Your cart is empty.
Your cart is empty.IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. IVY Classic Swift Bore Wood Spade Bits, constructed out of drop-forged high-carbon steel, are designed for the fast, smooth cutting of plywood hard wood and soft wood. These precision ground and polished bits feature double fluted chip removers with sharp spurs which ensure faster cutting with a smooth finish. Additionally, these bits have been electronically heat treated and tempered to a Rockwell Hardness of 47-52. IVY Classic Swift Bore Wood Spade bits are available in a variety of sizes.
Rev. Dave
2025-08-26 11:17:40
Perfect for the job! I used this for a small buffing wheel to clean the inside of a tall stainless thermos mug. (Actually three of them). I was needing a way to reach the bottom of the mug, and the 6 inch size was perfect for it. The 12 inch size is made exactly the same. I have seen two concerns cropping up in questions about these. FIrst... the female end that receives your tool... (In my case a round 1/4" shank/shaft for my buffing wheel)... It is machined to hold hex shank bits, but no worries! It is perfect also for 1/4" round shanks/ shafts. This is because the round type is 1/4" in diameter, while the hex is 1/4" flat to flat, not point to point. The other concern was about the set screw. These are typical allen set screws and the wrench provided is right for the job. They are not "soft". You just need to use your tool properly! With misuse anything can break!. In my case there was one small "adjustment" that needed to be made. ONE of the set screws turned hard, and acted like it was seating before it contacted the shank. By working the set screw back and forth a couple of turns, 2 or three times, it cleaned up what I assume was a burr that initially prevented it seating. NO PROBLEM. This tool was exactly as expected, and anyone used to using tools will have no problem with it! Buy with confidence. It will do the job!
Gerald A. Vanslambrouck
2025-08-02 14:27:57
A perfect tool for installing a peep-hole in a door. Just the right size.
Jason Thomas
2025-07-11 13:56:42
Great until you lose a set screw. At least there are two. Having a hard time replacing the small lost set screw.
Bill
2025-07-07 14:46:33
i checked around locally - every one of these i could find around here were DOUBLE the price of this one.AND - this one is actually of BETTER quality than those i looked at locally.pays to check Amazon - this outfit sure has saved ME alotta money over the years.i wouldn't have HALF the stuff i have in my house if it weren't for Amazon - i mean NECESSITIES, not trinkets or what have you.i'm not a 'moneybags' type person - i have to watch my pennies, and Amazon helps me do that.
Madaline Tyson
2025-06-18 12:21:15
Purchased to make holes in logs to place tea lights for a fireplace filler. Worked perfectly. Great value and fast delivery. Easy attachment for any drill.
Susie
2025-06-14 17:49:23
Goes in the drill no problem
SO Capts Wife
2025-06-01 13:09:23
Zero wobble with 1/4" smooth or hex shaft and the hardened steel set screws make this the one to buy. First use was polishing the insides of old SS Yeti drink mugs. Never could quite reach the bottoms before, 6" length is perfect. Would buy again..but it'll outlive me.
The Shark
2025-05-10 18:24:44
Sharpness is good. Drilled some holes in a live edge walnut 2†slab to insert 1/2†dowels to help stabilize a 1†wide natural crack before epoxy pour. Had no problem drilling walnut.
Mr. G. Munro
2025-05-02 12:45:40
great buy and great price
Eric Sapiano
2025-04-29 17:32:13
Works great - would recommend.
Customer
2025-02-22 14:19:20
Used the extension to extend spade bit to get between joists. Held together fine.
Customer
2025-02-19 11:52:56
Good product at a good price.
Bryan Lansford
2025-02-06 13:33:01
Easy to use. Good value for the money.
Recommended Products
$106.54
$ 48 .99 $48.99
$25.00
$ 10 .99 $10.99