Your cart is empty.
Your cart is empty.Product Description
MULTIPURPOSE DESIGN
The superior groove design of our magnetic vise jaws, gives you a firm grip on your workpiece, while protecting it from damage.
The flat and grooved sides of these vice jaws are interchangeable, allowing you to grip any flat, round or irregular shaped objects safely and securely.
DESIGNED TO PROTECT DELICATE SURFACES
The JCL vise jaws feature a grooved surface specifically designed to keep round or irregularly shaped items in place.
Our vise jaws are made from the highest quality nylon and are designed to secure your workpiece while protecting it from damage.
4 INCH AND 6 INCH VISE JAWS AVAILABLE
No matter what size vise you use, our vise jaws will have your covered. Product dimensions as follows:
- 4 X 1 X 1 Inches
- 6 X 1.25 X 1.25 Inches
EXTRA STRONG MAGNETS
Each nylon vise jaw set has 8 powerful, rare earth magnets.
These magnets are specifically located on the both sides of the jaws to ensure that they will stay firmly in place once attached to your vise.
MULTIPLE CLAMPING ANGLES
Our vise jaws are designed to objects of all shapes and sizes.
Objects can be clamped at vertically, horizontally and at a 45 degree angle, to suit your every need.
CD
2025-08-25 16:26:25
Magnets on top and vise sides. Holds securely
Gilligan's Bluff
2025-08-23 09:42:29
Great. Used on my new 6" Olympia vise I got here. Work great, strong magnets.
HunterIa
2025-08-05 15:28:51
The pads are much harder than I thought they would be. Quality looks good and I believe they'll hold up overtime. I'm not sure they will be practical when working on guns.
Jim
2025-08-03 09:24:47
These are made using a hard material, so be aware if trying to grip very delicate items. But, that is exactly how they are advertised. Magnet strength is good. I used them on a 5 inch vice, so I trimmed a little off both ends. Not ideal, but not a product problem, a vice problem. They still work quite well.
Shawn
2025-08-02 13:13:01
I bought these so I can clamp the barrel of my AR pistol and install a linear compensator. I ordered the 6" by mistake when I have 4.5" vise jaws. Processed a return and ordered the same ones in 4" (the only other size they come in). Even with only partial contact, the magnets hold strong to my vise.
Customer
2025-07-13 14:16:14
I really like the ability to use my new vice without marring or gouging materials being held inplace . This is really a nice feature when using the vice and securing firearms when cleaning.
John
2025-05-16 19:42:29
These vise jaws are well constructed and the magnets hold the jaws securely to the vise jaws.
Andrew
2025-05-10 19:16:12
These are easy enough to install but when you grip something in between them I've had them fall off the vice. While gripping an object I found it helpful to hold them in place with one hand while tightening the vice with the other. I'm on the fence as to whether I want to continue using these or just tossing them in the donation pile. They don't really hold things very secure either.
Tazs bus
2025-04-23 11:18:20
It does what it says on the tin, absolutely perfect
N. Winkelmann
2025-03-27 16:50:00
Well built and solid. They snap magnetically into place on the vise and just stay there. Simplest jaw protectors to use. They allow you to clamp softer materials like wood into a metal vice without damage.
Customer
2025-02-17 11:39:44
Much better than using soft wood blocks, safer in my opinion than using aluminum soft jaws and much cheaper. Worked perfect, magnets hold well so glad I found these
retrosi
2025-02-10 16:01:17
Only one thing could be better, stronger magnets, they do work, they aren't useless far from it but either stronger or a couple more would help.The plastic moulding is great, you can put them on two ways, flat side or shaped for tubing.Just the right amount of give in the mould as well, not too soft nor hard.Defo recommended.
RK
2025-01-18 17:39:54
Jaws tend to slip upward when tightened
Recommended Products
$199.99
$ 84 .99 $84.99