Shopping Cart

Your cart is empty.

Your cart is empty.

HUANUO Dual Monitor Mount up to 32 inches Screens, Taller Monitor Stand Hold 19.8lbs, Dual Monitor Arm Desk Mount Easy Adjustable with Tilt, Swivel, Rotation, VESA 75/100mm

Free shipping on orders over $29.99

$69.99

$ 33 .99 $33.99

In Stock

About this item

  • Compatibility: To ensure compatibility with the dual monitor mount, your each monitor must meet three conditions at the same time: First, computer screens size range: 13 to 32 inches. Second, screen weight range: 4.4 to 19.8 lbs. Third, the back of the monitor screen must have VESA mounting holes with a pitch of 75x75mm or 100x100mm. We recommend carefully checking that your monitor meets all three conditions before purchasing. If it's still unclear, you can seek assistance from tech support.
  • Customize Your Viewing Angle: The Huanuo dual monitor stand for desk features full motion flexibility with +90°/-35° screen tilt, 180° swivel range, and 360° monitor rotation for landscape or portrait mode. Easily configure an ergonomic viewing angle that can maximize comfort and productivity.
  • Taller Height Adjustment: Featuring a tall 13″ column, this Huanuo dual monitor arm allows you to raise the center of your screens up to 20.87″ above the desktop. This extra-column design greatly benefits individuals who prefer a higher viewing angle or have a taller stature, providing them with more height adjustment options to enjoy increased comfort with eye-level viewing.
  • Sturdy & Durable Construction: The arms of this monitor mount have been tested to withstand 20,000 motion cycles to ensure long-lasting performance. The strong steel frame and C-clamp hardware provide excellent stability even during movement or adjustments.
  • Easy to Install: The monitor stand is simple to set up, with options for either a C-clamp or grommet mount. For the best experience, please ensure your table meets these conditions: We recommend using a wooden table; the underside should ideally be free of any beams or panels that could obstruct installation; and the table thickness should be compatible, with the C-clamp fitting 0.39" to 3.15" and the grommet mount fitting 0.39" to 3.35".



Product Description

dual monitor mount

Create a productive and comfortable workstation with dual monitor stand from HUANUO.

Easy Tension Adjustment

tension

Tension adjustment of gas springs is a breeze!

Please refer to the diagram above for schematic directions to adjust your gas spring, and if you are still confused, please move to our video section for a more direct reference.

dual monitor mount

Taller Height Adjustment: featuring a tall 13″ column, this Huanuo dual monitor arm allows you to raise the center of your screens up to 20.87″ above the desktop. Elevate your screens to save desktop space and enjoy increased comfort with eye-level viewing.

Compatibility Check

Double-check the monitor’s weight and size before purchase a monitor arm:

1. Is my monitor suitable for this dual monitor stand?

You should to ensure that your monitor meets these three conditions at the same time:

1) Each Monitor size range is 13-32 inches

2) Each Monitor weight range is 4.4-19.8lbs

3) The each monitor has a VESA hole(75*75mm or 100*100mm) on the back

After confirming that the monitor informations, we also need to confirm the thickness of the desk:

If you plan to use C-clip installation, the desktop thickness it is suitable for is 0.39″–3.15″.

If you plan to use the grommet installation, the desktop thickness it is suitable for is 0.39″–3.35″.

Desks within this thickness range can be fitt our dual monitor mount. However, we highly recommend using a desk with a solid wood material for optimal support and stability.


