Your cart is empty.
Your cart is empty.Product Description
Measuring 9-inches tall, SP9 desktop speaker stands bring your YU2, YU4, or other 3 to 4-inch speakers into better alignment with your ears, letting you capture a wider range of frequencies. Their heavy steel structure and closed cell foam padding further improve nearfield listening by significantly reducing vibration, leaving you with cleaner, more accurate sound. Two top-plate sizes are included, each providing 30 degrees of rotation and featuring a mounting hole and 1/4” – 20 screw to secure compatible speakers in place. For a clutter-free setup, conveniently route your cables through the center of each stand.
Heavy steel and closed-cell foam padding prevent unwanted vibrations by absorbing as much resonance as possible.
Two top plate sizes featuring a mounting hole and ¼"-20 screw are included to fit your preferred speakers comfortably.
Each stand features a hollow support column to conveniently route your cables.
Capture every frequency your speakers have to offer by bringing them closer to ear-level.
Cos
2025-09-04 13:47:48
Solid build quality, very easy to assemble and do cable management. Comes with multiple speaker bases which makes it very flexible to add bigger or smaller speakers. Note the front screw is NOT white it is a regular metal screw, Kanto did some clever editing in their photo.
Kyo
2025-08-19 14:40:29
Sturdy stands. Tad pricy for what they are but aesthetically pleasing for the set up.
J. Roesch
2025-08-17 12:45:33
Many speaker stands consider a nearly square or in some cases even narrow and deep footprint or are not very sturdy. These here are pretty sturdy and the 2 speaker baseplate sizes that ship with the product can be mounted either straight or sideways and in several small angles. Additionally the speaker is held solidly in place with a base screw and the cables can be routed through the stand resulting in a stable and elegant appearance. The screw that mounts the speaker to the baseplate is a bit too long for the Denon Home 250, but it can be easily swapped against the screw that mounts that base plate to the stand itself resulting in a very sturdy mount. Considering some other stands are more than twice the cost, these are certainly worth the money especially as those speakers aren't very cheap either, so a sturdy stand was important to me.
Darren
2025-08-15 17:02:33
I’m using these for my KEF LSX II’s and it’s the perfect complement; it’s modern and sturdy. Definitely no worries about it tipping over at all. Also easy to assemble and attach the bracket to the speakers. The fit and finish of the white ones I got is perfect and looks really high quality.The height of these couldn’t be more perfect too. My speakers are now at the absolutely perfect height to my ears. Especially if you’re using KEF LSX II’s with these, it’s perfectly level with your ears if you use these stands!
Bast
2025-06-27 17:26:35
The first set i receieved were in pretty terrible condition for something that's supposed to be new - both columns had scars where the paint had stripped back to the metal, on the front of stand no less. One also quite a lot of staining and just generally lacked finesse (see image). The top plates were also insanely hard to attach to the column. Finally, attaching the speaker to the stand rendered it impossible to actually angle the top as advertised, unless you left it all loosely attached together. I have a suspicion that the scars at least were caused by the poorly thought through packaging - in the box the columns rest against the mounting bracket of the top plate (the scars and the top plates lined up the box) - i've no idea how Kanto haven't dealt with a very obvious problem - all it would literally need is a thin piece of foam to prevent metal pushing against metal. This doesn't excuse the other quality issues howeverThe second set, by comparison, are immaculate, despite being packaged the same way. There are none of the issues mentioned above. Almost like recieving a prototype then the final productThey're very sturdy, quite heavy for their size and i would say generally are built to last. From a design perspective i can't understand why they didn't put the mounting screw at the back instead of the front because it doesn't center in the hole and ruins what would otherwise be a premium aesthetic. Also the issue with mounting the speaker seeming to prevent rotation of the top plate could be addressed.I can't help thinking that they're $20 too expensive but that goes for many similar things like audioengine's DS1/2 stands, but there really aren't many options in this category in white, so as long you get a pair in the condition you would expect and are aware of their shortcomings i would recommend them
joey
2025-05-12 16:54:55
Love these white stands they fit my Pioneer DJ monitor speakers and match them perfectly in white, also they are very durable and the quality is really good I also highly recommend them.
Peter
2025-04-15 13:40:39
I like the clean modern design, but the fit and finish are subpar compared to my other Kanto products (the YU4 and SUB8). The paint job is bad, the hue of white does not match the one on my Kanto speakers, and the way they were assembled looks a little haphazard. Overall, I am disappointed with the build quality because I was so impressed with my Kanto YU4. I'll keep them because the pros outweigh the cons, but would not recommend them.Pros:* It is made of steel and is sturdy.* It is well designed.Cons:* Paint job has small chips and uneven grainy finish* White hue does not match my Kanto YU4 white speakers.* The pad is misaligned on one foot* Only 2 washers are provided despite the picture in the manual showing 4* Sloppy build quality
Jorge Alberto Mejia O
2025-04-14 11:07:08
Heavy item, sturdy, excellent quality.
Davide P.
2025-04-10 15:54:36
Rigidi e sufficientemente pesanti e stabili, possono essere utilizzati anche con diffusore di marche differenti da quelle per cui sono stati previsti. Facili da montare.
Desmond
2025-03-26 17:20:24
Great looking speaker stands that match my desk!
Customer
2025-03-21 11:37:00
These speaker stands look really good sat on my desk, very stylish and modern looking.Structurally they are rock solid. Assembly is simple and straight forward.Excellent product. Kanto make good stuff (also own two pairs of speakers).
Joseph Brian Fitzpatrick
2025-03-20 17:09:06
Very solidly built (all steel) and thoughtfully designed...with adequate cable management built in and two speaker platforms included -large and small, to accommodate either larger or smaller loud speakers. Add to that ease of assembly and I'm very pleased with the purchase.
ゴミ
2024-12-23 14:33:37
å…角レンãƒãŒå›žã‚‰ã‚“粗悪å“
Recommended Products