Your cart is empty.
Your cart is empty.Kershaw’s TX-Tool is just right for adjusting any Kershaw knife. Whether switching a pocketclip, tightening a screw or adjusting the pivot tension, Kershaw owners now have the perfect tool for most every adjustment. The TX-Tool is a new and improved version of the original T-Tool. It includes five key bits for adjusting Kershaw’s: T-6, T-8, T-10, and a #2 Phillips for most Kershaw knives, plus a slotted screwdriver bit for the pivot of the Kershaw-Emerson products. A magnetic bit driver tip makes changing bits easy and all bits store conveniently inside the TX-Tool's handle. A pocketclip, with a cutout Kershaw logo “K”, makes it easy to carry the TX-Tool wherever you go. Weighing only 1-ounce, the TX-Tool is conveniently lightweight and easy to carry comfortable in any situation.
Steven M. Plemmons
2025-07-24 11:20:41
One of the problems with using the clip to carry my knife in my front pocket is that the clip occasionally gets caught on something and bends it far enough that it won't clip tight any longer. The only way to fix it is to take it off and bend it back. Seems like an easy task, unfortunately because of my own stupidity, I thought the screws were allen head, but couldn't get any of my allen wrenches to work. Thank goodness I finally figured out that it was a torx head. I had a torx bit for one of my screwdrivers at home so I tried it but the screws stripped it right out and I was only able to get one of the two screws out. Ordered this one and it worked perfectly. The clip came right off and I was able to bend it back for normal operation as well as move it to the other side for left hand carry. Very nice design with high quality bits that don't seem to strip easily. So glad that I ordered it.
John B.
2025-07-10 18:20:34
Perfect! what I needed to work on all of my knives!
S. L. Seim
2025-06-02 10:48:44
I have purchased two of these knife Kershaw disassembly tools. One for my son in law, and the other for myself. The reason for the 4 star 🌟 instead of 5 star 🌟 review is the lack of a #1 phillips bit. The tool comes with a phillips, but it is very blunt (#3), and thus will not engage small phillips screws. Emerson knives for example, all have phillips stand-offs and pocket clips. There is plenty of room inside the tool for an additional bit. For the added .19 cents it would have added to the price it seems like a miss ðŸ˜. Like most people, I use this tool for tasks in addition to knife repair/cleaning. It's a decent product for the money, but falls a little short. Pluses: Knurled grip, price, and sealed bit holder. Minuses: Could have included another bit or two.
Michael
2025-05-31 18:43:01
Had a pocket knife with a loose pivot screw and picked this up as a budget friendly option to do a little maintenance work. It did the job perfectly. The bits aren't the most robust available, and I might wish for a 360 rotation end piece instead of the screw cap that can sometimes come loose when using, but overall this is a great compact tool for basic folding knife maintenance. If you need something to do a lot of work, I'd probably recommend getting something more expensive, but for a small tool used for occasional or emergency maintenance work, this is a great portable option.
Pesach.
2025-04-21 18:09:05
This is a compact screw driver with interchangeable bits for working on knives. Quality materials. Well designed and manufactured. Very versatile. And easy to use. Highly recommend.
2green
2025-03-28 11:43:25
Good, solid, exchangeable bits, saved me by removing screws that another cheaper set had rounded off and left me fearing they were stripped on a Spyderco para 3.
Ronald W. Shea
2025-03-20 20:51:23
Like their super knives, this tool is Super!
DIZ
2025-03-08 09:32:25
My first decent pocket knife was a Kershaw Leek about 13 years ago - I have purchased many other higher end knife brands since that day and Kershaw has been a name I have trusted since day one - I stick exclusively to USA made Kershaws nowadays if I do buy them but I have gotten one or two of their cheaper produced china line knives in the past and was pleasantly surprised by the quality for the price - I guess since I have trusted the Kershaw name for so long now, I had a bit higher expectations for this tool - I will say for $13 I honestly didn’t expect awesomeness and assumed that it was a China made Kershaw product (which it is) but since the couple of China produced knives of theirs I had gotten in the past were decent, I figured that this item would probably be fine as well … and IT IS OK, just ok - All of the bits were there and store conveniently inside the body - They don’t appear to be as defined as a decent precision head tip but they all seemed to fit correctly - The bits attach to the driver magnetically fine as well - Though, while using the bits in the driver there is an annoying amount of play in the tip while turning … too much play for my liking when it comes to such small screws - Aesthetically it is gaudy looking as well - Ugly to the point I can’t believe Kershaw would have ever green lighted the design of this thing - It seriously looks like a cheap impulse item that belongs sitting next to the self checkout section at Walmart for $5 - The body is all metal and feels cheap - Personally, I absolutely hate the feel of this thing between my fingers - No grip at all and for some reason they decided it was a good idea to put these ugly rings all around the body - im not sure if the rings are supposed to be for grip or aesthetics or what, but they don’t serve either purpose, or any purpose to me at all; it just feels like sharp uncomfortable edges all down the shaft - After receiving it and messing with it for a few minutes, I just stuck it back in the box and started the return process - This was actually just intended to be a tool for my brother who recently got a nice Benchmade 940 that may need tuning here and there and he doesn’t own a torx set - So, I figured this would cover the simple basic sizes that most knives use for a decent price - I got back on Amazon and found a much better looking 24 bit torx set for $10 that he will now be receiving instead - This Kerchina thing will be going back on the shelf at the Amazon warehouse!
er
2025-02-26 17:27:22
Pues los bits que trae bien, excepto de torx número 6 que, como pasa siempre, es muy flojo y se deforma de inmediato, quedando inutilizable. Si prescindes de ese torx 6, el resto bien.
Jovani
2025-01-26 18:54:36
Una herramienta perfecta para dar mantenimiento a las navajas, muy práctica y resistente, gran calidad de materiales.
jpsoarer
2025-01-24 15:38:02
Bottom of the barrel Junk, but more importantly IT’S COMPLETELY MISSING THE BLOODY T6 BIT!!!! When I contacted the muppet that sold it, got no response.If you want to throw your money away, just throw it away, don’t buy this crap, at least then it might be used for something more useful… like drugs and alcohol or something to distract you from not fixing your knives.
Bill P.
2024-12-06 09:48:52
Compact well machined screwdriver that has all the bits I require for my Kershaw knives. Perfect.
Chescomas
2024-11-20 14:07:18
Muy útil, trabaja bien y tiene un diseño atractivo. Lo único que le falta es una herramienta o punta mas chica para cubrir un mayor rango de tornillos.
Recommended Products
