Shopping Cart

Your cart is empty.

Your cart is empty.

K&N Cold Air Intake System: High-Flow Air-Filter, Increase Performance & Horsepower: Compatible with 2015-2021 FORD F150, 63-2593

Free shipping on orders over $29.99

$299.99

$ 99 .00 $99.00

In Stock

1.Configuration:50 State Legal


About this item

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
  • DYNO TESTING YOU CAN TRUST: K&N air intake horsepower/torque testing is performed on wheel-based dynamometers and the reports are included with each intake system.
  • BETTER TOWING: K&N Air intake kit improves acceleration and uphill performance when towing by improving throttle response, overall horsepower and torque. Excellent for daily and highway driving.
  • PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle.


K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your vehicle and is dyno tested to provide a guaranteed increase in horsepower. It features a high flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This Intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty. Not legal for sale or use in California on any pollution controlled motor vehicle.

Compatible Vehicles:

  • 2015-2021 FORD F150

DabNewton
2025-08-11 17:52:37
Fun wooshing sounds! Easy to install if you can follow directions and have half a brain. Didn’t come with the rubber gasket for the bottom of the enclosure so that wasn’t good.. but I don’t think you REALLY need it. Works great. I’ve read that some people’s engine light came on after Install, wasn’t the case for me. Slowly gave it more and more gas over time to make sure it was installed properly and whatnot. Now I can floor it on a whim and not think twice about it. Works like a charm. Tighten everything snug AF, and really jam the air sensor thing in the rubber hole you install. Don’t break it, but support it with your fingers and jam it in there. I bet that’s where most people went wrong, too loose. That’s what she said. Can definitely feel a little extra give in the higher rpms. My F-150 is tuned so there was a ton of torque before and there’s still a ton now so there’s that. Worth $400 bucks? Little steep on the price ngl. I’m sure there’s a cheaper option for nearly identical results. Nonetheless K&N is a great name brand and it definitely looks, sounds, and feels cool. Oh yeah, and if you cruise control the speed limit on the highway, you can get 1 more mpg pretty reliably. If you just drive without cruise control, it’s hard to tell any difference in MPGs. Enjoyyy
Customer
2025-08-08 18:22:07
Cleans up engine bay nicely. There is a noticeable difference in power and throttle response which definitely makes for a more fun driving experience. Don’t get this expecting massive power gains like you’d see out of a tuner, but you won’t be disappointed. The sound difference is huge, and you can really hear the turbos spool up and the blow off valve. Install is easy and straightforward, I completed my entire install in roughly 15 minutes after about 20 minutes of assembly. Worth every penny.
Samantha
2025-07-28 18:31:47
I saw a bump of 2 MPG which is not a lot but it adds up. More responsive when you step on it but be cautious no to over do it or no MPG increase... Overall great product... More MPG great throttle response and sounds great... Install was easy careful switching over the sensor.
Andy Tran
2025-07-25 16:59:38
It’s awesome, I can feel the different right after I took the test drive when I have the KN air intake on my truck. Better in throttle response, horse power and sound good. So, just buy it, easy installation, the instructions is included in the box. Time to remove the original intake is 5 minutes, and install the KN is from 20 - 30 minutes including reading the instructions.
Jon H.
2025-07-11 12:28:21
Awesome intake for the price! It only took me about an hour from start to finish with minimal tools. Everything for perfect and I didn’t run into any problems. The increase in sound is VERY noticeable and I love it. I also can feel a slight increase in acceleration! The ONLY thing I wish they would have done is apply the rubber lining/seal in the factory. It seems like something they could have done during the making. Overall it’s a great buy and I highly recommend!
JFM1821
2025-05-28 17:49:47
Awesome intake for 2018 Ford F-150 2.7L Ecoboost! Had k&n drop in filter before and didn’t know how much more power and sound the cold air intake would bring me, boy was I happy after I installed it! The turbos are a lot louder as well as the engine really sounds like a big V-6 or even V-8! Makes your exhaust louder also with the increase of air flow. I have a SCT BullyDog BDX programmer in my truck which added insane amount of power. I didn’t think this would help with even more power but it truly did! Felt like it easily added the additional 20hp/30ft-lb torque as well! I don’t really notice better fuel mileage but I think that’s due to my SCT programmer. But I didn’t buy this for increase of gas mileage, I did for power and better sound. With both programmer and intake I still get around 20 miles per gallon on highway. Awesome intake by K&N, and for people that say it’s made cheaply with plastic piping their stupid. The plastic piping is extremely strong and it’s design is to keep heat down from intake air temps. With metal piping it gets hotter and causes loss of power. It’s design is specially made to use the factory bottom end of intake so you can benifit from the cold air vent on the factory intake. It just sits in and flips to factory box perfectly. Great product worth the $260 dollars which is one of the lesser priced cold air intakes for the F150.
Climbyourarms
2025-05-18 16:33:01
Install was a snap. At first I wasn’t impressed with the sound, but when you get it out in the highway you can really hear this thing move air! It was pretty surprising. I have the 2.7 EcoBoost and even with that little engine you can hear the turbos spool up pretty good, you can even hear them blow off if you build up some boost and let off really fast. As for mileage and horsepower? Meh, I can’t really tell. It doesn’t help that I’m getting to boost more than usual now. Haha. As for power gains, this truck was pretty peppy to begin with but I can definitely confirm it didn’t lose any.
EG 62
2025-05-17 19:39:28
It was easy to install, and it looks great in my 2017 F150 XLT 2.7 ECOBOOST.Didn't notice much change on the sound, minimal. However the increase on the gas pedal is very noticeable. I accelerate quicker and smoother. My truck really moves quick. Just 2 days installed, not enough time to evaluate mileage. But like the box says " guaranteed to add HP it does!
Peter Sarmiento
2025-05-11 13:38:48
Great product, super easy to install DIY
Gabriel Robidoux
2025-04-20 16:18:20
J’adore le résultat
raymond barrette
2025-04-18 18:10:58
facile a instaler fit bien bonne performance
Andrew
2025-02-17 17:29:41
Solid kit, decent intake. Kinda wish it made a little more sucking noises on this ecoboost, but it does feel like I picked up a few hp up top, economy is the same after 4k kms
Shane funke
2025-02-03 14:16:27
Was missing parts so not a good start right away. It was just the lower seals so I found foam tape to make it work. But I can’t notice any difference in sound unless you remove the turbo silencers but you can do that with the stock air box and it sounds the same. As for performance hard to say definitely not noticeable but I didn’t expect much in that department. I mainly wanted it for the sound. Biggest waste of money. Should have went with the Injen intake they use the dual tubes for each turbo so you can remove the silencers, so you get that louder turbo sound. I think it creates too much turbulence if you remove them on the k&n single oem copied tube.Used to always buy k&n for all my vehicles this will be the last one. Do yourself a favour and stay away from this one.