Your cart is empty.
Your cart is empty.Product Description
LainKeen 9 PCS Harmonic Balancer Puller Remove Extractor Kit Set Tool
This tool set was Designed for removing damper pulleys in tight engine compartments without removing the radiator. This pulley is hard to access and remove dute to space limitations in and around the engine compartment.
Application:
- compatible with GM 5.7L V8;
- compatible with GM 2000 and newer 4.8L, 5.3L, 5.7L, 6.0L, 8.1L V8;
- compatible with Cadillac 4.5L, 4.6L, and 4.9L V8;
- compatible with Chevrolet trucks (2003-) 4.2L I6, (2004-) 3.5L I5, (2005-) 2.8L I4;
- compatible with Ford (1995-) V8 engine;
- compatible with Mitsubishi Eclipse (1995 - ) 2.0L DOHC non-turbo.
Why Choose Us?
- Make Your Job Easier !
- As a professional manufacturer of automotive tools, we are driven to provide top quality products and wonderful user experiences for both professional and amateur mechanics.
- We have and we will work hard to support our customers by providing quality products.
9 PCS Harmonic Balancer Puller Remove Extractor Kit
Specification:
- Scope of Application: Universal for vehicles
- Two different jaws:3 thicker jaws fit older vehicle and 3 thinner jaws for newest modles
- Item Type: Harmonic Balancer Puller
- Material: high hardness Steel
- packing list
- 1 x 3-jaw puller with another 3 jaw to replace
- 4 x forcing rods
- 1 x forcing screw
- 1 x carrying case
Instructions for use
step 1
After removing the drive belt from the pulley, use a ratchet wrench to remove the pulley center bolt.
step 2
Select a top bar from the kit and insert that push bar into the center bolt hole of the three-jaw puller. Then lock the three jaws of the puller behind the pulley.
Note:The length of the push rod must be the same length as the puller jaws to engage the pulley.
step 3
Position the puller/pusher assembly onto the pulley.
Ensure that the jaw puller is firmly engaged with the back of the pulley.
step 4
Using a 3/8" center fly wrench or 19MM, the Slowly turn the center bolt to apply top bar pressure and the pulling horse slowly pulls the pulley out.
step 5
Continue to turn the extractor center bolt until the end of the extractor disengages.
MULTISERVICIOS MC.
2025-08-22 21:03:47
Super práctico y fuerte
Alexis zuniga
2025-07-29 18:23:46
Excelente
haineswifey
2025-06-08 11:07:36
Good quality for a fair price. Works great
karen
2025-05-08 10:36:47
works great
Michael Arthur
2025-03-21 16:36:51
Made getting mine off easy. 2010 jeep liberty 3.7
josh l.
2025-02-20 11:16:25
Opened it up and one the fingers just fell off. Looked and the ball in lock pin was missing. And the set of fingers the grbs from the outside of pulley look like junk not ground or anything. Had such high hopes for this product to.
Melissa Capps
2025-02-09 15:59:01
Pulled as intended and had no issues.
Jerry
2024-12-21 12:19:07
Received package in good condition - fast shipping,Well presented in it's shipped solid plastic box - lots of good cardboard boxing to protect item in shipping,A little bit dirty with oil, but cleaned up nice - no rust,The smaller 3 fingers set in the photo listing are a steel casting, not the same as the lager fingers which look more like there machined, could always file them if needed to fit project,The smallest rod came a little warped/bent - not a big deal - shouldn't effect performance of tool,Appears to be a good value for the price,Didn't stress test tool, will update if a product quality problem comes up,
Recommended Products