JB
2025-08-13 20:51:54
I recently purchased the HUANUO Dual Monitor Mount, and it has completely transformed my desk setup! The assembly was straightforward, and the instructions were easy to follow. The mount is incredibly sturdy, holding two 27-inch monitors with ease and providing a solid, secure fit. I love how adjustable it is – I can easily change the height, tilt, and rotation of my monitors, making it super versatile for both work and gaming.The cable management system is a game-changer, keeping my workspace neat and organized. The sleek, modern design looks great and frees up valuable desk space. Overall, this monitor mount has significantly improved my productivity and comfort. Highly recommend it to anyone looking for a reliable and space-saving solution for dual monitors!
Ryan R.
2025-08-08 15:18:40
My wife and I finally saved enough for a his/hers Gaming setup but we didn't realize how much space the regular monitor stands would take up so I investigated mounting them and since we couldn't find any studs, we went with a regular desk mount.In all honesty, they work as intended, they are very stiff to move which improves longevity. The only flaws in the design I've seen is that the arms slide and tighten separately which leaves 2 separate arms that will sit 1 over the other and the clamp for the desk isn't ideal but you can screw through your desk and mount it that way.IF YOU HAVE A CHEAP DESK YOU WILL GET THE WABBLES! ITS YOUR DESK, NOT THE MOUNTS.Well a little, it's physics at play. If you have a cheaper desk with a rod iron bar like mine, it will be a but less secure but still works. I've had it for about 2 weeks now and I enjoy it, greatly. Now if we had a bigger room...Drink water, change your socks, and touch grass.
BrandoNyc
2025-07-04 18:07:57
Works pretty well and easy to set up. The only issue I have is that the tilt is pretty weak. It doesn't do the best job keeping the monitors straight but if you tilt the screen up and then tighten the screw then when it drops down a little it should be straight.
Jeremy N.
2025-04-11 20:54:46
AMAZING MOUNT!! using for my streaming setup. Great clamp, extremely sturdy and trustworthy to hold expensive monitors.Arms are heavy duty and clamping system is reliable. I wish they would sell extra arms for a third monitor but IDK if it's feasible.Good cost, great looks, easy to install and high quality.
Customer
2025-03-25 10:22:49
I was drawn to this monitor support as it was fitted both with a clamp mount and a flange mount. I had hoped that the clamp mount would work and it did so splendidly.The assembly is very stout and supports the monitors very well. Position adjustment is very versatile.One very nice surprise was the little storage clip for the (supplied) metric hex keys used to adjust the tension and position. The storage clip means that the hex keys won’t end up in the drawer with the pile of others but will always be handy.
Craig Fata
2025-03-24 10:13:01
Works perfectly, easy to assemble and adjust. Finally a product online that works as advertised! Could not love it more!!!
Cristal’s Vanity
2025-03-19 12:04:55
I absolutely Love this! I have one monitor that I'm waiting to get the back piece so that way I can mount it but what you pay for it it's durable, range of motion, and the quality! A must buy
stillclickin'
2025-03-13 12:31:22
Would not recommend purchasing this monitor stand. The monitor stand has been in use five days a week for just under four months.The tension for the horizontal angle rotation is not adjustable. The monitor tends to drift back to the left after the left edge of the monitor is pulled closer to you. The same drift occurs after the right edge of the monitor is pulled closer. The monitors do not remain in position after angling them toward the viewer. The slightest adjustment to the monitor results in it drifting away from the desired horizontal angle. This results in a fidgeting with both monitors for some time to position them close to where they are right.The vertical positioning works well with 15 pound monitors and holds the desired vertical position with ease after the tension is properly adjusted for the weight of the monitor.The monitor stand is clamped to the rear edge of the desk. The base of the stand that sits on the top surface of the desk is about 5 inches wide by 3.5 inches deep. The desk is 3/4-inch pressboard, so a 2x4 was cut to 6 inches long and is used to provide additional stability and strength to the desk.There is a slight amount of bounce with any bumping of the desk. The bounce lasts about 2 seconds and it is not annoying, but it is noticeable.It does not appear to be the clamp or the riser shaft that contributes to the monitor bounce.The monitor stand was straightforward to set up. The Vesa bracket is secured to the rear of the monitor first. The Vesa bracket contains slots into which the mounting plate at the end of the arm slides, so pay attention to the bracket orientation when securing it to the monitor.
David Nixon
2025-02-28 15:37:18
Easy to assemble, well designed and quality materials.
Blubber
2025-02-26 11:35:29
Macht was es soll
Dd
2025-02-24 12:49:17
Impeccable
yuri main
2025-01-15 18:37:20
It's very good, everything works as expected, fairly easy to move the monitors, but my heaviest one wobbles as im adjusting it. not bad just a bit annoying sometimes
AliGregori
2025-01-11 12:14:29
This is a must-have stand if you wanna have the ability to move screens around.
Recommended Products