Your cart is empty.
Your cart is empty.
Features:
Made of brass and etched with the INJORA logo, solid and abrasion proof
The black hard coating with chamfered edges adds a bright touch to your car, to prevent corrosion also
Heavier weight can lower the center of gravity and improve stability
Extends the distance of the wheel and makes your car more stable and cool.
The wheel spacer fit for 12mm hex rims and is compatible with 1/10 RC Crawler Car Axial SCX10 90046 D90
Specifications:
Material: Brass
Quantity: 4pcs/set
Thickness: 12mm/0.47in
Hex Width: 12mm (0.47in)
Weight: 50g/1.76oz
Package list:
1 * Set RC Car Brass Wheel Hex
Jordan C
2025-09-03 15:23:02
Really nice quality and gave my scx10 wider track width, looks really good. Did not know the hex nut would be a bigger size but I had a driver that fits it. I bought a set of raw brass before so I knew they would work great but the black looks much better. Will definitely buy again!
Dennis
2025-08-09 14:12:59
The hex extenders are very well made, however, the connecting wheel nuts that secure the wheel to the RC model may be short depending on what the wall thickness (cross section) is on your wheels. I recommend taking a measurement and then confirm with the overall length of the screw nut (length is given in the product description) to make sure they will work for your model. Also, confirm that the diameter of your RC models spindel will accommodate the extender. If not, you may have to drill out the inside diameter to get the correct fit, it isn't difficult at all to do. One of my extenders was out of round, I requested a new one from tech support, and they sent the new one out. Overall I'm very happy with the 12mm x 12mm, they provide a nice stance on a 1/10 scale Truggy without overly stressing the suspension.
Judeah brown
2025-08-01 13:56:22
* update. They do fit the gen 7 if you drill out the little lip inside the spacer. Haven’t had an issue with them since. Added updated pics also*They don’t fit gen 7 due to the lip inside stopping the axle from sliding all the way through, other then that they seem pretty solid. Going to drill out the lip inside and see if they work after that. Will update the review if so.
Tj Valentine
2025-07-17 14:58:39
Was apprehensive at first having read something about someone having to bore out the hole. These little beauties fit my Danchee Ridgerunner absolutely perfect!!! Great cost and easy as hell to install. Definitely keeps the tire from rubbing the links and helps the truck perform better!!! Nice looking too. Not much for weight but I just wanted clearance from the wheel/tire rub and it's just what I needed!!!!
Aaron
2025-05-29 15:53:56
I installed these on my scx10 3 and they worked great to gain more flex and my full droop build. I use my crawlers to crawl so making it easier to get on the obstacles matters. Definitely an improvement from the stock width. They are nice and work perfectly no issues with fitment.
K
2025-05-23 14:49:07
I haven't ran them yet but they are installed. They look and feel like good quality BUT be prepared to drill the center of your wheels out. Most 12mm hex wheels has the same sized shaft, these spacers will require you to drill the hole out for the nut to slip through the wheel, also, these are 8mm nuts so VERY tight fit in the bore of my rc4wd wheels causing me to need to fill down a nut driver to fit through my wheel since the standard rc 7mm star tool will not work (this may be different for you depending your wheel setup) LAST they do not fit tight on the center pin though this is not much of a issue as the nut still holds it on. Overall, decent product for the price.
Thu
2025-05-09 15:10:41
These added just enough extra weight to lower the center gravity of my rc truck. They fit nice and snug onto the axles and they look good with the anodized color they have! Super easy to install and super easy to use.
allen brookshire
2025-04-27 10:05:03
Complete junk has to be drilled out to fit and the nuts are too weak
Oliver Kolvenbach
2025-03-09 14:26:07
Verarbeitung und Qualität ist Super.. einziges Manko, die schwarze Beschichtung nutzt sich schnell ab und eine Bedienungsanleitung wäre Hilfreich.. die Fahreigenschaften und Optik ist es wert diese zu kaufen
Kevin Costa
2025-01-21 11:56:16
Great quality
Frank
2025-01-05 13:09:20
Gute Qualität, passt gut alles in Ordnung
SKIZO92S
2024-12-24 10:18:09
Perfect fit on my SCX10.3 BC..You need to cut bumper if you go to largeI run 15mm
ty rook
2024-12-08 15:50:44
These are the best hub extenders I've purchased off of Amazon... The barrel nuts are far stronger than others I've tried... Still though, not auto grade metal. Be careful when you tighten them or they could split.
Recommended Products
