Shopping Cart

Your cart is empty.

Your cart is empty.

Johnson Level & Tool B75 T-Bevel – Structo-Cast Handle, 9', Silver, 1 T-Bevel

5.0 (26) Write Review
Free shipping on orders over $29.99

$8.01

$ 3 .99 $3.99

In Stock
  • CARPENTER BEVEL: Johnson's T-bevel gauge avoids the guesswork involved with angle duplication and the issues associated with analogue readings and manual measurement transfer.
  • DURABLE BLADE: This sliding bevel square has a strong adjustable stainless steel blade that is resistant to rust and corrosion. As a result; the blade can withstand even the most severe abuse and has a long lifespan.
  • PREMIUM DESIGN: The carpenter bevel has a high-impact Structo-Cast handle with a hand grip. Its sturdy locking nut secures the blade in position; ensuring that your work is exact while switching angles.
  • APPLICATIONS: This adjustable gauge is capable of holding and transferring angles between workpieces. It is great for measuring; storing; and transferring interior and outside angles while making cabinets; furniture; and picture frames; as well as laying tile; among other things!
  • PRODUCT SPECIFICATIONS: This 8’’ T-Bevel can duplicate any angle from 0 to 360 degrees. This tool is designed and made in the United States.


Product Description

Johnson Level & Tool B75 T-Bevel – Structo-Cast Handle, 9", Silver, 1 T-Bevel

Amazon.com

The Johnson Level & Tool B75 Structo-Cast 8-Inch Sliding T-Bevel is designed for general carpentry use. The T-bevel has a movable blade that allows you to copy any angle, from 0 to 360 degrees, and transfer it onto other surfaces such as moldings or lumber. This T-Bevel can is designed for durability and easy use, with a high-impact plastic handle and grip, as well as a stainless-steel blade with a wing-nut fastener. The T-bevel is covered by a 1-year limited warranty.


