Your cart is empty.
Your cart is empty.Product Description
With the pole, the articulating monitor arm reaches up to 22.44 inch in height(VESA center to desktop), providing more height adjustments for you. Easily set your monitor to ergonomic height as per your needs. Thus, relieve the strain on your neck and shoulder and keep you healthy and productive.
Is your monitor compatible with this single monitor mount?
Ricardo W.
2025-08-21 13:31:28
I had just recently upgraded to a 34" monitor and was looking for away to add two peripheral monitors to the setup. I wanted a monitor mount that could fit to the side, but also above and behind the main monitor and this accomplished the results flawlessly. Having installed other monitor arms before, the ease of installation for this one was swift and easy. The arm is steady and strong and provides many different angles and movements. I highly recommend the product for its quality, easy setup, and functionality. This adjustable monitor arm should cover all your needs without worries.
Michael
2025-08-15 12:09:04
I've developed some back issues and need to be able to work standing. I started looking at motorized sit/stand desks and stand desk converters, which all seemed over-priced, wobbles, and break after some time. This adjustable mount is a very economical alternative at $38. I'm 5'8", and it raises enough that I can view my monitor standing. My head is slightly tilted down, which is comfortable for me. If you're taller though, it may not work as well as a stand-up monitor. Actually, I would not recommend it for someone taller than myself if you're trying to achieve a stand-up solution. I bought a mouse/keyboard riser as well.The unit is very sturdy once it's all in place - raises and lowers easily after adjusting the tension. Only thing with the assembly is that the screw holes which attaches the clamp to the riser was not threaded on my copy. I'd recommended using one of the screws to thread each hole before assembling, for sanity sake. I added one zip tie, which probably is not necessary. The built-in cable management is awesome!Very happy with this unit. I'm curious to see how long the gas piston is going to last.
ChaseTVGuy
2025-08-14 14:39:55
They say that the setup is very easy, however the instructions are extremely confusing and also seem to leave out what should be left over if you use one route instead of another. It took me at least an hour or two to put this thing together as so many things were left unexplained and up to interpretation. However the arm itself is great, super sturdy, very high quality, very heavy. I trust it to hold my monitor without a doubt. But for those who have trouble building things, this is NOT the mount for you
Rodney E. Fisk
2025-07-30 10:36:30
I have a big 32", heavy, LG monitor. It has an enormous stand, whose foot takes up my whole desk. This beast of a stand fit exactly into the mounting square on my monitor. It doesn't cover, or interfere with any of the connections on the back. My connections are adjacent to the mounting recess. The shipping weight of this monitor is 22.8lbs. Minus the packaging, that puts the monitor in the 19-20lb range (11kg).The setup was easy. It was maybe four steps. It is sturdy, and the gas spring has plenty of strength. The mount allows for adjustment in all directions: rotation, tilt, turn, and height. It will rotate vertically, for portrait orientation. It mounts either by edge clamp, or by drilling a small hole through the desk and bottom clamping. I chose edge clamping. It holds just fine, and sits discreetly off to one corner. I finally have my desktop back!Great item.Great stand.
Malodorous
2025-07-02 15:53:40
(I also own the dual-arm version of this mount and some of the review is the same since the products are very similar)This is a pretty good monitor arm mount. It is sturdy, went together fairly easily, and holds my monitors steady.This company has a version that is identical to this one except it has two mounting arms and the vertical post is slightly taller. The arms are compatible between them. Both are good products despite the Chinesium brand name.When you install this, I highly recommend releasing some tension on the gas cylinder in the arm *before* you take the velcro strap off that holds it tight during shipping.The C-clamp has a very wide range of thicknesses it can work with. Unless you have a freakishly thick desk, I doubt this will not fit.The only other issue I could see is if you have a melamine or MDF desk. These are commonly called "particleboard" and are the cheap stuff from IKEA or Office Max. Melamine and MDF are great because they are dimensionally stable: they do not warp based on temperature or humidity. However, their shorter wood grains mean they are not as strong as real (unprocessed) wood. I custom built my desk out of solid 3/4" (19mm) oak. I have two of these mounts and one of its big sisters with two arms. They are all torquing the wood since the clamps are off-center from the monitors, but there is no warping and everything is straight and level because oak is strong.I am not saying this product will not work with melamine or MDF. It will probably be fine. However, the desk may fail eventually. It might warp from the twisting force of the clamp. It might break - unlikely, but possible. This is just something to keep in mind, and is more of an issue due to the desk, not the monitor arm.
Do not buy
2025-06-13 19:45:10
Very functional and quality monitor. Very good value for the money. The arm is very solid and holds my 24 inch monitor with no problems. Super nice to have such a wide range of motion with swivel left to right and height up and down. Super easy to assemble and comes with a clamp or screw mounting option, so you can choose what you want and switch later.
S. Micale
2025-04-03 19:06:02
Really like this product!. Does what I need it to do and easy to assemble.
Grey Tiger
2025-03-24 12:41:32
Overall I like the monitor it feels sturdy and has a very small footprint. It took me about 30 minutes to set up once I figured everything out and cleared my desk off so 45 minutes total. I use a 27-in Asus ProArt monitor.Minus the 2 Stars because nearly all of the machine screws are visibly defective.One of them was so bent (pic) I couldn't use it. I carry spares so I was able to replace a few but the manufacturer really should supply better quality screws. All four M6 12mm machine screws had visible cheese wedge chunks missing from each of them. And one of the M4 12 screws was so bent I couldn't use it (pic). I will eventually replace all of them.
Dylan Norman
2025-03-23 13:35:50
Bought this for my msi 32" easy to set up and to install the TV to the mount. Very strong and no need to worry about the TV ever falling this thing is built right. Better then those other cheap mounts.
Customer
2025-02-19 20:53:02
Buen producto y te libera mucho espacio de tu escritorio. Yo lo puse con un monitor de 27 pulgadas y funciona muy bien
Erich
2025-02-02 15:54:53
The price was right, and installation is easy, but the build quality is poor. If you need an inexpensive and poorly made/low quality stand, then this thing will work for you. The adjusting screws are difficult to fine tune and don’t really work that well. The only thing good about this item is the price.
Cliente contento
2025-01-17 21:09:33
Tuve un problema inicialmente con el producto, contacté con el servicio postventa y un 10 para ellos, respondieron perfectamente y solucionaron el problema.Por otra parte, el soporte funciona perfectamente para mi monitor de 32 pulgadas curvo de la marca dell.
Carlo Borromeo
2024-12-24 17:48:02
Articolo molto robusto e maneggevole, lo consiglio.
Recommended Products