Shopping Cart

Your cart is empty.

Your cart is empty.

K&N Cold Air Intake System: High-Flow Air-Filter, Increase Performance & Horsepower: Compatible with 2019-2022 RAM 1500; 2019 DODGE 1500, 77-1578KP

Free shipping on orders over $29.99

$399.99

$ 99 .00 $99.00

In Stock

1.Style:Dry Flow


About this item

  • GUARANTEED INCREASE IN HORSEPOWER & TORQUE: K&N cold air intake systems provide a less restrictive path for airflow, increasing the volume of cool, oxygen-rich air into your engine an increase in horsepower and torque
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed
  • HEAR THE GROWL: K&N’s intake systems allow your engine to breathe and sound as it should- your engine will growl on acceleration and return to quiet once at speed
  • BETTER TOWING: K&N’s cold air intake kit improves acceleration and uphill performance when towing by improving throttle response and overall horsepower and torque
  • FEATURING K&N’s SIGNATURE, REUSABLE AIR FILTER: Combines 4 layers of pleated, breathable cotton with K&N’s red filter oil to absorb dirt and dust particles, allowing clean air to continue flowing into your engine, only needs cleaning every 100,000 miles


This K&N cold air intake system is engineered for your vehicle. A mandrel-bent aluminum intake tube helps increase the volume of airflow to your engine and provides a guaranteed increase in horsepower and torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter™ featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed open heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes. Not legal for sale or use in California on any pollution controlled motor vehicle.

Compatible Vehicles:

  • 2019-2022 RAM 1500
  • 2019 DODGE 1500

Ron
2025-08-18 14:03:12
K&N 30-1578 Performance Air Intake System, Dry Flow.I installed my system on a NEW model 1500 RAM Limited with the E-Torque Hemi.Purchased a Dry Flow intake so I would NOT have to clean and oil the filter. It also has the plastic or Roto-molded intake tube. I essentially followed the advice given by AKT in his review.Go slowly and FOLLOW the directions. Uninstalling the stock air box was the hardest part as I was really trying to not break any plastic parts. Everything else was easy and done quickly. The first of two tips I can give is to remember, or take a picture with your phone, of the air sensor position. It is reinstalled using a rubber grommet and can be easily turned to the correct position in the intake tube. The second is to go slowly when installing the K&N air box. Be sure to line up the intake opening in the air box with the grill intake as these two mate with a foam seal that seals everything off from the engine compartment.My wife was surprised when I came in from the garage as she thought I would be hours installing the K&N system. More good news is that after a week or two my mileage is inching up. I was getting an average of about 14.5 around town with the stock system. I am now getting 15.7. This is looking at the mileage compiled by the RAM, no scientific measurements.I have noticed better acceleration, a little better mileage but I really wanted this system for the torque gain when I tow a trailer. It does sound louder but not very much compared to my old GMC with K&N intake with an oiled filter when accelerating hard. It is quieter when cruising (about like the stock system) and my wife likes that. I will update this portion of my review when I take the trailer out in the spring.I’ve been using K&N products a long time and have never been disappointed.Friday, 3 May, 2024It has been a few months now and I need to update my review. I cannot talk to increased torque, but my RAM truck is telling me my mileage has increased. The driver information center is saying I am getting a solid 15.9 mpg around town, up from a 14.4 mpg with factory intake. The really funny thing is at 70 MPH my indicated mpg goes up to over 20! At 60MPH I am getting an indicated 18+. These are the averages given out by the Ram info system. I did NOT manually calculate the mpgs given.
Runningboy150
2025-08-16 17:05:12
Just bought and installed this Cold Air Intake (aluminum tube) on my 22 RAM 1500 5.7L. The install only took about a half hour. I'm certain it could have been quicker, but I took my time and followed a video on YouTube. I preferred that over following the directions provided. To me, they weren't detailed enough. The video set me up for success and was easier to follow when I needed a reminder of the next step. Once install was done, I started the truck and it purred. I had taken it for a drive the night before and yeet around listening to the sound and getting a feel for the vibes and handling. I noticed a difference immediately. The truck definitely has more power. As I took the first turn on to the interstate, I was a little ambitious with the accelerator and actually got a little spin at speed that made the truck work a bit. The Mikey Thompson's were gripping the road and it felt great. The sound was so good. I could feel the grin on my face and headed straight for the interstate, and open roads. I tooled around for a while and was consistently surprised by the difference. The truck was good as it was, but now it's great. I'm excited to tow. The trucks name is Sass, she's living up to the name now more than ever. I couldn't be happier. I was looking at different option, and now I don't feel like throttle controls and what not are necessary. I'm happy and even more excited to drive my truck!
Doug B.
2025-07-09 15:36:33
I love this thing. I installed it in less than 10 minutes. Previously, I tried a cheaper manufacture but it didn't fit so I returned it after trying to make it work for more than an hour.Right after installing it, I drove my truck and pulled a car hauler type trailer to pickup an industrial generator. The route was mountainous and my destination is about 7500 feet. I got 14.5 miles to the gallon and I don't drive slowly. I am not sure how much better my gas mileage is now but I am guessing around 2-3 mph better. The hemi sounds great! I highly recommend this product.
Trey Harrison
2025-06-10 16:30:09
Awesome throttle response with HP and torque gain. This is a good first upgrade for your vehicle. Very nice mod. I gave it a 4 star just because it's not totally inclosed.
Jxrdxn
2025-05-25 14:49:31
Felt a INSTANT horsepower and torque difference as soon as i installed. The sound also became more aggressive from the engine. And fuel efficiency definitely improved. Install took less than 30 minutes. 10/10 product
Beth MacNeil
2025-05-11 16:18:31
Super easy to install
Ken Grant
2025-03-17 16:08:55
Works and sounds great.
Robbie ledrew
2025-02-18 11:08:37
So glad I bought this addition for my gen 5 ram 1500 . 45 minute install with nothing but Allen wrenches and a screwdriver . ENGINE IS VERY LOUD AND AGGRESSIVE and gives you that nice whistle on acceleration. Very impressed great product from K&N
Mohamad Tartoussi
2025-01-01 12:32:15
Delivery came earlier then expectedProduct was pack in very professional waySound amazing you can feel the HEMI is finally breathingStrongly recommended