Your cart is empty.
Your cart is empty.Product Description
A6243L Capacitance Tester
- Display count: 2000
- Capacitance: 1pF～200uF/±(2.0%+5)
- Inductance: 0.001mH～20H/±(2.0%+5)
- Battery Type: 9V x1
- Product Size: 140x70.6x31mm
- Manual Range:Yes
- Data HOLD:Yes
- LCD Backlight:Yes
- Maximum current : 20A
Nashid Abdul Rahmaan
2025-09-04 13:30:19
Meter would not provide any readings when I first installed the leads that come with it. Thought it was a dud. Leads didn't feel quite right when pushed into the meter, so swapped with leads from another meter and measured capacitors again, this time meter worked like a charm. I had to trim some of the insulation from around the male end of each lead because they were not making contact where you plug the leads into the meter. Other than that, this is a nice little meter.
systemguy
2025-08-31 17:10:38
I tried it out on some capacitors that I have and the values were way off. However, I tried measuring with another, less accurate meter and it agreed well with the meter that the marking on the capacitor was way off. Since this meter has better claimed precision, I'll give it the benefit of the doubt of being more accurate until I can find a precision capacitor to measure against. I will also try the inductor measurements now.One gripe was that the screw on the battery compartment was over-tightened and could not be opened with the tiny screwdriver provided. Fortunately, I had a somewhat larger screwdriver that worked.
J. M. van yush
2025-07-26 15:53:39
does the job
Daniel Copeland
2025-06-04 16:33:36
Easy to read and use, the only criticism is that the test leads supplied are too short. Other than that a great product.
Peter van Hoof
2025-05-14 18:40:53
This meter for this low price feels remarkably solid. The backlight button was a higher on the left than on the right side but works perfectly fine. Readings are repeatable and seem to be right on. I'm perfectly happy with it.Follow up: I wish the range for capacitors was a little better. For me 200uF is not great. the inductor range on the low side is also not always sufficient. A commonly used 4k7 (4.7uH) measures as 0.000 mH should have read 0.004 or 0.005
Brainiac
2025-05-03 18:58:50
I found several out of spec capacitors in a function generator and now it calibrates as advertised. Hooray!
jim oliver
2025-03-13 10:51:29
Waste of money. 1 the probes didn't come with. And its way off on tests
David de Jong
2025-02-10 13:19:10
Unsure about long term life.
Ian
2025-01-16 17:07:45
Don't know what it does, but nothing it says it can. Does not measure anything it claims to. Complete scam!Avoid at all costs!
Juan Carlos Ulloa
2024-12-04 16:47:07
El equipo cumple su función a la perfección, aunque me hubiera gustado que tuviera más rangos de medición
Recommended Products
$35.99
$ 15 .99 $15.99