Cameron
2025-08-30 17:10:22
This is a pretty simple Tool that does its job well. All its meant to do is to capture the angle of whatever it is you are measuring and retain it so that if you need to replicate the angle again you can do so with ease. The wingnut on the top of the plastic part makes it easy to adjust but is strong enough to apply quite a bit of pressure to hold the angle without moving. Between the bevel and the slot in the metal piece, you should be able to retain most any angle so long as you have a little more than an inch in the gap of the angle (to fit the tool in).Even though it has a plastic handle I do not have any question about its durability because it feels solid.
~Joel
2025-08-22 10:22:35
I gave it a 5 star review only because folks have now considered a 5 star a product that actually does what it's supposed to do.This product works well. The blade doesn't move when tightened. It works as it should. Nothing more or less. It should be a 3 star review for doing what it should.
D. Siebel
2025-08-20 10:06:39
I bought this tool to use in replacing facia boards around my house and garage. It easily replicated the angles atthe peak and ends of the roofline so it's easy to make the same cuts on replacement boards. The metal portion though is a bit thin, and if it was roughly handled would easily bend. Still a good buy for the money.
ArcticMinibike
2025-08-19 12:21:25
I lost my old T-bevel I had for 40 years. When I went to buy a new one, they were either HUGE (10") or digital. I wanted a "normal" sized one, which is traditionally 8". You can't carry around a 10" in your tool belt and you certainly can't expect a digital one to hold up in the field. This one is perfect. It's sturdy and folds into a compact 8.5" total length when the blade is stored. Made in US is a bonus. It's inexpensive enough to lose but high quality. The wing nut holds tight. I've seen complaints that it's not stainless steel, even though it's marked "stainless". Yes, a magnet will stick, but I researched and there are some stainless steels that a magnet will stick to, so ignore the magnet test.
James S
2025-08-14 13:57:26
This is a very simple tool. No, it doesn't stand out too much from others like it, but it is made in the USA and affordable.
Scrapple sandwich
2025-08-08 14:19:52
Iv always liked using these. Very handy for angles. Light wieght and locks securely with wing nut.
Cameron
2025-07-31 13:21:38
This is a pretty simple Tool that does its job well. All its meant to do is to capture the angle of whatever it is you are measuring and retain it so that if you need to replicate the angle again you can do so with ease. The wingnut on the top of the plastic part makes it easy to adjust but is strong enough to apply quite a bit of pressure to hold the angle without moving. Between the bevel and the slot in the metal piece, you should be able to retain most any angle so long as you have a little more than an inch in the gap of the angle (to fit the tool in).Even though it has a plastic handle I do not have any question about its durability because it feels solid.
~Joel
2025-07-25 10:30:52
I gave it a 5 star review only because folks have now considered a 5 star a product that actually does what it's supposed to do.This product works well. The blade doesn't move when tightened. It works as it should. Nothing more or less. It should be a 3 star review for doing what it should.
D. Siebel
2025-07-18 15:12:11
I bought this tool to use in replacing facia boards around my house and garage. It easily replicated the angles atthe peak and ends of the roofline so it's easy to make the same cuts on replacement boards. The metal portion though is a bit thin, and if it was roughly handled would easily bend. Still a good buy for the money.
ArcticMinibike
2025-07-09 17:28:31
I lost my old T-bevel I had for 40 years. When I went to buy a new one, they were either HUGE (10") or digital. I wanted a "normal" sized one, which is traditionally 8". You can't carry around a 10" in your tool belt and you certainly can't expect a digital one to hold up in the field. This one is perfect. It's sturdy and folds into a compact 8.5" total length when the blade is stored. Made in US is a bonus. It's inexpensive enough to lose but high quality. The wing nut holds tight. I've seen complaints that it's not stainless steel, even though it's marked "stainless". Yes, a magnet will stick, but I researched and there are some stainless steels that a magnet will stick to, so ignore the magnet test.
James S
2025-07-01 17:16:23
This is a very simple tool. No, it doesn't stand out too much from others like it, but it is made in the USA and affordable.
Scrapple sandwich
2025-06-19 11:00:47
Iv always liked using these. Very handy for angles. Light wieght and locks securely with wing nut.
Roger Caron
2025-06-18 14:57:52
This is exactly what I wanted, was happy to see it made in the USA! Should last me a long while! Very reasonable price!
CDP's Onceagain habit of purchasing
2025-06-13 13:37:49
I purchased and received this Johnson Level & Tool B75 Structo-Cast 8-Inch Sliding T-Bevel from Amazon. It is functional, for the not too discerning buyer. The plastic body is functional and will work to catch an angle or set one on a board or a woodworking project. It is just, not a woodworker's type of tool to be proud of. Maybe if you are on a job, working with others where you don't want to loose a really nice tool out of your pouch, this is the one. You would hate to loose a really fine tool, just that this one won't destroy you if it is lost.
Randy Horman
2025-06-12 15:19:32
For a very low price, this simple tool punches way above its weight. I have successfully captured angles of all kinds when building built-in furniture. Very flexible, a veritable gymnast of the measurement tools. Highly recommended.
Marcos Pacheco
2025-05-15 17:55:22
Esperaba algo más robusto, pero el producto cumple con su función y por su precio, creo que se puede perdonar
ketch
2025-05-11 12:09:18
exactly as described ---durable and a handy tool --perfect for my needs --- very happy
Sharon J.
2025-05-08 18:15:31
all tooled up and ready to go
Z.L.
2025-04-04 13:07:48
Does exactly what you'd expect, clamps in place very securely
Roger Caron
2025-04-02 16:42:46
This is exactly what I wanted, was happy to see it made in the USA! Should last me a long while! Very reasonable price!
CDP's Onceagain habit of purchasing
2025-03-18 11:59:21
I purchased and received this Johnson Level & Tool B75 Structo-Cast 8-Inch Sliding T-Bevel from Amazon. It is functional, for the not too discerning buyer. The plastic body is functional and will work to catch an angle or set one on a board or a woodworking project. It is just, not a woodworker's type of tool to be proud of. Maybe if you are on a job, working with others where you don't want to loose a really nice tool out of your pouch, this is the one. You would hate to loose a really fine tool, just that this one won't destroy you if it is lost.
Randy Horman
2025-03-14 16:43:14
For a very low price, this simple tool punches way above its weight. I have successfully captured angles of all kinds when building built-in furniture. Very flexible, a veritable gymnast of the measurement tools. Highly recommended.
Marcos Pacheco
2025-03-12 15:35:42
Esperaba algo más robusto, pero el producto cumple con su función y por su precio, creo que se puede perdonar
ketch
2025-03-02 11:58:40
exactly as described ---durable and a handy tool --perfect for my needs --- very happy
Sharon J.
2025-02-22 16:39:52
all tooled up and ready to go
Z.L.
2025-02-18 15:28:21
Does exactly what you'd expect, clamps in place very securely