Your cart is empty.
Your cart is empty. Model: HA9010H12SF-Z
Voltage: DC 12V
Current: 0.57AMP
Fan Dimension (L x W x H): approx. 85mm x 85mm x 10mm
Mounting holes distance: approx. 40mm x 40mm x 40mm (Center to Center)
Power Connector: 4-Pin Header
Application:
Work for MSI GTX 1060 Aero ITX
Work for MSI RADEON RX 460 2G OC
Work for MSI RX 550
Work for MSI GT 330
Terry Anderson
2025-06-06 14:19:48
Cheap and very easy install. This fan is better then the fan I originally got with the card.
Vincent Adams
2025-05-13 12:10:25
Happy to report that it works and fits in myRX 560 itx card. Completely fixed the problem because my OEM fan had a bad bearing and lead to overheating issues and loud running. If it dies sometime in the near future, I will update the review, but I don’t see it failing. Be aware that to do this repair you will need to remove the shroud and the heat sink. You will need to purchase thermal paste as well because you need to remove the heat sink to get to the plug. I have attached a picture of the fan that I have replaced, it is a direct replacement and works as intended
Carson Borchert
2025-04-26 10:22:41
This was a perfect replacement for the failed fan on the RX 560 that I bought elsewhere.
Customer
2025-03-23 10:00:11
This was an Exact Replacement for the worn out fan in my MSI1050ti video card. It was a simple swap. Been working perfectly since making the change.
A. Nonymous
2025-02-12 10:22:19
Once I corrected for the incorrect connecotr wiring, the fan worked fine. The fan came shipped with the positive and negatives reversed, so I had to remove them from the connector and swap them then reinsert into the connector. My video card clearly includes a diode so the conductor order DOES matter. Keep that in mind if you plug this in an it doesn't spin when you reinstall your graphics card.
Mr. Rumpstein
2024-12-23 13:30:38
Bought some old video cards and this GTX 460 came in the bunch. I wasn’t expecting it to work but it did. The broken fan actually didn’t sound bad but I took a liking to this card. I pulled it apart, cleaned it, reapplied thermal paste, and installed this fan. The fan has 11 fins vs 9 fins. The 3 mounting holes are off by just a hair but still mounts fine. Sounds good and looks good. Good Windows XP retro gaming video card.
Customer
2024-11-12 17:02:04
Compare the wire colors on your original fan's 2-pin connector to this one before you connect the fan! The neutral and ground wires for the inRobert fan I received were reversed when plugged into my MSI GTX 1050 Ti and, as a result, the fan didn't power on when I started my PC. I had to remove the wire + metal crimps from the plastic housing in the 2-pin JST connector and switch them to get it to work.
Recommended Products
