Your cart is empty.
Your cart is empty.Product Description
The PET+PEI sheet is new in the market and it uses a new technology that is coated on both sides. PET surface with smooth texture and PEI surface with frosted texture.
One plate with both printable sides, it comes with only one plate, without magnetic sticker.
Our double-sided PET+PEI print bed has 3 sizes: 220 x 220 mm / 235 x 235 mm / 310 x 310 mm, which fits most 3D printers.
220x220mm Compatible with:
MK2/MK2A, Anet A8, Anet A6, for Reprap, for Mendel, for Wanhao.
235x235mm Compatible with:
Ender 3, Ender 3 V2, Ender 3 Pro, Ender 3 S1, Ender 3 S1 Pro, CR20, CR20 Pro, Ender 5, Ender 5 Pro, Voxelab Aquila, Voxelab Aquila C1, Voxelab Aquila C2.
310x310mm Compatible with:
CR-10S, CR-10, X40 IDEX, X40V2, KP5L, for Artillery Sidewinder X1, X2, S8 Pro, S8 Plus, TL-D3 Pro.
1 Pcs Double-sided Sheet
One side smooth PET, one side textured PEI. It is so easy to switch between smooth bottom surfaces and textured bottom surfaces.
Steel Plate Structure
Flexible spring steel sheet. A side is smooth PET, B side is textured PEI.
Easy Demoulding
When the building surface has cooled, the print can be easily removed by hand by simply bending the spring steel slightly.
1.2mm Thickness
It provides the most flat build surface, ensuring high flatness for the bottom of print, make sure the model can be firmly attached to the surface of the print platform.
Textured PEI Surface
The maximum temperature of PEI is 260℃. It supports PLA, PETG, TPU, ABS, PC, PU, Nylon etc.
Smooth PET Surface
The maximum temperature of PET is 120℃. It supports PLA.
Gregory P.
2025-09-07 19:38:24
This build plate has perfect adhesion. Even with PEI sheets I found myself using windex, gluestick, or a brim to ensure adhesion stayed true but this one didn't need any of the 3. Initial wash, dry, and wipe down with IPA and it has had superb bed adhesion. Currently only tested with PLA but still. I saw absolutely 0 curling, 0 part removal, 0 issues with the bed itself. Been running parts off it for about a week and other than the pre print wipe with IPA it has had 0 other human interference. The carbon fiber texture and design is also a huge plus. I recently switched a few of my designs over to print face down to save on support material and that finish is next level.If you are looking for a great build plate that has amazing adhesion and a pretty awesome texture I cannot reccomend this one enough.
Michael Hathaway
2025-09-03 14:20:48
This is a great build plate, with a low-texture PEI surface comparable to the QIDI original build plate. The low texture allows materials to adhere better than smooth and overly rough. The textured carbon fiber side is excellent and transfers the carbon fiber pattern well.
John H.
2025-08-02 17:46:27
Update:I amended this review to one star do to poor customer service with repetitive questions and nonsensical replies. I was first contacted and asked to provide pictures to illustrate how the bed has worn (I'm including these pictures) I took them at an angle in order to show how the texture was no longer uniform and heavily worn in spots in the center even though it has only been used for a small amount of prints. Taken from straight on, it just looks like it's out of focus on the parts where the sheet has dulled. I also explained that the sheet was lightly washed with detergent and warm water and wiped with isopropyl alcohol before these pictures were taken to ensure that they were seeing the plate as cleanly as possible. After sending these pictures, I was asked "Do you have them leveled before each printing?" I explained that my bed has been leveled with locking wheels and has a probe to manually check for the z-offset and that this is done for every print to ensure consistent printing results. After that reply, I was once again asked to send pictures. I already sent pictures.I purchased a PEI plate from another company that lasted my hundreds, maybe more, prints over the course of two years. This one has had about a 12-20 prints on it since delivery and you can clearly see spots of wear on it where the PEI is significantly smoother than other areas that haven't had as much printed on it. At this rate, I'll need another in no time. Very disappointed considering that the other one that I ordered prior was a little bit cheaper. Yeah, it's nice that this has two different surfaces but I expect the coated one to last longer.
G Shergill
2025-07-30 14:21:00
The magnetic sheets works great and the plate sticks really well and doesn't move at all. It is such a quality of life improvement compared to clips, and the prints comes right off after flexing it a bit. The rough side works great and leaves a nice finish on the bottom layer. The smooth side for me in my experience has been a hit and miss. For me if I had layer sticking issues a quick clean with dawn and a sponge fixed it. Overall I have been really satisfied with the rough side, no more glues and painters tape trying to get the layers to stick.
Bob W
2025-06-27 16:22:11
Prints adhere well. The carbon fiber texture shows well on my ABS prints.
Delsin
2025-06-17 17:16:08
Love the value for the quality. Fits perfectly on the heating board and the prints come out better than glass. Plus you can just replace them if they do go bad. Glass is a pain but switching to these are better to look at and the ease of getting prints are great.
Jose Petrowski
2025-04-04 12:51:17
Pretty good for bed adhesion, however it is not as big as advertised. I have a Sovol SV03 with a 350x350mm bed and it's a quarter to a half inch short.
Tony
2025-01-20 10:18:16
This bed works on my ender 3, flashforge adventurer 5m pro, and my any cubic pro max, which is awesome. Leaves a very cool finish on my parts, but will say it's hard to get some materials to stick but with some glue I was able to get just about every popular type of plastic to get a good first layer down.
Daniel P.
2024-12-22 17:01:53
Llevo más de 10 impresiones y va excelente con PLA, no hay necesidad de spray adhesivo ni pegamento
PABLO GLEZ
2024-12-02 18:30:48
Muy bien empaquetado y excelente calidad, lo recomiendo.
Recommended Products