Your cart is empty.
Your cart is empty.Product Description
3Pcs Oxygen Sensor Socket Set
1pc 1/2" Drive x 7/8" Vacuum Switch Socket, 2pcs 3/8" Drive x 7/8" O2 Sensor Sockets
Constructed of vanadium & molybdenum steel for strength & durability & a black oxide finish.
The hardest part of changing an O2 sensor is removing the old sensor, but with this tool the sensor will get out easily.
The long socket can be used to remove the sensor & the short for tightening.
Two offset sockets, in 3/8 Drive and 1/2 Drive, allow for more comfortable angles in hard to reach places
The 3/8 Drive deep oxygen socket is able reach sensors that are further into the vehicle
This O2 sensor socket kit's cutout design enables the sensor remover to remove the O2 sensor without the need to cut any wires
Andy
2025-09-01 16:52:19
Worked great, no issues
Socal Ryan
2025-08-31 11:56:58
I needed to replace my o2 sensor and I remembered I loaned my tool to an old friend who never brought it back so I ordered this tool and turns out it was a great buy. Works great.
Juan Salvador
2025-08-20 11:59:41
The is was as easy and affordable.
Ed
2025-07-03 17:53:17
These are a good value and work good. A nice addition to my toolbox.
Customer
2025-06-21 16:21:07
Excellent
Flipnme
2025-06-08 17:15:29
Used to remove the upper 02 sensor on a 2010 Ford f150. The tool was a perfect fit. Bit of advice, spray penetration oil and use a pipe or some sort to extension on your rachet. Also, electrical connection was a pain to remove because of the cramped space but with some patients it can be done.
Tina Goodrich
2025-05-28 21:56:09
I can say it did work although it was slipping while removing sensor. It was not stuck or frozen just tight. I could only use 1 tool on my car the other 2 did not work not because of tool but position. For price I will keep them and maybe use a small hose clamp around cut out to prevent spreading.
Light blue
2025-05-14 13:28:28
Keeping it even though it’s really meant for one time use. You need definitely prying bar for this tool, well at least for my situation
Claud R.
2025-03-10 18:46:25
Very good kit for O2 sensors. All sockets are 22mm.The long silver one and one shorter one both fit a 3/8†adapter and the 2nd short one has a star pattern that takes 1/2†adapters.Made or chrome vanadium.Should last a long time.
Customer
2025-02-02 13:34:06
My Honda CRV has 480K on original exhaust so paid a bit more for this kit hoping it would work on upstream sensor. I ended up using the short 1/2 inch with a long bar and it worked. O2 sensor was a little rounded but it came out.
Dwayne
2024-12-27 13:32:17
The media could not be loaded.
Recommended Products
$16.99
$ 7 .99 $7.99