Your cart is empty.
Your cart is empty.Product Description
Gage
2025-09-04 16:36:33
Been using for about a year. Works very well. No issues or complaints.
Customer
2025-09-03 20:20:47
Once you determine which connectors will fit for your vehicle, it is very easy to use.
Gerardo Ruiz
2025-08-29 11:13:17
Awesome tool to have. I have a 2010 FX35 AWD. It fit perfectly. I used the B cap with the B orange adapter. I put the fit ring gasket around the threads then I put the cap on the threading. It fit perfectly. I recommend this funnel bleeder for infiniti VQ engine models.
J. Donch
2025-08-27 12:29:24
Since most current antifreeze products only needs replacement every 5-10 years, changing one's coolant is not a normal "everyday" procedure. However, this is still a very useful tool to have in case you need to replace the thermostat, or perhaps other part of the cooling system which will require "topping off" and bleeding.It works exactly as advertised and makes a one-man operation easy.The instructions are rather basic/non-existent. However, just take a few minutes and it is easy to figure out. I first matched the caps to my radiator and found it required the "A" cap. I then looked for the corresponding adapter (hard to see the lettering), the one with a rubber seal/gasket. The adapter goes into the radiator throat with the gasket facing down and the threads UP. The cap then goes over the plastic threads. Once you verify the proper placement, assemble the needed adapters and filler/funnel. The rest is easy; fill the reservoir/funnel and open the valve on the bottom to let the fluid flow.Once the radiator is filled/burped, close the valve and remove the tool. You can then empty remaining fluid into your overflow tank.NOTE: Just be aware that there will still be fluid in the adapter so when you remove the tool, that fluid will overflow and spill a bit of fluid over the radiator throat (I found the overflow tube in the radiator throat did not alleviate this problem) SO, the longer the adapter you use, the more fluid will overflow.I deducted one star because of this but it is still an easier way to fill and flush/burb your cooling system and I do like it. Everything fits inside the reservoir and is easily stored.
Michael
2025-08-18 18:41:45
As advertised!!
mike lathan
2025-07-23 14:31:26
Work. great just like describe
Customer
2025-07-13 17:20:45
Good tools
Anthony S.
2025-07-11 11:12:34
Well... there are a few issues with the product. 1. The cap had a hard time fitting so "Universal Fitment Applicable to Any Vehicle" is a bit of false advertisement. When I did get it to fit (Admit-tingly Force-ably) or so I thought there was a small leak on the bottom on the cap. 2. After checking for why there was a leak... There was NO RUBBER SEAL! All other caps as for what I seen have a seal on it but this one did not! But other Reviewers had the same issue as well with the fittings/caps. Causing the small leak to come from the bottom of the cap. Where it did fit on without any leak was on the Radiator Coolant Reservoir... 3. A bit disappointing because again it's advertised as a "Radiator Bleeder Funnel Kit" You usually bleed from the highest point which is supposed to be on top of the radiator cap. Not the Coolant Reservoir. Again another false advertisement issue. Not good especially for the price.Do. Not. Buy.
dhb53
2025-06-15 14:37:06
The Horusdy no spill funnel kit worked great on my 2018 corolla, it came with 15 pieces and should work with many different brands of cars. all the adapters will store in the funnel with the tight fitting top it comes with.
JOSE IGNACIO RAMOS
2025-03-31 16:13:25
Facil extraer aire del sistema en una Jeep grand cherokee 2012_ trae muchos accesorios para varias marcas de auto
Customer
2025-03-25 17:34:03
This was heaps cheaper than anything locally, and I have bled many cars with it. Super convenient, and the stop valve works a lot better than some of the other stopper options I have used on other bleed buckets. It just works, and is great for cars with stubborn cooling systems.
Chargr
2024-12-13 18:59:27
Très bon système pour changer l’antigel
Ernesto Cortina MartÃnez
2024-12-07 13:37:50
El plástico es muy resistente
Recommended Products