to leak like you could get when a two-piece foam gasket starts to break down. Assembly was straight forward and except for ruining a socket wrench because I used it underwater on the lower screws, everything went together very easily and was very solid when assembled.The original Intex skimmer had a stand-off on the lower part that kept the skimmer from torquing under it's own weight. The Hayward doesn't have this but it may be something to consider adding. With the pool full, the liner is pushed out and keeps the skimmer upright so I don't think the kick-stand is required in this case but if you drain the pool for the winter, the skimmer may dip and strain the mounts without something to support it. Would this cause problems? Probably not but I don't see a reason to strain the liner if I don't have to. In my case, I used the hose as a means to support it but a block of wood or a piece of PVC would probably do the trick as well.The return nozzle is standard Hayward design. There is a retainer ring with rubber gaskets that sandwiches the liner. Again, on the Intex pool I had to open the hole just a hair (maybe an 1/8" on the bottom) to get the nozzle to comfortably fit. There is a retaining ring on the pool side and an adjustable nozzle that allows you to direct the stream based on your pool configuration. The included hose adapter would position the hose in-line with the nozzle which, in my case, would make it stick out from the side of the pool. I simple got a 1 1/2" threaded PVC adapter and a right-angle to orient the hose vertically. Since everything is standard 1 1/2" it worked great.The last thing I wanted to mention is the vacuum plate. At first glance I was disappointed because the nozzle on it looks to be 1 1/4" and I have a 1 1/2" vac hose. However, on further inspection it is actually a stepped design with accepts both size hoses! Ingenious! I'm happy to say that it works perfect with my 1 1/2" vac hose (with rotating end) giving a nice, snug fit. With a sufficient pump behind the setup, it works amazing.Overall, this is a great product. I'm extremely happy I bought this and I'm super pleased that it works so well with my Intex pool. This was one part of my "sand filter upgrade" that I made to the Intex pool this year and I'm so happy about all of it that I could dance.

👍

Sizlerde prefabrik havuz kullanıyor ve üzerine biriken böcek,yaprak temizlemekten sıkıldıysanız alın kurtulun :))

Brilliant.. was worried about cutting the pool liner.. so took the risk. Upraded to sand filter at the same time. Its impressive.

This was easy to install onto my soft sided 12 by 22 pool. You need adapters to connect to the pool filter but I read reviews and watched YouTube videos before purchasing. Works great. I also use skimmer socks in it and helps immensely.Great product and would highly recommend if you don't have a skimmer

Strong plastic. Good quality. It worked